Day: March 2, 2021

Reference of 6523-49-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 6523-49-5 name is 4-(1,2,4-Triazol-1-yl)aniline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

N’ – [5 -(3 -Chloro-propoxy)-2-cyano-4-methyoxy-phenyl] -N,N-dimethyl- formamidine (WO03055491, 580 mgs)5 4-(l,2,4-triazolyl)aniline (314 mgs) and AcOH(4 mL) were heated to 90 for 1 hr before cooling. The oil was concentrated and the resultant slurry dissolved in MeOH, sonicated and the resultant white powder filtered and dried to produce the title compound (765 mg). 1H NMR delta 9.65 (s, IH), 9.25 (s, IH), 8.5 (s, IH), 8.23 (s, IH), 8.02 (d, 2H, J9Hz ), 7.89 (s, IH), 7.87 (d, 2H, J=9), 7.24 (s, IH), 4.28 (t, 2H, J=6), 3.95 (s, 3H), 3.83(t, 2H, J6Hz), 2.27 (q, 2H, J6Hz); LC-MS rt 2.13 m/z 411 ES+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-(1,2,4-Triazol-1-yl)aniline, and friends who are interested can also refer to it.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 1001401-62-2, These common heterocyclic compound, 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of 2-(2H-l,2,3-triazol-2-yl)benzoic acid (100 mg, 0.528 mmol) in SOCl2 (251.5 mg, 2.11 mmol) was stirred at RT for 0.5 h, then concentrated in vacuo. To a solution of the product from Step 3 (110 mg, 0.48 mmol) and Et3N (145.7 mg, 1.44 mmol) in DCM (1 mL) at 0 C was added a solution of the above residue in DCM (1 mL) dropwise. The resulting mixture was stirred at 0 C for 2 h, then quenched with water (1 mL) and extracted with DCM (2 mL x 3). The combined organic layers were washed with brine (2 mL), dried over Na2SC>4, filtered, and concentrated in vacuo. The residue was purified by prep-TLC (50% EtOAc in petroleum ether) to give the title compound as a oil. LRMS m/z (Mu+Eta) 400.0, 402.0 found, 400.1, 402.1 required.

Statistics shows that 2-(2H-1,2,3-Triazol-2-yl)benzoic acid is playing an increasingly important role. we look forward to future research findings about 1001401-62-2.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; LIVERTON, Nigel; LUO, Yunfu; (85 pag.)WO2016/100156; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, A new synthetic method of this compound is introduced below., category: Triazoles

(ii) Preparation of crude anastrozole; Into a 1 L, three-necked RB flask was charged 60g of sodium triazole monohydrate (prepared by reaction of molar quantities of 1,2,4-IH-triazole and sodium hydroxide in isopropanol at reflux temperature and isolated by filtering of the reaction mass at room temperature) and 200ml of dry DMF under nitrogen atmosphere. The reaction mass was cooled to 20 C. A solution of the above bromo compound of formula-V (140g) in toluene (200ml) was added to the reaction mass over a period of 2hr. The reaction mass was maintained at this temperature until the completion of reaction. The reaction mass was transferred into 3L flask containing 1.5L of water and stirred for 30min. Reaction mass was extracted with toluene (2 x 300ml and 1 x 100ml). Toluene layers were combined and washed with water (2 x 200ml). Toluene layer was treated with activated carbon (5g) and filtered. Toluene was distilled of from the filtrate under vaccum to get 130g of crude anastrozole.

The synthetic route of 41253-21-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NATCO PHARMA LIMITED; PULLA REDDY, Muddasani; VENKAIAH CHOWDARY, Nannapaneni; WO2005/105762; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 956317-36-5, The chemical industry reduces the impact on the environment during synthesis 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, I believe this compound will play a more active role in future production and life.

5-methyl-2- (2H-1,2,3-triazol-2-yl)Benzoic acid (2.03 g, 10 mmol)Was added to a 100 mL single-necked round bottom flask,Dried over anhydrous dichloromethane (20 mL)Sulfur chloride (15 mL, 200 mmol) was added slowly,And pyridine (0.15 mL, 2 mmol)The temperature was gradually raised to reflux for 3 hours.Stop the reaction,cool down,The solvent is slowly evaporated under reduced pressure,The resulting product was used directly in the next step.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Guangdong HEC Pharmaceutical Co., Ltd.; Jin, Chuanfei; Gao, Jinheng; Zhang, Yingjun; (39 pag.)CN106243052; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, A new synthetic method of this compound is introduced below., Computed Properties of C2H5N5

A solution of 3-(dimethylamino)-1-phenylpropan-1-one hydrochloride 9 (9.36 mmol) and diaminotriazole 10 (9.36 mmol) in 20 mL of acetic acid was heated to reflux for 6 h. The reaction mixture was cooled and the solvent evaporated in vacuo to furnish a mixture of desired product 12 (minor) and 5-phenyl-6,7-dihydro-[1,2,4]triazolo[1,5-a]pyrimidin-2-amine (major). The crude mixture was taken to the next step without any further purification and it was treated with N-bromosuccinimide (14.03 mmol) in ethanol (20 mL) under reflux for 5 h to promote the oxidation of the dihydrotriazolopyrimidine. The reaction mixture was cooled, and the solvent was evaporated in vacuo to yield a pale-yellow solid. The crude compound was purified by flash chromatography on silica gel using as eluent a gradient of EtOAc (0-50percent) to produce the desired compound 12 as white solid (adapted from 2). Yield: 29percent (0.57 g). 1H NMR (600 MHz, DMSO-d6) delta 9.07 (d, J = 6.9 Hz, 1H), 8.21 ? 8.19 (m, 2H), 7.72 (d, J = 6.9 Hz, 1H), 7.56 (s, 3H). HRMS-ESI (+) m/z calculated for C11H10N5, 212.0936 [M+H]+; found: 212.0941

The synthetic route of 1455-77-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Ribeiro, Carlos J.A.; Kankanala, Jayakanth; Xie, Jiashu; Williams, Jessica; Aihara, Hideki; Wang, Zhengqiang; Bioorganic and Medicinal Chemistry Letters; vol. 29; 2; (2019); p. 257 – 261;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1455-77-2, COA of Formula: C2H5N5

General procedure: An equimolar solution of 3,5-diamino-1,2,4-triazole (0.99?g, 0.01?mol) and 2-hydroxynaphthaldehyde (1.72?g, 0.01?mol) in dry methanol (50?mL) was refluxed for 3?h, a precipitated product was formed during refluxing. It was then cooled to room temperature, filtered, washed with methanol (35?mL), then with diethyl ether (2?¡Á?5?mL) and dried under vacuum. Recrystallization in a mixture of methanol:dioxane (1:4) gave TLC pure product (L1) in 83percent yield. The same method was applied for the preparation of all other ligands (L2)?(L5).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3,5-Diamino-1,2,4-triazole, and friends who are interested can also refer to it.

Reference:
Article; Sumrra, Sajjad H.; Chohan, Zahid H.; Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy; vol. 98; (2012); p. 53 – 61;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7411-23-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

To a stirred solution of 3,5-dibromo-1,2,4-triazole,2 (2.8 g, 12.34 mmol) in dichloromethane (40 mL) was added (4-(methoxycarbonyl)phenyl)boronic acid (2.0 g, 11.1 mmol), copper(II) acetate (4.0 g,22.0 mmol), pyridine (1.75 g, 22.1 mmol) and 4A molecular sieves sequentially. It was stirred for 14 h at 25C during which TLC showed the completion of the reaction. It was filtered through a celite bed and the filtrate was concentrated under reduced pressure to give crude product 3, which was further purified by column chromatography using silica gel (100-200 mesh) using ethyl acetate: hexane (30:70) as the eluent to afford 3 (2.70 g, 60%) as an off-white solid. m.p. 139.2-140.9C; IR (KBr): 2957, 1724, 1607,1510, 1447, 1391, 1311, 1295, 1266, 1118, 1003, 857,769 cm-1; 1H NMR (400 MHz, CDCl3): 3.97 (s, 3H),7.69 (d, 2H), 8.21 (d, 2H); 13C NMR (100 MHz,CDCl3): 52.7, 124.38, 129.2, 130.9, 130.9, 131.4,139.3, 141.9, 165.7; MS (EI): m/z Calcd for C10H7Br2N3O2: 361.89. Found: 361.90 (dibromo pattern).

The synthetic route of 3,5-Dibromo-1H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Article; Roy, Bhairab Nath; Singh, Girij Pal; George, Shaji K.; Lathi, Piyush S.; Agrawal, Manoj K.; Trivedi, Anurag; Mishra, Madhan; Singh, Gajendra; Indian Journal of Chemistry – Section B Organic and Medicinal Chemistry; vol. 53; 5; (2014); p. 610 – 618;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 4-(1,2,4-Triazol-1-yl)aniline

A mixture of the formamidine from step 1 (76 mg) and 4-triazolylaniline(24 mg) in AcOH (2 ml) was heated to 125 for 1 h. After cooling, the mixture was diluted and basified with IN NaOH (20 ml). The resulting ppt was isolated by filtration, washed with DCM then triturated with MeOH / acetone. The filtrate was concentrated to give the title compound (22 mg) as a light green solid. 1H NMR delta 10.45 (IH, br s), 9.3 (IH, s), 8.88 (IH, s), 8.6 (IH, s), 8.26 (IH, s),8.14 (3H, m), 7.87 (5H5 m), 7.12 (2H5 d, J 8.85Hz), 3.78 (4H, m), 3.21 (4H5 m) ; LC- MS rt 2.28 m/z 450 ES+.

The synthetic route of 6523-49-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4928-87-4, Quality Control of 1,2,4-Triazole-3-carboxylic acid

To isolate single crystals of [Mn(L)2(H2O)2] (1), 1H-1,2,4-triazole-3-carboxylic acid (0.117 g, 1 mmol), potassium hydroxide (0.04 g, 1 mmol) and manganese(II) chloride tetrahydrate (0.098 g, 0.5 mmol) were placed in the main arm of a branched tube to be heated. Water was carefully added to fill both arms, and then the arm to be heated was placed in a bath at 60 C. After 10 days, colorless crystals were deposited in the cooler arm which were filtered off, washed with water and air dried. (0.161 g, yield 51.3%), m.p. > 300 C.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1,2,4-Triazole-3-carboxylic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Safarifard, Vahid; Morsali, Ali; Ultrasonics Sonochemistry; vol. 21; 1; (2014); p. 253 – 261;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 16681-65-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

To a flask containing 1-methyl-1H-1,2,3-triazole (275 mg, 3.31 mmol) was added THF (10 mL) and the solution was cooled to -45 C. using a CH3CN-CO2 bath. n-BuLi (2.5 M in hexanes, 1.4 mL, 3.5 mmol) was added dropwise which afforded an opaque white suspension. The mixture was stirred at -43 C. for 20 minutes, then a homogeneous solution of (4-chloro-3-isobutyl-2-methoxyquinolin-6-yl)(1,2-dimethyl-1H-imidazol-5-yl)methanone (550 mg, 1.48 mmol, Intermediate 65) in 3 mL THF was introduced. After 10 minutes, the reaction flask was then placed in an ice-water bath. The reaction mixture was quenched after 30 minutes with aqueous NH4Cl solution and the aqueous portion was extracted with EtOAc (4*30 mL) and EtOAc:THF (1:1, 30 mL). The combined organics were washed with brine, dried over MgSO4, filtered and concentrated. Chromatography on silica gel (5% MeOH-DCM increasing to 10% MeOH-DCM) provided the title compound as a tan amorphous solid. 1H NMR (400 MHz, CD3OD) delta 8.19 (d, J=2.1 Hz, 1H), 7.85 (d, J=8.7 Hz, 1H), 7.52 (dd, J=8.7, 2.2 Hz, 1H), 7.17 (s, 1H), 6.11 (s, 1H), 4.09 (s, 3H), 3.98 (s, 3H), 3.47 (s, 3H), 2.85 (d, J=7.3 Hz, 2H), 2.37 (s, 3H), 2.11 (hept, J=6.9 Hz, 1H), 0.96 (d, J=6.6 Hz, 6H). MS (ESI): mass calcd. for C23H27ClN6O2, 454.2. m/z found 455.0 [M+H]+. The racemate was separated by chiral SFC (Stationary phase: CHIRALPAK AD-H 5 mum, 250¡Á30 mm, Mobile phase: 70% CO2, 30% mixture of MeOH/iPrOH 50/50 v/v (+0.3% iPrNH2)), to give Example 134b as the first compound that eluted from the chiral column and Example 134c as the second compound that eluted from the chiral column.

The synthetic route of 1-Methyl-1H-1,2,3-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics