Day: February 25, 2021

Related Products of 7343-33-1, These common heterocyclic compound, 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 59. Preparation of 3-bromo-l-(4-(trifluoromethoxy)phenyl)-lH-l,2,4-triazole (B61) To a 250 mL reaction flask was added 3-bromo-lH-l,2,4-triazole (5 g, 33.8 mmol), copper(I) iodide (0.644 g, 3.38 mmol) and cesium carbonate (11.01 g, 33.8 mmol). The flask was evacuated/backfilled with N2, then DMSO (33.8 ml) and l-iodo-4-(trifluoromethoxy)benzene (4.87 g, 16.90 mmol) were added. The reaction mixture was heated to 100 ¡ãC for 20 h. The reaction was cooled to room temperature, diluted with EtOAc and filtered through a plug of Celite. The Celite was further washed with EtOAc. Water was added to the combined organics, and the layers were separated. The aqueous phase was neutralized to pH 7, and further extracted with EtOAc. The combined organics were concentrated in vacuo. Purification via flash chromatography (silica/EtO Ac/Hex) yielded 3-bromo-l-(4- (trifluoromethoxy)phenyl)-lH-l,2,4-triazole as an off white solid (3.78 g, 12.27 mmol, 72.6percent): mp 69-70 ¡ãC; ]H NMR (400 MHz, CDC13) delta 8.44 (s, 1H), 7.70 (d, / = 8.9 Hz, 2H), 7.38 (d, J = 8.5 Hz, 2H); 19F NMR (376 MHz, CDC13) delta -58.04; EIMS m/z 307.

The synthetic route of 7343-33-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DOW AGROSCIENCES LLC; CROUSE, Gary D.; DEMETER, David A.; SPARKS, Thomas C.; WANG, Nick X.; DENT, William Hunter; DEAMICIS, Carl; NIYAZ, Noormohamed M.; BAUM, Erich W.; FISCHER, Lindsey G.; GIAMPIETRO, Natalie C.; FRITZ, Amanda E.; WO2014/11429; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-88-0, name is 1H-1,2,4-Triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Quality Control of 1H-1,2,4-Triazole

, adding 50 mmol of sodium methoxide into 50 mmol of 1, 2, 4-triazole (shown in the formula II)) and 50 mL of methanol solution, stirring for 60 minutes at 40 DEG c, and dropwise adding 60 mmol of bromobenzene, carrying out condensation reflux for 16 hours at the temperature of 90 DEG c, removing volatile matters in the reaction raffinate, washing the carbon tetrachloride, and filtering the solid impurities, and carrying out rotary evaporation to remove the washing solvent to obtain colorless liquid 1-phenyl -1,2,4-triazole 6.32g

The synthetic route of 288-88-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Nanjing Tech University; Guan Guofeng; He Yuting; Ding Jing; Li Xue; Wan Hui; (9 pag.)CN108484654; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 1157938-97-0, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1157938-97-0 as follows.

The thus obtained LDA-solution (3.66 mL, 0.98 mmol, 1.1 eq) was transferred to a Schlenk vessel and ethylpropionate (100 mg, 0.98 mmol, 1.1 eq.) was added in a drop wise fashion at -78 C. under a nitrogen atmosphere. The resulting mixture was stirred at -78 C. for 30 minutes and then 1-(2,5-difluorophenyl)-2-(lII-1,2,4-triazol-1-yl)ethanone (200 mg, 0.90 mmol, 1.0 eq.) in THF (3.66 mL) was added in a drop wise fashion over 15 minutes. The reaction mixture was stirred for 2 hours at -78 C. and then quenched with acetic acid and warmed to room temperature. The mixture was diluted with aqueous saturated NH4Cl and ethylacetate. The aqueous layer was extracted with ethylacetate (2¡Á) and the combined organic layers were washed with brine, dried (Na2SO4), filtered and concentrated in vacuo to give a yellow oil containing the racemic ester I with a diastereomeric excess of 29% in favour of the desired RR/SS diastereomer. Further purification by column chromatography (n-heptane/EtOAc/MeOH 60/40/5 v/v/v) provided the RR/SS diastereomer (light yellow solid) as well as the RS/SR diastereomer (off-white solid) in a combined overall yield of 179 mg (0.55 mmol, 61%).

According to the analysis of related databases, 1157938-97-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Basilea Pharmaceutica AG; Van Summeren, Ruben; Vaessen, Harrie; Mink, Daniel; Waser, Mario; (11 pag.)US2019/77771; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

1455-77-2, name is 3,5-Diamino-1,2,4-triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of 3,5-Diamino-1,2,4-triazole

3′-methoxyacetophenone was used in place of 2-acetylthiophene in Reference Example 001 and heated to reflux in xylene in the presence of N,N-dimethylformamide diethyl acetal as in Reference Example 001, and 3-dimethylamino-1-(3-methoxyphenyl)propenone (quantitative) was obtained, which was subsequently reacted with 3,5-diamino-1,2,4-triazole in toluene in the presence of 10-camphor sulfonic acid and the title compound was obtained (yield 65percent).

The synthetic route of 1455-77-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NIPPON KAYAKU KABUSHIKI KAISHA; EP1674454; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 1001401-62-2

A solution of 2-(2H-1,2,3-triazol-2-yl)benzoic acid (P. Coleman, J. Schreier, WO2007/126934) (1 g, 4.1 mmol) in SOCl2 (10 mL) was stirred at 80 C for 30 min. The solvent was removed under reduced pressure and toluene (10 mL) was added to give solution A. The product from step 4 (1 g, 4.1 mmol) was dissolved in DCM (10 mL), DIEA (1.58 g, 12 mmol) added, and then solution A added at 0 C. The resulting mixture was stirred at RT for 2 h, then poured into water (10 mL) and extracted with DCM (10 mL x 3). The combined organic layers were washed with brine (10 mL), dried over Na2SO4, filtered and concentrated in vacuo. The residue was purified by chromatography on silica (petroleum ether : EtOAc = 10 : 1 to = 3 : 1) then purified by prep. TLC (petroleum ether : EtOAc = 1 : 1) to give the title compound (0.2 g). LRMS m/z (Mu+Eta) 416.0, 418.0 found, 416.1, 418.1 required.

The synthetic route of 1001401-62-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; LIVERTON, Nigel; BESHORE, Douglas, C.; KUDUK, Scott, D.; LUO, Yunfu; MENG, Na; YU, Tingting; WO2015/20930; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, A new synthetic method of this compound is introduced below., SDS of cas: 1001401-62-2

Intermediates 10: N-[(1S,2S)-2-Hydroxycyclopentyl]-2-(2H-1,2,3-triazol-2-yl)benzamide Triethylamine (1.52 ml, 10.90 mmol), 3H-[1,2,3]triazolo[4,5-b]pyridin-3-ol (0.59 g, 4.36 mmol) and EDC (0.84 g, 4.36 mmol) were added to a solution of (1R,2S)-2-aminocyclopentan-1-ol hydrochloride (CAS number 137254-03-6; 0.50 g, 3.63 mmol) and 2-(2H-1,2,3-triazol-2-yl)benzoic acid (CAS number 1001401-62-2; 0.76 g, 4.00 mmol) in DCM (10 ml). The reaction was stirred at room temperature for 18 hours and then diluted with DCM (50 ml) and washed with a saturated solution of sodium bicarbonate (2¡Á20 ml). The crude product was purified by column chromatography (silica, 0-100% ethyl acetate/petrol) to afford the title compound. 1H NMR (400 MHz, DMSO-d6) delta ppm 1.36-1.59 (m, 3H), 1.62-1.88 (m, 3H), 3.79-3.93 (m, 1H), 3.94-4.10 (m, 1H), 4.29-4.39 (m, 1H), 7.49-7.58 (m, 1H), 7.58-7.67 (m, 2H), 7.71-7.82 (m, 2H), 8.05 (s, 2H) MS ES+: 273 Intermediates 11: N-[(1S,2S)-2-Hydroxycyclopentyl]-2-(2H-1,2,3-triazol-2-yl)benzamide Prepared according to the procedure for N-[(1S,2S)-2-hydroxycyclopentyl]-2-(2H-1,2,3-triazol-2-yl)benzamide (Intermediate 10) from 2-(2H-1,2,3-triazol-2-yl)benzoic acid (CAS number 1001401-62-2; 531 mg, 2.81 mmol), (1S,2S)-2-aminocyclopentan-1-ol hydrochloride (CAS number 68327-04-8; 368 mg, 2.67 mmol) and DIPEA (1401 mul, 8.02 mmol) to afford the title compound. 1H NMR (400 MHz, DMSO-d6) delta ppm 1.33-1.48 (m, 2H), 1.49-1.79 (m, 3H), 1.83-1.97 (m, 1H), 3.80-3.88 (m, 1H), 3.89-3.98 (m, 1H), 4.57-4.67 (m, 1H), 7.43-7.55 (m, 2H), 7.56-7.67 (m, 1H), 7.73-7.83 (m, 1H), 8.03 (s, 2H), 8.09-8.23 (m, 1H) MS ES+: 273

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Takeda Pharmaceutical Company Limited; Fieldhouse, Charlotte; Glen, Angela; Maine, Stephanie; Fujimoto, Tatsuhiko; Robinson, John Stephen; US2015/232460; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 288-36-8, A common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

4,5-dibromo-2H-l,2,3-triazole. Bromine (15 mL) was added dropwise to a stirred solution of 2H-l,2,3-triazole (15.0 g, 217 mmol) in water (200 mL) at 0C. Once addition was completed, the mixture was stirred for 12 hours at room temperature. The resultant mixture was filtered off and washed with water, dried over sodium sulfate and recrystallized from methanol to afford 4,5-dibromo-2H-l,2,3-triazole as a dark brown solid (29.8 g, 60.8%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; CONSTELLATION PHARMACEUTICALS, INC.; ALBRECHT, Brian, K.; GEHLING, Victor, S.; HEWITT, Michael, C.; TAYLOR, Alexander, M.; HARMANGE, Jean-Christophe; WO2012/151512; (2012); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 138624-97-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 138624-97-2, name is 1-Benzyl-1H-1,2,4-triazole-3-carboxylic acid belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

A mixture of 1-benzyl-1,2,4-triazole-3-carboxylic acid (16 mg, 0.08 mmol), (6S)-6-amino-2,4-dimethyl-7,8-dihydro-6H-pyrazolo[4,3-b]azepin-5-one (15 mg, 0.08 mmol), 1-(3-dimethylaminopropyl)-3-ethylcarbodiimidehydrochloride (15 mg, 0.08 mmol) and 1-hydroxybenzotriazole (10 mg, 0.08 mmol) in N,N-dimethylformamide (5 mL) was stirred at 30 C. for 2 h. The mixture was concentrated under reduce pressure. The residue was purified by RP-HPLC (acetonitrile 22-50%/0.05% hydrochloride acid in water) to afford 1-benzyl-N-[(6S)-2,4-dimethyl-5-oxo-7,8-dihydro-6H-pyrazolo[4,3-b]azepin-6-yl]-1,2,4-triazole-3-carboxamide (16.3 mg, 56%) as a white solid. 1H NMR (400 MHz, CD3OD) delta 8.81 (s, 1H), 7.84 (s, 1H), 7.38-7.33 (m, 5H), 5.51 (s, 2H), 4.73-4.68 (m, 1H), 3.93 (s, 3H), 3.31 (s, 3H), 3.00-2.90 (m, 2H), 2.50-2.45 (m, 1H), 2.27-2.22 (m, 1H). LCMS RT=1.088 min, m/z=380.2 [M+H]+. LCMS (5 to 95% acetonitrile in water+0.03% trifluoroacetic acid over 1.5 mins) retention time 1.088 min, ESI+ found [M+H]=380.2.

The synthetic route of 1-Benzyl-1H-1,2,4-triazole-3-carboxylic acid has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Genentech, Inc.; Patel, Snahel; Hamilton, Gregory; (73 pag.)US2018/170927; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7170-01-6, SDS of cas: 7170-01-6

To a solution of l-chloro-2-(4-methoxybenzyloxy)-4-nitrobenzene (15 g, 51.1 mmol) in DMSO (45 mL) was added potassium hydroxide (4.3 g, 77 mmol) followed by methyl triazole (6.39 g, 77 mmol) at room temperature. The reaction mixture was heated at 95 C for 18 h. The reaction mixture was poured onto crushed ice (1.5 Kg) and extracted with ethyl acetate (3 x 250 mL). It was then washed with brine (3 x 250 mL) and dried over sodium sulphate. The solvent was removed under reduced pressure and the residue was dissolved in dichloromethane (25 mL) and absorbed onto silica (25 g). The resultant slurry of the compound on silica was subjected to flash chromatography using a Teledyne Isco instrument (120 g RediSep silica column, with 50% ethyl acetate in pet-ether) to get Intermediate J(2) (6 g, 34.5%) as a yellow solid and Intermediate J(3) (4.5 g, 24.9%) as a dark brown solid.Analytical data of J(2): LC-MS (M+H)+ = 341.2. IH NMR (400 MHz, CDC13) delta ppm 8.83 (IH, s), 8.13 (IH, d, J=8.8 Hz), 8.06 (IH, s), 8.09 (IH, d, J= 8.8 Hz), 7.35 (2H, d, J=8.4 Hz), 6.94 (2H, d, J= 6.4 Hz), 5.29 (2H, s), 3.83 (3H, s), 2.47 (3H, s).Analytical data of J(3): LC-MS (M+H)+ = 341.2. IH NMR (400 MHz, CDC13) delta ppm 8.03-7.96 (3H, m), 7.57 (IH, d, J= 8.8 Hz), 7.20 (2H, d, J=8.4 Hz), 6.89 (2H, d, J=8.8 Hz), 5.13 (2H, s), 3.80 (3H, s), 2.32 (3H, s).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; BOY, Kenneth M.; GUERNON, Jason M.; MACOR, John E.; THOMPSON III, Lorin A.; WU, Yong-Jin; ZHANG, Yunhui; WO2012/9309; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 151899-62-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 151899-62-6, name is 3-Iodo-1-trityl-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

3-iodo-1-trityl -1H-1,2,4- triazole (300 mg),3-cyanophenyl boronic acid (101 mg), tetrakis triphenylphosphine palladium (79 mg), ethanol 2M aqueous sodium carbonate (1.5 mL) (1.0 mL) – toluene (1.5 mL) mixed solution of the mixture was stirred for 4 hours at 100 C. After cooling to room temperature, and separated the two layers.The aqueous layer was extracted with ethyl acetate, it was concentrated under reduced pressure and the organic layers were washed with. The residue was purified by column chromatography (silica gel cartridge, hexane: ethyl acetate = 88: 12-50: 50) to give the title compound (227 mg) as a colorless solid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Iodo-1-trityl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; TAISHO PHARMACEUTICAL COMPANY LIMITED; KONISHI, KAZUHIDE; KANUMA, KOSUKE; NAKAMURA, TOSHIO; AMADA, HIDEAKI; YAMAMOTO, SHUJI; KASHIWA, SHUHEI; MASUDA, SEIJI; OKADA, KUMIKO; KAWAMOTO, HIROSHI; (74 pag.)JP2015/78127; (2015); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics