Day: December 23, 2020

Reference of 16681-70-2,Some common heterocyclic compound, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(25,,^5)-4-Amino-5-(5′-chloro-2′-fluorobiphenyl-4-yl)-2-cyanomethylpentanoic acid ethyl ester (55 mg, 141 muiotaetaomicron) was combined with 3H-[l,2,3]triazole-4-carboxylic acid (19.2 mg, 170 muiotaetaomicron), HATU (64.5 mg, 170 muiotaetaomicron) and DIPEA (79 mu, 453 muiotaetaomicron) in DMF (2 mL) and was stirred at room temperature for 30 minutes then concentrated in vacuo and the crude residue was purified by normal phase chromatography (0-100% EtOAc/hexanes) to yield Compound 1 55 mg).

The synthetic route of 16681-70-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; FLEURY, Melissa; BEAUSOLIEL, Anne-Marie; HUGHES, Adam D.; LONG, Daniel D.; WILTON, Donna A.A.; WO2015/116786; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 815588-93-3, name is 1-Methyl-1H-1,2,4-triazole-5-carboxylic acid, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 815588-93-3, HPLC of Formula: C4H5N3O2

[00178] To a stirring solution of Int-C (93 mg, 0.73 mmol) in DCM (20 mL) were added N, N-diisopropylethylamine (0.4 mL, 2.21 mmol), compound 7 (320 mg, 0.73 mmol), followed by EDCI.HC1 (211 mg, 1.10 mmol), HOBt (170 mg, 1.10 mmol) at 0 ¡ãC and stirred at RT for 16 h. After consumption of the starting material (by TLC), the reaction mixture was evaporated under reduced pressure and the obtained crude was purified by column chromatography by eluting 4percent MeOH/DCM to afford 8 (210 mg, crude) as yellow thick syrup. This compound was used directly for next step without any purification. LCMS m/z: 543.5 [M++l]

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; NAUREX, INC.; LOWE, John, A.; KHAN, M., Amin; WO2014/120800; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 81606-79-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 81606-79-3, name is 2-(1,2,4-Triazol-1-yl)acetonitrile belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

Step 1To a 50 ml three necked round bottom flask, 4-(7-pivaloyl-5-((2-(trimethylsilyl)ethoxy)- methyl)-5H-pyrrolo[2,3-b]pyrazine-2-ylamino)benzaldehyde (O.lg, 0.22 mmole) and 2-(lH- l,2,4-triazol-l-yl)acetonitrile(0.0716g, 0.66 mmole) was taken in ethanol (5 mL). To this reaction mixture, piperidine (0.2 mL) was added drop wise at RT. After completion of the addition, the reaction mass was refluxed for 16 hrs and the completion of the reaction was monitored on TLC using ethyl acetate: hexane (5:5) as a mobile phase. After completion of the reaction, ethanol was distilled out and water was added to residue. Aqeous was extracted with ethyl acetate, organic layers were combined, dried over Na2S04, filtered and concentrated to afford crude product. The crude compound was purified using column purification by eluting the compound with 40% ethyl acetate in hexanes triturated with n-pentane, pentane layer was decanted and solid was dried under vacuum to yield 0.052 g of 3-(4-(7-pivaloyl-5-((2- (trimethylsilyl)ethoxy)methyl)-5H-pyrrolo[2,3-b]pyrazin-2-ylamino)phenyl)-2-(lH-l,2,4-triazol- 1 -yl)acrylonitrile.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(1,2,4-Triazol-1-yl)acetonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; PRINCIPIA BIOPHARMA INC.; GOLDSTEIN, David Michael; BRAMELD, Kenneth Albert; VERNER, Erik; WO2012/158785; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 7170-01-6,Some common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of CuI (190mg, 1mmol), 4-methyl-1H-imidazole (1.64g, 20mmol), Cs2CO3(3.25g, 10mmol), 3-bromo-5-(trifluoromethyl)aniline (2.40g, 10 mmol), 1-(5,6,7,8-tetrahydroquinolin-8-yl)ethanone (350mg, 2mmol) and DMF (30mL) was added to a bottom, the bottom was evacuated and backfilled with argon (this procedure was repeated three times), then the mixture was heated to 130 C for 24 h under argon. After cooling to room temperature, the solvent was removed under vacuum and the residue was purified by column chromatography on silica gel to afford the crude product. The crude product was recrystallized as a white solid (1.7 g, 71%)

The synthetic route of 7170-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Wang, Deping; Zhang, Zhang; Lu, Xiaoyun; Feng, Yubing; Luo, Kun; Gan, Jirong; Yingxue, Liu; Wan, Junting; Li, Xiang; Zhang, Fengxiang; Tu, Zhengchao; Cai, Qian; Ren, Xiaomei; Ding, Ke; Bioorganic and Medicinal Chemistry Letters; vol. 21; 7; (2011); p. 1965 – 1968;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1001401-62-2, Product Details of 1001401-62-2

A solution of 2-(2H-1,2,3-triazol-2-yl)benzoic acid (500 mg, 2.64 mmol) in SOCl2 (5 mL) was heated to reflux for 1 h, cooled to RT and concentrated in vacuo. The residue was dissolved in toluene (5 mL) and added to a solution of ((3R,6R)-6-methylpiperidin-3-yl)methanol hydrochloride (437 mg,2.65 mmol) in toluene (5 mL), followed by addition of aq. NaOH (5.3 mL, 1M, 5.3mmol). The resulting mixture was stirred at 10C for 12 h, poured into water (5mL) and extracted with EtOAc (5 mLx3). The combined organic layers were dried over Na2S04, filtered and concentrated in vacuo. The residue was purified by chromatography on silica (20-50 % EtOAc in petroleum ether) to afford the title compound as a solid. LRMS 25 m/z (M+H) 301.1 found, 301.2 required.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, and friends who are interested can also refer to it.

Reference:
Patent; MERCK SHARP & DOHME CORP.; LIVERTON, Nigel; KUDUK, Scott D.; BESHORE, Douglas; LUO, Yunfu; MENG, Na; YU, Tingting; (114 pag.)WO2016/65585; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

4922-98-9, name is 5-Phenyl-1H-1,2,4-triazol-3-amine, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 5-Phenyl-1H-1,2,4-triazol-3-amine

General procedure: A mixture of 0.001 mol of enaminone 1, 0.001 mol of the corresponding aminotriazole and 3 ml of dimethylformamide was refluxed for 2 h. The precipitate formed upon cooling of the reaction mixture was filtered off and recrystallized from 3 ml isopropyl alcohol-dimethylformamide mixture (2:1 v/v).

The synthetic route of 4922-98-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Ilin, Ivan; Lipets, Elena; Sulimov, Alexey; Kutov, Danil; Shikhaliev, Khidmet; Potapov, Andrey; Krysin, Michael; Zubkov, Fedor; Sapronova, Lyudmila; Ataullakhanov, Fazoyl; Sulimov, Vladimir; Journal of Molecular Graphics and Modelling; vol. 89; (2019); p. 215 – 224;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, This compound has unique chemical properties. The synthetic route is as follows., Product Details of 4928-87-4

To a reaction of 1/7-1, 2, 4-triazole-3 -carboxylic acid (226 mg, 2.0 mmol) and 2- phenylethanamine (0.27 mL, 2.1 mmol) in dry DMF (10 mL) was added 1- hydroxybenzotriazole monohydrate (337 mg, 2.2 mmol) and EDC (N-(3- Dimethylaminopropyl)-N’-ethylcarbodiimide) (422 mg, 2.2 mmol) followed by N- methylmorpholine (0.88 mL, 8.0 mmol via syringe). The mixture was stirred at room temperature under nitrogen and the solids were gradually dissolved. The contents were stirred at room temperature for 24.0 h, and then slowly diluted into iced water and extracted with DCM (2 x 50 mL). The DCM phase was washed with ice cold water (2 x 100 mL). The DCM phase was dried over anhydrous Na2S04, filtered and concentrated under reduced pressure and chromatographed on silica gel using MeOH and DCM (5:95) as eluents to get the desired amide 20 (189.4 mg, 44 % yield) as a white solid compound. -NMR (400 MHz, DMSO-de): <514.63-14.52 (m, 1H), 8.65-8.25 (m, 2H), 7.33-7.17 (m, 5H), 3.55-3.44 (m, 2H), 2.85 (t, J= 7.6 Hz, 2H,) ppm. MH+ = 217.1 m/z. According to the analysis of related databases, 4928-87-4, the application of this compound in the production field has become more and more popular. Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; NATIONAL JEWISH HEALTH; WEMPE, Michael Fitzpatrick; VAZQUEZ-TORRES, Andres; DAI, Shaodong; (72 pag.)WO2020/41556; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 3641-13-2, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 3641-13-2 name is 5-Amino-4H-1,2,4-triazole-3-carboxylic acid, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: A mixture of benzil (0.01 mol), aldehydes (0.01 mol), 3-amino-1,2,4-triazole-5-carboxylic acid (0.01 mol), ammonium acetate (0.01 mol) and ceric ammonium nitrate (15 mol%) as a catalyst were refluxed in ethanol (15 mL) for about 3-4 h. The progress of the reaction was monitored by TLC. After completion of reaction, the mixture was cooled to room temperature. The solid formed was filtered and dried. The crude products were recrystallized by ethanol.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Amino-4H-1,2,4-triazole-3-carboxylic acid, and friends who are interested can also refer to it.

Reference:
Article; Nikalje, Anna Pratima G.; Ghodke, Mangesh S.; Kalam Khan, Firoz A.; Sangshetti, Jaiprakash N.; Chinese Chemical Letters; vol. 26; 1; (2015); p. 108 – 112;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 4922-98-9, The chemical industry reduces the impact on the environment during synthesis 4922-98-9, name is 5-Phenyl-1H-1,2,4-triazol-3-amine, I believe this compound will play a more active role in future production and life.

Example 1; Part A; To the solution of 3-phenyl-1H-1 ,2,4-triazol-5-amine (0.8 g, 5 mmol) in acetic acid (6 mL) was added ethyl 4-chloro-3-oxobutanoate (0.75 mL, 5.5 mmol). The reaction mixture was stirred for 24 hours at 80 0C, and then cooled to room temperature. The reaction mixture was filtered. The precipitates were washed with ACN and dried to give compound 1-1 in a white powder (872 mg, 67percent yield). 1H NMR (400 MHz, CD3OD) delta 8.24-8.18 (m, 2H), 7.54-7.46 (m, 3H), 6.21 (s, 1H), 4.65 (s, 2H).; Example 6; Part A; To the solution of 3-phenyl-1 H-1 ,2,4-triazol-5-amine (0.8 g, 5 mmol) in acetic acid (6 ml_) was added ethyl 4-chloro-3-oxobutanoate (0.75 ml_, 5.5 mmol).The reaction mixture was stirred for 24 hours at 80 0C, and then cooled to room temperature. The reaction mixture was filtered. The precipitates were washed with ACN and dried to give compound 1-1 in a white powder (872 mg,67percent yield). 1H NMR (400 MHz, CD3OD) delta 8.24-8.18 (m, 2H), 7.54-7.46 (m,3H), 6.21 (s, 1 H), 4.65 (s, 2H).; Example 12; Part A; To the solution of 3-phenyl-1 H-1 ,2,4-triazol-5-amine (0.8 g, 5 mmol) in acetic acid (6 mL) was added ethyl 4-chloro-3-oxobutanoate (0.75 mL, 5.5 mmol). The reaction mixture was stirred for 24 hours at 80 0C, and then cooled to room temperature. The reaction mixture was filtered. The precipitates were washed with ACN and dried to give compound 1-1 in a white powder (872 mg, 67percent yield). 1H NMR (400 MHz, CD3OD) delta 8.24-8.18 (m, 2H), 7.54-7.46 (m, 3H), 6.21 (s, 1 H), 4.65 (s, 2H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Phenyl-1H-1,2,4-triazol-3-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SCHERING CORPORATION; SHIPPS, JR., Gerald, W.; CHENG, Cliff, C.; HUANG, Xiaohua; ACHAB, Abdelghani, Abe; ORTH, Peter; VOIGT, Johannes, H.; SOUCY, Kyle, Ann; WO2010/56631; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 74733-90-7, name is 2-(4-Bromophenyl)-2H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C8H6BrN3

Step A) 2-[4-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]-2H-1,2,3-triazolePd(dppf)Cl2 (280 mg, 0.343 mmol) was added to a mixture of 2-(4-bromophenyl)-2H-1,2,3-triazole (255 mg, 1.14 mmol), 4,4,4′,4′,5,5,5′,5′-octamethyl-2,2′-bi-1,3,2-dioxaborolane (350 mg, 1.38 mmol), and potassium acetate (340 mg, 3.46 mmol) in 1,4-dioxane (10 mL). The reaction was heated to 80 C. and stirred at this temperature overnight. The reaction was allowed to cool to rt and was diluted with EtOAc (30 mL) and brine (30 mL). The mixture was filtered through celite, and the organic layer was separated from the filtrate. The aqueous layer was extracted with EtOAc (2¡Á30 mL) and the organics were combined, dried (MgSO4), filtered and concentrated. The crude material was purified via flash chromatography using an Analogix SF15-12 g column and an eluent of EtOAc in n-heptane (0-10%) to afford the title compound as an orange solid (240.6 mg, 78.0%). MS (LCMS) m/z 272.4 (M+1). 1H NMR (400 MHz, CHLOROFORM-d) delta ppm 1.37 (s, 12H) 7.83 (s, 2H) 7.94 (d, 2H) 8.10 (d, J=8.59 Hz, 2H).

The synthetic route of 2-(4-Bromophenyl)-2H-1,2,3-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Pfizer Inc; US2012/232083; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics