Day: March 9, 2021

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 584-13-4, name is 4H-1,2,4-Triazol-4-amine, A new synthetic method of this compound is introduced below., COA of Formula: C2H4N4

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 13423-60-4, name is 1-Phenyl-1H-1,2,4-triazole, A new synthetic method of this compound is introduced below., Safety of 1-Phenyl-1H-1,2,4-triazole

A mixture of 1-phenyl-H-1,2,4-triazole 24 (364.3 mg, 2.51 mmol) and 2-fluoroethyl triflate (492.7 mg, 2.5 mmol) in toluene (2.5 ml) was heated at 130 C for 48 h. The solvent was evaporated and ther esidue titruated with Et2O (10 ml) to give the product as a white solid (803 mg, 94%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Paul, Susann; Schweizer, W. Bernd; Rugg, Graham; Senn, Hans Martin; Gilmour, Ryan; Tetrahedron; vol. 69; 27-28; (2013); p. 5647 – 5659;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 16681-65-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 1-methyl-1 H-1 ,2,3-triazole (Preparation 32, 0.1 g, 1.2 mmol) in tetrahydrofuran (THF, 10 ml) at -780C was added dropwise 1.6 M n-butyl lithium (0.9 ml, 1.4 mmol), maintaining the temperature below -6O0C. The reaction was stirred at – 780C for 30 minutes, then dimethylformamide (0.14 ml, 1.8 mmol) was added. The reaction was warmed to room temperature and stirred for 1 hour. The reaction was quenched with water and extracted with ethyl acetate (3 x 10 ml). The combined organic extracts were washed with water (3 x 10 ml), dried over MgSO4 and concentrated in vacuo. The residue was purified by silica gel column chromatography, eluting with 95:5 to 100:0 dichloromethane:methanol, to afford the title compound as a yellow oil (0.04 g, 30% yield).1HNMR (CDCI3): 4.10 (s, 3H)1 7.88 (s, 1 H), 9.55 (s, 1 H)

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Methyl-1H-1,2,3-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; PFIZER LIMITED; WO2008/135826; (2008); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 61-82-5, name is 1H-1,2,4-Triazol-5-amine, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 1H-1,2,4-Triazol-5-amine

General procedure: 20 mg of gamma-Fe2O3Ph-PMO-NaHSO4 was added to a roundbottomflask containing an aromatic aldehyde (1 mmol), 3-amino-1,2,4-triazole 2 (1.0 mmol), b-diketones (dimedone 3, 1,3-cyclohexadione 4 or ethyl acetoacetate 5) (1.0 mmol) and stirredunder solvent-free conditions at 100 C in certain times. Meanwhile,the progress of the reactionwas indicated by TLC (n-hexane:ethyl acetate; 7:3). With completing the reaction, 3ml ethanol waspoured and the magnetic nanocomposite was separated in thepresence of a magnetic stirring bar; the reaction mixture becameclear. The crude product was recrystallized from ethanol to give thepure product. The pure products were characterized by conventionalspectroscopic methods. Physical and spectral data for theselected compounds are represented below.

According to the analysis of related databases, 61-82-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Haghighat, Mahdieh; Shirini, Farhad; Golshekan, Mostafa; Journal of Molecular Structure; vol. 1171; (2018); p. 168 – 178;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 16681-65-5, category: Triazoles

Step B: To a solution of l-methyl-lH-l,2,3-triazole (860 mg, 10.4 mmol) in THF (10 mL) at -78 C, was added dropwise n-BuLi (5.0 mL, 12.4 mmol, 2.5 M). The mixture was stirred at -78 C for 2 hours before addition of BusSnCl (3.7 g, 11.4 mmol). The mixture was stirred at -78 C for 1 hour and then room temperature for 1 hour. The mixture was concentrated under vacuum and hexane was added. The insoluble material was filtered and the filtrate was concentrated under vacuum to afford l-methyl-5-(tributylstannyl)-lH-l,2,3-triazole (3.1 g, 80 %) as yellow oil which was used directly in the next step.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; GENENTECH, INC.; F. HOFFMANN-LA ROCHE AG; YUK, Inn H.; PURKEY, Hans; O’BRIEN, Thomas; WO2015/142903; (2015); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 16681-67-7,Some common heterocyclic compound, 16681-67-7, name is 4-Bromo-2-methyl-2H-1,2,3-triazole, molecular formula is C3H4BrN3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 4-bromo-2-methyl-2H-1,2,3-triazole (250 mg, 1.543 mmol) in 1,4-dioxane (20 mL) were added 4,4,4?,4?,5,5,5?,5?-octamethyl-2,2?-bi(1,3,2-dioxaborolane) (780.9 mg, 3.086 mmol) and KOAc (454.8 mg, 4.630 mmol). The mixture was degassed for 10 mm, followed by addition of Pd(Ph3P)4 (126.0 mg, 0.154 mmol), and degassed for another 10 mm. The reaction mixture was sealed, stirred at 80C for 3h, and cooled to rt. To the mixture was added a mixture of Intermediate 3 (426.7 mg, 0.77 1 mmol) and K2C03 (1.064 g, 7.7 17 mmol) in toluene/H20/ethanol (30 mL). The mixture was degassed for 10 mm, followed by addition of Pd(Ph3P)4 (178.2 mg, 0.154 mmol), and degassed for anotherlO mm. After being stirred at 80C for 16h, the mixture was cooled to rt, diluted with cold water, and extracted with EtOAc. The combined organic layers were washed with water and brine, dried over Na2SO4 and concentrated. The crude compound was purified by column chromatography using 60% EtOAc/hexanes to afford 58-1 (300 mg, 35%). LCMS: 556.1 [M+Hjt

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Bromo-2-methyl-2H-1,2,3-triazole, its application will become more common.

Reference:
Patent; KALYRA PHARMACEUTICALS, INC.; HUANG, Peter, Qinhua; KAHRAMAN, Mehmet; BUNKER, Kevin, Duane; (194 pag.)WO2018/67512; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 16681-70-2,Some common heterocyclic compound, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of tert-butyl-3,8-diazabicyclo[3.2.1 ]octane-3-carboxylate (0.3 mmol, 750 mu, 0.4 M) in DCE were added benzenesulfonyl chloride (0.45 mmol, 900 mu, 0.5M, 1 .5 eq) in DCE and 0.9 mmol DIPEA (156 mu, 3 eq) and the mixture was shaken overnight at RT. 2 mL TFA/DCE 3:1 were added and the mixture was shaken at RT for 3 h. After evaporation of the solvent, 1 H-1 ,2,3-triazole-5-carboxylic acid (0.6 mmol, 1 .2 mL, 2 eq, 0.5M) in NMP, 928 mu DIPEA (3.6 mmol, 12 eq; adjustment of pH to 8) and HATU (0.6 mmol, 1.2 mL, 2 eq, 0.5 M) in NMP were added and the mixture was shaken overnight to yield after preparative HPLC 26 mg (25%) of the title compound 3,8- diazabicyclo[3.2.1 ]oct-3-yl(1 H-1 ,2,3-triazol-4-yl)methanone.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-[1,2,3]Triazole-4-carboxylic acid, its application will become more common.

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; KOPPITZ, Marcus; SIEBENEICHER, Holger; STEUBER, Holger; TER LAAK, Antonius; NUBBEMEYER, Reinhard; ROTTMANN, Antje; IRLBACHER, Horst; BADER, Benjamin; PETERS, Michaele; WAGENFELD, Andrea; TEREBESI, Ildiko; (123 pag.)WO2017/202817; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7411-23-6, A common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 3,5-dibromo-lh-l,2,4-triazole (150.0 g, 661.2 mmol) in tetrahydrofuran (1500 mL) was slowly added p-toluenesulfonic acid (17.1 g, 99.2 mmol), followed by 3,4-dihydro-2h-pyran (166.9 g, 1983.6 mmol) at 0 C. After addition, the reaction mixture was heated at 70 C for 3 h and concentrated under reduced pressure. The residue was poured into water (500 mL) and adjusted to pH = 9 by addition of saturated aqueous sodium bicarbonate. The resulting mixture was extracted with ethyl acetate (3 x 400 mL). The combined organic layers were dried over sodium sulfate and concentrated under reduce pressure. The resulting crude product was washed with methanol (2 x 50 mL), dried under reduced pressure to give crude 3,5-dibromo-l-tetrahydropyran-2-yl-l,2,4- triazole (155 g, 75%) as a white solid. XH NM (400 MHz, CDCI3) delta 5.49 – 5.46 (m, 1H), 4.12 – 3.99 (m, 1H), 3.72 – 3.61 (m, 1H), 2.38 – 2.26 (m, 1H), 2.18 – 2.07 (m, 1H), 1.98 – 1.90 (m, 1H), 1.78 – 1.60 (m, 3H).

The synthetic route of 7411-23-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; CHEN, Huifen; HAMILTON, Gregory; PATEL, Snahel; ZHAO, Guiling; DANIELS, Blake; STIVALA, Craig; (208 pag.)WO2019/72942; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 61-82-5, These common heterocyclic compound, 61-82-5, name is 1H-1,2,4-Triazol-5-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of aldehyde (1 mmol), dimedone (1 mmol), 3-amino-1,2,4-triazole (1 mmol), and [C4(H-DABCO)2][HSO4]4 (16 mg) washeated in an oil bath (90 C) under solvent-free conditions. Aftercompletion of the reaction, as identified by TLC, using n-hexane:EtOAc (7:3) as the eluent, 10 mL of water was added and stirredfor 10 min. The catalyst was dissolved in water and the solid wasfiltered off and washed with warm EtOH, to obtain the pure targetmolecule.

Statistics shows that 1H-1,2,4-Triazol-5-amine is playing an increasingly important role. we look forward to future research findings about 61-82-5.

Reference:
Article; Safari, Niloufar; Shirini, Farhad; Tajik, Hassan; Journal of Molecular Structure; vol. 1201; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 16681-70-2, Recommanded Product: 16681-70-2

1,2,3-Triazole-4-carboxylic acid (14 mg, 124 mumol), DIPEA (86.3 muL, 496 mumol) and HATU (47.1 mg, 124 mumol) were combined in DMF (0.2 mL) and stirred for 5 minutes at room temperature. This was then combined with (2S,4R)-4-amino-5-biphenyl-4-yl-2-hydroxymethyl-2-methyl-pentanoic acid 2-(2-oxo-pyrrolidin-1-yl)-ethyl ester (52.6 mg, 124 mumol). The resulting mixture was stirred for 15 minutes and the reaction was quenched with AcOH. The product purified by preparative HPLC and lyophilized to yield the title compound (13 mg; purity 95%). MS m/z [M+H]+ calc’d for C28H33N5O5, 520.25. found 520.4.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1H-[1,2,3]Triazole-4-carboxylic acid, and friends who are interested can also refer to it.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics