Day: November 20, 2020

4928-87-4, Adding some certain compound to certain chemical reactions, such as: 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4928-87-4.

To a reaction of 1/7-1, 2, 4-triazole-3 -carboxylic acid (113 mg, 1.19 mmol) and 3- (trifluoromethoxy)benzylamine (250 mg, 1.31 mmol) in dry DMF (10 mL) was added 1- hydroxybenzotriazole monohydrate (200 mg, 1.31 mmol) and EDC (N-(3- Dimethylaminopropyl)-N’- ethylcarbodiimide) (251 mg, 1.31 mmol) followed by N- methylmorpholine (0.52 mL, 4.76 mmol via syringe). The mixture was stirred at room temperature under nitrogen and the solids were gradually dissolved. The contents were stirred at room temperature for 24.0 h, and then slowly diluted into iced water and extracted with DCM (2 x 50 mL). The DCM phase was washed with ice cold water (2 x 100 mL). The DCM phase was dried over anhydrous Na2S04, filtered and concentrated under reduced pressure and chromatographed on silica gel using DCM and EtOAc (10:90) as eluents to get the desired amide 9 (108.7 mg, 32 % yield) as a white solid compound. -NMR (400 MHz, DMSO-de): <514.67 (br s, 1H), 9.28 (br s, 1H), 8.53 (br s, 1H), 7.48- 7.44 (m, 1H), 7.36-7.34 (m, 1H), 7.30 (br s, 1H), 7.24-7.22 (m, 1H), 4.50 (d, J= 6.4 Hz, 2H); 19F -NMR (376 MHz, DMSO-de): <5 -56.70 ppm. MH+ = 287.2 m/z. Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4928-87-4. Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; NATIONAL JEWISH HEALTH; WEMPE, Michael Fitzpatrick; VAZQUEZ-TORRES, Andres; DAI, Shaodong; (72 pag.)WO2020/41556; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 956317-36-5, 956317-36-5

Example 5: Preparation of Compound 5 (S)-(5-methyl-2-(2H-1,2,3-triazol-2-yl)phenyl)(5-(((5-(trifluoromethyl)pyridin-2-yl)amino)methyl)-6-azaspiro[2.5]octan-6-yl)methanone; [Show Image] 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid (1eq; prepared according to WO 2008147518), HOBT (1 eq) and EDCl.HCl (1.5eq) dissolved in dichloromethane (5ml/mmol) were stirred at 25C for 0.5-2hours, then intermediate 2 (1 eq) dissolved in dichloromethane was added. After 18 hours the mixture was poured in an aqueous saturated solution of NaHCO3 and extracted with dichloromethane. The crude was purified by silica gel column chromatography (DCM to DCM/MeOH = 9/1) to obtain the title compound with yield of 52%. 1 HNMR (CDCl3) delta ppm 8.22-8.38 (m, 1 H), 7.94-8.14 (m, 1 H), 7.79-7.86 (m, 1 H), 7.69 (m, 1 H), 7.50-7.62 (m, 1 H), 7.28-7.37(m, 1 H), 7.0-7.24(m, 1 H), 6.48-6.66 (m, 1 H), 5.20(m, 1 H), 4.34-4.84 (m, 1 H), 3.89-4.0 (m, 1 H),3.65-3.75 (m, 1 H), 3.21-3.44 (m, 2H), 3.01-3.11 (m, 1 H), 2.26-2.46 (m, 3H), 1.89-2.17 (m, 1 H), 1.02-1.28 (m, 1 H), 0.19-0.63(m, 4H) MS= ESI + m/z 439 [M+H]+

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ROTTAPHARM S.P.A.; EP2484674; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding some certain compound to certain chemical reactions, such as: 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 41253-21-8. 41253-21-8

A mixture of 2,3-difluorobenzylnitrile (2.27 g, 16.3 mmol) and triazole sodium salt (1.33 g, 14.8 mmol) in tetrahydrofaran (5 mL) and dimethylformamide (10 mL) was stirred at 85 C. for 4 h. After concentration, the residue was purified by flash chromatography (SiO2) eluting with 25%-50% ethyl acetate/hexane. The isolated product was recrystallized from hot ethyl acetate/hexane to give the title compound as white needles (1.51 g, 54% yield). 1H-NMR (500 MHz, CDCl3) delta ppm: 8.50 (1H, d, J=2.4 Hz), 8.25 (1H, s), 7.69-7.67 (1H, m), 7.60-7.57 (2H, m). LCMS [M+H]+ calcd for C9H6N4F: 189.16; found: 189.14.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Sodium 1,2,4-triazol-1-ide.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/111984; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

107534-96-3, A common heterocyclic compound, 107534-96-3, name is 3-((1H-1,2,4-Triazol-1-yl)methyl)-1-(4-chlorophenyl)-4,4-dimethylpentan-3-ol, molecular formula is C16H22ClN3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A portion of cis-[PtCl2(DMSO)2] (0.53 g, 1.26 mmol) placed into a pear-shaped flask of 100 mL in volume was dissolved in chloroform (20 mL) under stirring on a water bath (40C). To the resulting solution, reagent L (0.89 g, 2.89 mmol) was added. The formed light-yellow transparent solution was boiled on a water bath for 19 h under reflux and magnetically stirring and then transferred into a 150-mL beaker and evaporated one-half. Complex I was precipitated from the solution cooled to room temperature with hexane. The mixture of the precipitate and the mother solution was cooled to 10C, the solution was then decanted, and hexane (100 mL) was added to the precipitate, thereupon the mixture was allowed to stand at -10C for 15 h. The precipitate was twice washed with hexane, reprecipitated with hexane from a chloroform solution, filtered out, washed with hexane, and dried in air. The yield was 62%.

The synthetic route of 107534-96-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Khisamutdinov; Anpilogova; Shitikova; Murinov, Yu. I.; Russian Journal of Inorganic Chemistry; vol. 61; 12; (2016); p. 1530 – 1537; Zh. Neorg. Khim.; vol. 61; 12; (2016); p. 1591 – 1598,8;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 423165-07-5 name is exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 423165-07-5

To a stirred solution of 1-benzyl 3-((3aR,5aR,5bR,7aR,9S,l laR,l lbR,13aS)-3a- isocyanato-l-isopropyl-5a,5b,8,8,l la-pentamethyl-2-oxo-3,3a,4,5,5a,5b,6,7,7a,8,9,10,l l,l la, 1 lb, 12,13, 13a-octadecahydro-2H-cyclopenta[a]chrysen-9-yl) (lR,3S)-2,2-dimethylcyclo butane- 1,3 -die arboxylate (Intermediate-2, 1.0 g, 1.40 mmol, 1.0 eq) in THF (15 ml) was added DIPEA (0.722 g, 5.6 mmol, 4.0 eq) and (lR,3S,5S)-3-(3-isopropyl-5-methyl-4H-l,2,4- triazol-4-yl)-8-azabicyclo[3.2.1]octane (0.655 g, 2.8 mmol, 2.0 eq). The reaction mixture was stirred at room temperature for about 16 hours. After completion of the reaction (monitored by TLC), the reaction mixture was diluted with water (50 ml) and extracted with EtOAc (3×50 ml). The combined organic extracts were dried over sodium sulfate, filtered and evaporated under reduced pressure. The residue was purified by silicagel column chromatography by using 5% methanol in DCM as an eluent to obtain the desired product (0.65 g, 49% yield) as a white solid. 1H NMR (300 MHz, DMSO-d6): delta ppm 7.36 (m, 5H), 6.49 (s, 1H), 5.12, 5.06 (ABq, 2H), 4.48-4.30 (m, 4H), 3.20-3.08 (m, 4H), 3.0-2.80 (m, 3H), 2.34 (s, 3H), 2.22-2.03 (m, 4H), 2.02-1.73 (m, 11H), 1.70-1.33 (m, 10H), 1.32-1.20 (m, 10H), 1.20-1.12 (m, 6H), 1.07-0.98 (m, 6H), 0.91 (s, 3H), 0.88-0.78 (m, 11H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane, and friends who are interested can also refer to it.

Reference:
Patent; HETERO RESEARCH FOUNDATION; BANDI, Parthasaradhi Reddy; KURA, Rathnakar Reddy; GAZULA LEVI, David Krupadanam; ADULLA, Panduranga Reddy; KASIREDDY, Bhaskar Reddy; (84 pag.)WO2017/64628; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

1533519-85-5, A common compound: 1533519-85-5, name is Methyl 2-((4-(4-cyclopropylnaphthalen-1-yl)-4H-1,2,4-triazol-3-yl)thio)acetate, belongs to Triazoles compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

The compound a1 (50 g, 147.3 mmol, 1.0 eq.) Was dissolved in 500 mL of acetone, stirred at 20 to 30 C, methyl bromoacetate (1473 mmol, 10 eq.) Was added and reacted for 12 hours. The reaction solution was concentrated to dryness , And the concentrate was recrystallized from ethyl acetate to obtain 56.4 g of the catalyst b1 in a yield of 77.8%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2-((4-(4-cyclopropylnaphthalen-1-yl)-4H-1,2,4-triazol-3-yl)thio)acetate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Beijing Xin To Lead Pharmaceutical Co., Ltd.; Wang Hui; Zhen Zhibin; Zhang Xiang; (10 pag.)CN106916115; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding some certain compound to certain chemical reactions, such as: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7170-01-6. 7170-01-6

A mixture of compound 5z (220 mg, 0.5 mmol), 3-methyl-1,2,4-triazole (830 mg, 10 mmol; 20 eq.; prepared by the method described in Coll. Czech. Chem. Comm. 1985, 49, 2492), copper powder (63.5 mg, 1 mmol; 2 eq.), potassium carbonate (138 mg, 1 mmol; 2 eq.) was flushed with anhydrous nitrogen and heated in a sealed tube at 160 C. for 11 h. Upon cooling, to the mixture was added MeOH, and the insoluble material was filtered. The filtrate was concentrated in vacuo and purified by C-18 reverse phase column (Prep. System eluting with gradient 0-70% MeOH-water containing 0.1% TFA) to obtain 24 mg (0.049 mmol, Y. 9.8%) of the title compound Example 317 as amorphous powder (TFA salt): MS m/e 488 (MH); 1H NMR (CD3OD) delta ppm 1.30, 1.35 (3H, 2d, J=7 Hz), 2.54 (3H, s, CH3), 3-4.5 (8H, m, CH2N), 4.04, 4.05 (3H, 2s, CH3O), 7.46, 7.47 (5H, 2s, Ar-Hs), 7.85, 7.86 (1H, 2s), 8.28, 8.31 (1H, 2s), 9.22 (1H, s).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3-Methyl-1H-1,2,4-triazole.

Reference:
Patent; Wang, Tao; Zhang, Zhongxing; Meanwell, Nicholas A.; Kadow, John F.; Yin, Zhiwei; Xue, Qiufen May; Regueiro-Ren, Alicia; Matiskella, John D.; Ueda, Yasutsugu; US2004/110785; (2004); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

41253-21-8, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, A new synthetic method of this compound is introduced below.

To a solution of phenol 11a (200 mg, 0.441 mmol) and cesium carbonate (158 mg, 0.485 mmol) in DMF (10 mL) was added 1,2-dibromoethane (96 muL, 1.11 mmol). The resulting mixture was stirred at room temperature for 60 h. After dilution with water, the mixture was extracted with EtOAc. The organic layer was dried over anhydrous MgSO4, filtered and concentrated in vacuo. The residue was carried on to the next step without further purification.To a solution of the crude bromide in DMF (10 mL) was added 1,2,4-triazole sodium derivative (122 mg, 1.34 mmol). The mixture was stirred at room temperature for 15 h. After dilution with water, the mixture was extracted with EtOAc. The organic layer was dried over anhydrous MgSO4, filtered and concentrated in vacuo. The residue was purified using RP preparative HPLC to provide the titled compound 11g (78 mg, 33%, 2 steps). 1H NMR (400 MHz, DMSO-d6) delta 8.59 (s, 1H), 8.02 (s, 1H), 7.95 (s, 1H), 7.77-7.71 (m, 1H), 7.47 (s, 1H), 7.13 (s, 1H), 6.78 (d, J = 3.2 Hz, 1H), 6.62-6.58 (m, 1H), 5.02-4.92 (m, 2H), 4.71-4.35 (m, 8H), 3.71-3.61 (m, 1H), 3.49-3.41 (m, 1H), 3.38-3.15 (m, 5H); MH+ 549.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Lee, Suk Ho; Kim, Min Ju; Lee, Sung-Han; Kim, Jeongmin; Park, Hyun-Ju; Lee, Jinhwa; European Journal of Medicinal Chemistry; vol. 46; 7; (2011); p. 2662 – 2675;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 288-36-8, name is 1H-1,2,3-Triazole, This compound has unique chemical properties. The synthetic route is as follows., 288-36-8

1,2,3-triazole (3.45 g, 50 mmol), 2-iodo-5-methylbenzoic acid (5.24 g, 20 mmol), cesium carbonate (0.57 g, 3.6 mmol), cuprous iodide (0.38 g, 2 mmol), trans-N, N’-dimethyl-1,2-cyclohexanediamine (0.51 g, 3.6 mmol), N, N-dimethylformamide (30 mL)was added sequentially to a 100 mL single-necked round bottom flask and gradually heated under nitrogen to 100 C for 4 hours. The reaction was quenched, cooled, diluted with tap water and washed with ethyl acetate (200 mL x 2). The aqueous layer was acidified with concentrated hydrochloric acid (pH = 1~2) and extracted with ethyl acetate (200 mL x 2). The organic layers were combined and dried over anhydrous sodium sulfate. The filtrate was evaporated under reduced pressure and purified by column chromatography (dichloromethane / methanol (v/v) = 50/1) to give the title compound (yellow solid, 2.76 g, 68%).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Dongguan Dongyangguang Pharmaceutical Research And Development Co., Ltd.; Jin Chuanfei; Du Changfeng; Zhang Yingjun; Liu Yanping; Kou Yuhui; (38 pag.)CN106986859; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, This compound has unique chemical properties. The synthetic route is as follows., 4928-87-4

The intermediate 27a was added(0.2 g, 0.39 mmol) was dissolved in 35 ml of DMF, EDCI (0.08 g, 0.42 mmol) was added,HOBT, (0.058, 0.38 mmol) was dissolved with stirring, and then ml, 2,4-triazole-3-carboxylic acid (0.058,0.44mmo 1), DIEA 0.2ml (1.17mmo 1), stirring at room temperature for 12h, TLC detection, the end of the reaction, the liquid spin dry crude, crudeThe product was purified by silica gel G column chromatography [eluent (methanol: dichloromethane) = 50: 500 (nu: nu)] to give the title compound0 ¡¤ 08g, yield 33.3%

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Beijing Foreland Pharma Co., Ltd; Zhang, Xingmin; Wang, Ensi; Niu, Shengxiu; Guo, Jing; Dai, Zhuolin; Zheng, Nan; Ji, Qi; Li, Qinyan; Liang, Tie; (109 pag.)CN104411706; (2016); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics