Day: March 12, 2021

Application of 16681-65-5,Some common heterocyclic compound, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The title compound was prepared according to the patent application WO2008/135826. To a 50 mL 2-necked flask containing 1-methyl-1H-1,2,3-triazole (1.0 g, 12.0 mmol, prepared according to PCT Int. Appl., 2008098104) was added THF (45 mL) and the colorless solution was cooled to -40 C. Then, n-BuLi (2.5 M in hexanes, 4.8 mL) was added dropwise which afforded a dark reddish-brown viscous solution. The mixture was stirred between -30 to -20 C. for 45 minutes, then neat DMF (3 mL, 38.5 mmol) was introduced at -10 C. The mixture was allowed to warm up to room temperature and stirred for 60 minutes, followed by pouring into water. The aqueous portion was extracted with EtOAc (4*50 mL) and the combined organics were washed with brine, dried over MgSO4, filtered and concentrated. The aqueous portion was back-extracted with DCM (3*50 mL) and dried as above. The combined organics were concentrated to give a light brown oil that was much more UV active than the starting material. TLC in either 25% CH3CN-DCM or 25% EtOAc-DCM showed the product to have a slightly higher Rf than the starting material. Chromatography on silica gel (100% DCM increasing to 25% CH3CN-DCM) provided the titled material as a colorless oil.

The synthetic route of 16681-65-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Pierce, Joan; Goldberg, Steven; Fourie, Anne; Xue, Xiaohua; US2014/107094; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

1186050-58-7, name is 2-Fluoro-6-(2H-1,2,3-triazol-2-yl)benzoic acid, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. category: Triazoles

A solution of 1 , 1 -dimethyl-4-(((3i?,6i?)-6-methylpiperidin-3-yl)oxy)furo[3.4- c]pyridin-3(lH)-one hydrogen chloride (0.050 g, 0.16 mmol), 2-fluoro-6-(2H)-l,2,3-triazol-2-yl) benzoic acid (0.036 g, 0.18 mmol), benzotriazole-l-yl-oxy-tris-(dimethylamino)-phosphonium hexaflurophosphate (Bop, 0.092 g, 0.21 mmol), and triethylamine (0.067 mL, 0.48 mmol) in DMF (1 mL) was stirred at RT overnight. The reaction was concentrated in vacuo and azeotroped 3x with toluene. The residue was purified by silica gel gradient chromatography (0-80% ethyl acetate in hexanes), providing the titled compound. HRMS m z (M+H) 466.1890 found, 466.1887 required.

The synthetic route of 1186050-58-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; SKUDLAREK, Jason, W.; WO2015/95442; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 4922-51-4,Some common heterocyclic compound, 4922-51-4, name is 4-(4H-1,2,4-Triazol-3-yl)aniline, molecular formula is C8H8N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 6 Preparation of (3Z)-3-{[4-(1H-1,2,4-triazol-3-yl)anilino]methylene}-1,3-dihydro-2H-indol-2-one Prepared in an analogous manner to Example 1 using one equivalent of 4-(1H-1,2,4-triazol-3-yl)aniline in place of 5-aminobenzimidazolone. 1H NMR (400 MHz, d6-DMSO) delta14.32 (s, 1H, exchangeable); 14.05 (s, 1H, exchangeable); 10.82 (m, 1H); 10.54 (m, 1H); 8.64 (m, 1H); 8.60 (s, 1H, exchangeable); 8.00 (m, 2H); 7.63 (m, 1H); 7.47 (m, 1H); 7.03 (m, 1H); 6.94 (m, 1H); 6.85 (m, 1H). APCI MS (-ve) 302.

The synthetic route of 4922-51-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Harris, Philip Anthony; McNutt JR., Robert Walton; Kuyper, Lee Frederick; Lackey, Karen Elizabeth; Peel, Michael Robert; Wood III, Edgar Raymond; US2003/225090; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 16681-70-2, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, This compound has unique chemical properties. The synthetic route is as follows.

To a stirred solution of 2S,45)-4-amino-5-biphenyl-4-yl-2-(2- hydroxyethoxymethyl)pentanoic acid ethyl ester (17 mg, 47 muiotaetaomicron) in DMF (0.3 mL), was added lH-l,2,3-triazole-4-carboxylic acid (5.3 mg, 47 muiotaetaomicron) and HATU (18 mg, 47 muetaiotaomicron), followed by DIPEA (25 mu^, 141 muetaiotaomicron). The mixture was stirred for 30 minutes, then concentrated under reduced pressure to yield crude Compound 1, which was used in the next step without purification.

The chemical industry reduces the impact on the environment during synthesis 1H-[1,2,3]Triazole-4-carboxylic acid. I believe this compound will play a more active role in future production and life.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; FLEURY, Melissa; BEAUSOLIEL, Anne-Marie; HUGHES, Adam D.; LONG, Daniel D.; WILTON, Donna A.A.; WO2015/116786; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 4928-87-4 as follows. Safety of 1,2,4-Triazole-3-carboxylic acid

A mixture of 5-(8-azabicyclo[3.2.1]octan-3-yl)-3-(6-phenylpyridin-3-yl)-8,9- dihydropyrazolo[l,5-a]pyrido[3,2-e]pyrimidin-6(7H)-one (86 mg, 0.19 mmoL), 1H-1,2,4- triazole-3-carboxylic acid (25.9 mg, 0.23 mmoL), EDC (73 mg, 0.38mmoL), HOBt (51.6 mg, 0.38 mmoL) and DIEA (199 uL, 1.15 mmoL) in DMF (4 mL) was stirred at room temperature for 2h. Purification with prep-LC provided 5-(8-(4H-l,2,4-triazoIe-3-carbonyl)-8- azabicyclo[3.2.1 ]octan-3-yl)-3-(6-phenylpyridin-3-yl)-8,9-dihydropyrazolo[l ,5-a]pyrido[3,2- e]pyrimidin-6(7H)-one: LCMS tR = 2.33 Min (10 min run, UV 254nm)- Mass calculated for, M+ 545.2, observed LC/MS m/z 546.01 (M+H).

According to the analysis of related databases, 4928-87-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SCHERING CORPORATION; MENG, Zhaoyang; REDDY, Panduranga Adulla, P.; SIDDIQUI, M. Arshad; MANDAL, Amit, K.; LIU, Duan; ZHAO, Lianyun; MCRINER, Andrew; WO2012/27234; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, A new synthetic method of this compound is introduced below., Quality Control of 3-Methyl-1H-1,2,4-triazole

To a mixture of 3-methyl- lH- l,2,4-triazole (330 mg, 3.97 mmol), 5-chloro-2-fluoro- benzaldehyde (425 mg, 2.68 mmol) in DMSO (5.0 mL) is added K2C03 (725 mg, 5.25 mmol). The reaction mixture is stirred at 100 C for 2 hours. The reaction mixture is allowed to cool to room temperature, diluted with CH2C12 (100 mL), and washed with H20 (75 mL x2). The organic layer is dried with Na2S04 and filtered. The filtrate is concentrated under reduced pressure and the residue is purified by silica gel flash column chromatography with 5% MeOH in EtOAc as the eluent to afford an impure mixture of 5-chloro-2-(3-methyl- l,2,4-triazol-l-yl)-benzaldehyde plus regiosiomer (270 mg).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; CHEN, Zhidong; HAO, Ming-Hong; LIU, Weimin; LO, Ho-Yin; LOKE, Pui Leng; MAN, Chuk, Chui; MORWICK, Tina, Marie; NEMOTO, Peter, Allen; TAKAHASHI, Hidenori; TYE, Heather; WU, Lifen; WO2011/68821; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 16681-70-2, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 16681-70-2 as follows.

[0427] To a stirred solution of (2S,4S)-4-amino-5-bipheny1-4-y 1-2-(3 -hydroxypropoxymethy l)pentanoic acid ethy Iester (18 mg, 47 flillOI) in DMF (0.3 mL), was added IH-1,2,3-triazole-4-carboxylic acid (5.3 mg, 47 f.tmol) and HATU (18mg, 47 f.tmol), followed by DIPEA(25 f.LL, 141 f.tmol). Themixture was stirred for 30 minutes, then concentrated underreduced pressure to yield crude Compound I, which was usedin the next step without purification.

According to the analysis of related databases, 16681-70-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-36-8, Application In Synthesis of 1H-1,2,3-Triazole

Intermediate 14f (0556) 4,5-Dibromo-lH-triazole (0557) Br2 (930 g, 5.82 mol) was added dropwise to a stirred solution of lH-triazole (300.00 g, 4.34 mol, 252.10 mL) in H20 (2 L) at 40 to 45 C. The resulting solution was stirred for a further 1 hour. The precipitate was filtered off and further Br2 (617.28 g, 3.86 mol) was added to the filtrate, then it was kept at 25 C for 16 hours. A second precipitate was filtered off. The combined filtered off solids were washed with water (1 L x 3), dried under vacuum and re-crystallized from MeOH (-400 mL) to give 4,5-dibromo-lH-triazole (Intermediate 14f; 890 g, 90.39% yield) as an off-white solid, m/z (ES+) [M+H]+ (0558) 226/228/230.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; ASTRAZENECA AB; WARD, Richard, Andrew; JONES, Clifford, David; FERON, James, Lyman; (80 pag.)WO2017/80980; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 103755-58-4, These common heterocyclic compound, 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Phosphorus(III) bromide, 9.7 mL (0.05 mol), was added with vigorous stirring to a solution of 8.75 g (0.05 mol) of (1-phenyl-1H-1,2,3-triazol-4-yl)metha-nol (11) in 200 mL of anhydrous benzene. The mixture was heated for 2 h and cooled, 50 g of crushed ice was added, and the mixture was neutralized with a saturat-ed solution of sodium carbonate. The organic layer was separated and washed with a saturated solution of sodium carbonate, and the solvent was evaporated under reduced pressure. Yield 10.0 g (84%), mp 124-126C. 1 H NMR spectrum (500 MHz, DMSO-d 6 ), delta, ppm: 4.84 s (2H, CH 2 ), 7.52 t (1H, p-H, J = 7.2 Hz), 7.62 t (2H, m-H, J = 7.2 Hz), 8.92 s (1H, 5-H), 7.91 d (2H o-H, J = 7.2 Hz). Mass spectrum, m/z (I rel , %): 238 (100), 240 (97) [M + H] + . Found, %: C 45.23; H 3.30; N 17.62. C 9 H 8 BrN 3 . Calculated, %: C 45.40; H 3.39; N 17.65.

Statistics shows that (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol is playing an increasingly important role. we look forward to future research findings about 103755-58-4.

Reference:
Article; Pokhodylo; Tupychak; Shyyka, O. Ya.; Obushak; Russian Journal of Organic Chemistry; vol. 55; 9; (2019); p. 1310 – 1321; Zh. Org. Khim.; vol. 55; 9; (2019); p. 1393 – 1405,13;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 7170-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

General procedure: In a 10 mL round-bottomed flask, (2S,4R)-4-(2-chloro-4-fluorophenylsulfonyl)-N-(1- cyanocyclopropyl)- 1- (1- (trifluoromethyl)cyclopropanecarbonyl)pyffolidine-2-carboxamide (example 8b)) (400 mg, 788 imol, Eq: 1.00) was combined with DMA (5 mL) to give a colorless solution. 1H-1,2,4-triazole (111 mg, 1.58 mmol, Eq: 2.00) and cesium carbonate (513 mg, 1.58 mmol, Eq: 2.00) were added. The reaction mixture was heated to 80 C and stilTed for 3h. The reaction mixture was poured into water and extracted with EtOAc (2x). The organic layers were combined, washed with saturated aqueous NaHCO3 solution (lx),water (3x) and brine (lx). The organic layers were dried over Na2SO4 and concentrated in vacuo.The crude material was purified twice by flash chromatography (silica gel, 20g, DCM/MeOH 98/2, 19/1) and (silica gel, 20g, Heptan/AcOEt 1/2, 1/3, 1/4) to yield the title compound as a white foam (264 mg; 60%). :_Example 11 was obtained as a byproduct during the synthesis of example 10 as a white solid (34 mg; 7%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; HAAP, Wolfgang; KUHN, Bernd; LUEBBERS, Thomas; PETERS, Jens-Uwe; (93 pag.)WO2017/144483; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics