Day: February 7, 2021

Related Products of 64922-04-9, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 64922-04-9 name is Ethyl 1H-1,2,4-triazole-5-carboxylate, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Preparation of Intermediate 1: 4-(3-Methanesulfonyloxymethyl-[l,2,4]triazol-l- yl)-piperidine-l-carboxylic acid tert-butyl esterStep 1: 4-(3-Methoxycarbonyl-[l,2,4]triazol-l-yl)-piperidine-l-carboxylic acid tert-butyl ester; To a solution of IH-[1, 2,4]triazole-3-carboxylic acid ethyl ester (1.05 g, 8.23 mmol) in dimethylformamide (50 rnL) was added sodium hydride (60%, 0.395 g, 9.88 mmol). The solution was stirred at room temperature for 20 minutes followed by 1 hour at 70 0C. 4-methanesulfonyloxy-piperidine-l-carboxylic acid tert-butyl ester (2.3 g, 8.23 mmol) was then added in a single portion and heated at 70 0C for 40 hours. The solution was cooled to 0 0C and the salt precipitate was removed by filtration. The filtrate was diluted with dichloromethane and washed with water, brine, dried over sodium sulfate, filtered and concentrated in vacuo. The residue was purified by flash chromatograph on silica gel with Hexanes and EtOAc to afford the desired product. 1H NMR (CDCl3): 5 8.18 (IH, s), 4.40 (IH, m), 4.22 (2H, m), 3.96 (3H, s), 2.82 (2H, m), 2.12 (2H, m), 1.94 (2H, m), 1.41 (9H, s).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Ethyl 1H-1,2,4-triazole-5-carboxylate, and friends who are interested can also refer to it.

Reference:
Patent; METABOLEX, INC.; WO2009/14910; (2009); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, A new synthetic method of this compound is introduced below., name: 2-(2H-1,2,3-Triazol-2-yl)benzoic acid

Step C: (¡À)-trans-(2-(2H-1,2,3-triazol-2-yl)phenyl)(3-((5-bromopyridin-2-yl)amino)-2-methylpiperidin-1-yl)methanone. The title compound from Step B (50 mg), DIPEA (1 mL), intermediate A-4 (100 mg) and HATU (200 mg) were stirred in THF at rt for 3 h. Upon completion of the reaction, purification was performed using preparative HPLC to give the title compound (20 mg, 55% yield). MS (ESI) mass calcd. for C20H21BrN6O, 440.2; m/z found 441.1 [M+H]+. 1H NMR (CDCl3): 8.11-7.26 (m, 8H), 7.11-5.91 (m, 1H), 5.19-4.55 (m, 1H), 4.26-2.68 (m, 3H), 2.11-0.71 (m, 7H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; Dvorak, Curt A.; Shireman, Brock T.; US2014/275095; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 49607-51-4, name is 1-Methyl-1H-1,2,4-triazol-3-amine, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C3H6N4

3,4-Dimethylfuran-2,5-dione (550 mg, 4.36 mmol, 1.05 equiv) and 1-methyl-1H-1,2,4-triazole-3-amine (407 mg, 4.15 mmol, 1.00 equiv) were dissolved in concentrated acetic acid (15 ml) and stirred under reflux conditions for 7 h. After cooling to room temperature, water and ethyl acetate were added and the mixture was extracted. The aqueous phase was repeatedly re-extracted vigorously with ethyl acetate, and the combined organic phases were then dried over magnesium sulfate, filtered and concentrated. Final purification by column chromatography of the resulting crude product (gradient ethyl acetate/heptane) gave 3,4-dimethyl 1-(1-methyl-1H-1,2,4-triazol-3-yl)-1H-pyrrole-2,5-dione in the form of a colorless solid (90 mg, 10% of theory). 1H-NMR (400 MHz, d6-DMSO delta, ppm) 8.09 (s, 1H), 3.75 (s, 3H), 2.01 (s, 6H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 49607-51-4.

Reference:
Patent; Bayer CropScience Aktiengesellschaft; Bayer Aktiengesellschaft; FRACKENPOHL, Jens; HELMKE, Hendrik; FRANKE, Jana; REINGRUBER, Anna Maria; MACHETTIRA, Anu Bheemaiah; GATZWEILER, Elmar; ROSINGER, Christopher Hugh; SCHMUTZLER, Dirk; DIETRICH, Hansjoerg; LUEMMEN, Peter; (96 pag.)US2019/330192; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 7343-34-2, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 7343-34-2 name is 3,5-Dimethyl-4H-1,2,4-triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

5-cWoro-3-(3,5-dimethyl-lH-l,2,4-triazol-l-yl)pyridazine (23-2): To a stirring solution of 3,5-dichloropyridazine (23-1, 5.00 g , 33.5 mmol, 1.0 eq.) in tetrahydrofuran (125 ml) at 0 ¡ãC was added cesium carbonate (17.7 g, 50.3 mmol, 1.5 eq.), followed by 3,5-dimethyl-lH-l,2,4~triazole (3.25 g, 33.5 mmol, 1.0 eq.) in tetrahydrofuran (125 mL) dropwise. The resulting reaction mixture was stirred for 1 hour at the same temperature and then warmed to room temperature and stirred for another 3 hours, then heated to 60 ¡ãC and stirred for 6 hours. The solvent was removed under reduced pressure and the residue was diluted with water (200 mL) and extracted with DCM (3 chi 80 mL). The combined organic layers were dried over Na2S04, filtered and concentrated. The residue was purified by silica gel column chromatography (70percent ethyl acetate in hexanes) to afford 5-chloro-3-(3,5-dimethyl-lH-l,2,4-triazol-l-yl)pyridazine (23-2) as a white solid. 1H NMR (300 MHz, CDC13) delta 9.11 (d, 1H, J= 2.1 Hz), 8.20 (d, 1H, J= 2.1 Hz), 2.96 (s, 3H), 2.43 (s, 3H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3,5-Dimethyl-4H-1,2,4-triazole, and friends who are interested can also refer to it.

Reference:
Patent; MERCK SHARP & DOHME CORP.; COX, Christopher, D.; DUDKIN, Vadim, Y.; KIM, June, J.; KUDUK, Scott, D.; MCVEAN, Carol; REGER, Thomas; STEEN, Justin; STEELE, Thomas; WO2013/52526; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 7411-23-6, A common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Sodium hydrogen (423.17 mg) was added to a N,N-dimethylformamide solution (10 ml) of a compoundWX123-1 (2.0 g) at 0C, and the reaction was stirred for 0.5 hour at 0C. Isopropane iodide (1.57 g) was added to thereaction solution and the reaction was stirred at 25 C for 14 hours. After the reaction was completed, water (10 ml) wasadded to quench the reaction, and then water (20 ml) was added, and the solution was extracted with ethyl acetate (20ml) for three times. The mixed organic phase was washed with water (20 ml) twice, dried with anhydrous sodium sulfate,and then filtered and concentrated to obtain a crude product WX123-2. 1H NMR (400MHz, CHLOROFORM-d) delta = 3.88- 3.75 (m, 3H).

The synthetic route of 7411-23-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Shandong Danhong Pharmaceutical Co., Ltd.; LUO, Zhi; LI, Xiaolin; YANG, Yaxun; YANG, Lele; LI, Peng; HE, Haiying; LI, Jian; CHEN, Shuhui; (155 pag.)EP3626699; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 41253-21-8,Some common heterocyclic compound, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 2-Chloro-N-(6-alkoxybenzo[d]thiazol-2-yl)acetamide (5 mmol) and sodium 1,2,4-triazole (6 mmol)were dissolved in N,N-dimethylformamide (10 mL) and stirred for 10 h at room temperature. Half of thesolvent was then evaporated, the solution was poured in 50 mL water, and extracted with ethyl acetate(30 mL 3). The ethyl acetate layer was dried over anhydrous MgSO4. After removing the solventunder reduced pressure, the crude product was obtained and recrystallized from dichloromethane toyield a white solid. N-(6-((3-Fluorobenzyl)oxy)benzo[d]thiazol-2-yl)-2-(1H-1,2,4-triazol-1-yl)acetamide (7a). White solid in55.1%. mp: 212-213 C. 1H-NMR (300 MHz, DMSO) delta12.73 (s, 1H, -CO-NH-), 8.59 (s, 1H, triazole-H),8.03 (s, 1H, triazole-H), 7.77-7.64 (m, 2H, Ar-H), 7.52-7.40 (m, 1H, Ar-H), 7.37-7.27 (m, 2H, Ar-H),7.23-7.10 (m, 2H, Ar-H), 5.33 (s, 2H, triazole -CH2-), 5.18 (s, 2H, -OCH2-). 13C-NMR (75 MHz, DMSO) delta166.31, 162.67 (d, J = 243.8 Hz), 156.09, 155.57, 152.04, 146.23, 142.99, 140.38 (d, J = 7.5 Hz), 133.21,130.94 (d, J = 8.4 Hz), 124.07 (d, J = 2.6 Hz), 121.88, 116.15, 115.08 (d, J = 21.0 Hz), 114.77 (d, J = 21.8 Hz),106.59, 69.42, 51.57. IR (KBr) cm1: 1605.72, 1556.78 (C=N). Tof-MS: m/z [M + H]+ 383.65.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Sodium 1,2,4-triazol-1-ide, its application will become more common.

Reference:
Article; Liu, Da-Chuan; Zhang, Hong-Jian; Jin, Chun-Mei; Quan, Zhe-Shan; Molecules; vol. 21; 3; (2016);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 135242-93-2, name is (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 135242-93-2, Product Details of 135242-93-2

A mixture of carbonyldiimidazole (CDI, 4.62 g, 28.5 mmol), ( 1 -methyl- 1,2, 4-triazol- 3-yl)methanol (3.45g, 30.53 mmol), and 2-MeTHF (50 mL) was stirred at room temperature (20 C) for 3 hours. To the mixture was added methyl (5)-l-amino-7-fluoro-2,3-dihydro-lH- indene-4-carboxylate hydrochloride [lOa.HCl] (5.0 g, 20.35 mmol) followed by N,N- diisopropylethylamine (6.58 g, 50.9 mmol). The contents were heated to 60 C and stirred for 15 hours. The mixture was cooled to 20 C, charged with water (50 mL), and stirred for 30 min. The slurry was filtered, washed with 2-MeTHF (2 x 5 mL) and dried under vacuum to give methyl fV)-7-riuoro- 1 -(((( 1 -methyl- 1 H- 1.2.4-triazol-3-yl)methoy)carbonyl)amino)- 2,3-dihydro-lH-indene-4-carboxylate [11a] as white crystalline solid (5.8g, 81.8% yield). ‘H NMR (400 MHz, DMSO-d6) d 8.41 (s, 1H), 7.87 (dd, J = 8.6, 5.0 Hz, 1H), 7.78 (d, J = 8.7 Hz, 1H), 7.11 (t, J = 8.8 Hz, 1H), 5.28-5.22 (m, 1H), 4.98 (q, J = 10 Hz, 2H), 3.82 (s, 3H), 3.80 (s, 3H), 3.31 (ddd, J = 17.6, 8.8, 5.5 Hz, 1H), 3.06 (ddd, J = 17.6, 8.7, 6.3 Hz, 1H), 2.44- 2.35 (m, 1H), 1.94-1.81 (m, 1H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ARBUTUS BIOPHARMA CORPORATION; COLE, Andrew G.; KULTGEN, Steven; PAMULAPATI, Ganapati Reddy; SPINK, Jan Michelle; (76 pag.)WO2019/200114; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 3641-08-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3641-08-5, name is 2H-1,2,4-Triazole-3-carboxamide belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

In a 500 ml jacketed flask equipped with a mechanical stirrer, a temp probe, a circulation bath and a positive nitrogen atmosphere set up was placed with 1,2,4-triazole-3-carboxamide 25.3 gm (0.112 mole), 1,4-dioxane 225 gm, and pyridine 72.8 gm (0.92 mole). The mixture was chilled to -6.8 C. Trifluoroacetic anhydride 107.1 gm (0.51 mole) was added dropwise at -1.3 to -6.8 C. in 10 min. Then the mixture was warmed to ambient temperature and stirred for 30 min. Without work up, a sample was taken for HPLC analysis. The chromatogram showed that the product contained 93% 3-CNT and 0.2% 3-CAT.

The synthetic route of 2H-1,2,4-Triazole-3-carboxamide has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Ampac Fine Chemicals LLC; US2009/292122; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7170-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of compound 10 (500 mg, 1.03 mmol), 4-methylpyridin-2-ol (168 mg, 1.54 mmol) and K2CO3(283 mg, 2.05 mmol) in DMF (5 mL) was stirred at 80 oC for 10 hoursand then concentrated in vacuo to remove DMF. The residue was diluted withwater and extracted with EtOAc. The organic layer was washed with brine, driedover Na2SO4, filtered and concentrated in vacuo. Theresidue was purified by column chromatography (PE : EtOAc = 1 : 1) to give theproduct of 1r (400 mg, yield: 83%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Article; He, Shuwen; Li, Peng; Dai, Xing; McComas, Casey C.; Du, Chunyan; Wang, Ping; Lai, Zhong; Liu, Hong; Yin, Jingjun; Bulger, Paul G.; Dang, Qun; Xiao, Dong; Zorn, Nicolas; Peng, Xuanjia; Nargund, Ravi P.; Palani, Anandan; Tetrahedron Letters; vol. 55; 14; (2014); p. 2212 – 2216;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 3641-13-2, name is 5-Amino-4H-1,2,4-triazole-3-carboxylic acid, molecular formula is C3H4N4O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 5-Amino-4H-1,2,4-triazole-3-carboxylic acid

General procedure: A mixture of benzil (0.01 mol), aldehydes (0.01 mol), 3-amino-1,2,4-triazole-5-carboxylic acid (0.01 mol), ammonium acetate (0.01 mol) and ceric ammonium nitrate (15 mol%) as a catalyst were refluxed in ethanol (15 mL) for about 3-4 h. The progress of the reaction was monitored by TLC. After completion of reaction, the mixture was cooled to room temperature. The solid formed was filtered and dried. The crude products were recrystallized by ethanol.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3641-13-2, its application will become more common.

Reference:
Article; Nikalje, Anna Pratima G.; Ghodke, Mangesh S.; Kalam Khan, Firoz A.; Sangshetti, Jaiprakash N.; Chinese Chemical Letters; vol. 26; 1; (2015); p. 108 – 112;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics