Day: March 15, 2021

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C2HBr2N3

General procedure: 3,5-Dibromo-1,2,4-triazole (1; 658 mg, 2.9 mmol) or 3-chloro-1,2,4-triazole (300 mg, 2.9 mmol), o-quinone methide precursor 2 (2.9mmol), and K2CO3 (1.2 g, 8.7 mmol) were refluxed for 4 h in DMF (10mL). After completion of the reaction, the mixture was cooled, andpoured into H2O (30 mL). The precipitate formed was collected by filtration,washed with H2O, dried, and recrystallized.

The synthetic route of 7411-23-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Osipov, Dmitry V.; Osyanin, Vitaly A.; Voskressensky, Leonid G.; Klimochkin, Yuri N.; Synthesis; vol. 49; 10; (2017); p. 2286 – 2296;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 7343-33-1,Some common heterocyclic compound, 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole, molecular formula is C2H2BrN3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A dry round bottom flask was charged with potassium phosphate (K3PO4, 7.74 g, 36.5 mmol), CuI (0.165 g, 0.868 mmol), and 3-bromo-1H-1,2,4-triazole (2.83 g, 19.10 mmol). The flask was evacuated/backfilled with N2 (3*). DMF (34.7 ml) was added, followed by trans-(1R,2R)-N,N’-bismethyl-1,2-cyclohexane diamine (0.274 ml, 1.736 mmol) and 1-iodo-4-(trifluoromethoxy)benzene (5 g, 17.36 mmol). The solution was heated to 110¡ã C. After 48 h, the reaction mixture was cooled to RT, diluted with EtOAc and filtered through Celite?. The filtrate was washed with water (100 mL) containing 10 mL 1 M HCl. The organics were separated, and the aqueous phase was further extracted with EtOAc (3*). The organics were combined, dried, and concentrated in vacuo. Purification via flash column chromatography (EtOAc/hexanes) yielded the title compound as a tan solid (1.86 g, 34percent): 1H NMR (400 MHz, CDCl3) delta 8.44 (s, 1H), 7.70 (d, J=8.9 Hz, 2H), 7.38 (d, J=8.5 Hz, 2H); 19F NMR (376 MHz, CDCl3) delta -58.04; EIMS m/z 307 ([M]+).

The synthetic route of 7343-33-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Dow AgroSciences LLC; GIAMPIETRO, Natalie C.; DENT, III, William Hunter; US2014/275565; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 423165-07-5, These common heterocyclic compound, 423165-07-5, name is exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To an aqueous solution of active hydrogen containing amide, few drops of aqueous ammonia solution (1 eq.) and secondary amine (1 eq.) were added in drops in an ice-cold solution under constant stirring for dissolution. Aromatic aldehydes dissolved in methanol, added dropwise to the above mixture and stirring was continued for 2 h. The formation of compounds were observed within 30 min. Reaction was monitored by TLC, after completion of reaction, the product was filtered and washed with distilled water and dried at 45-50 C.

Statistics shows that exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane is playing an increasingly important role. we look forward to future research findings about 423165-07-5.

Reference:
Article; Viveka, T. Lakshmi; Sharada, L. Nalanda; Asian Journal of Chemistry; vol. 30; 9; (2018); p. 2029 – 2034;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 202931-88-2 as follows. name: 1-Methyl-1H-1,2,3-triazole-5-carbaldehyde

Intermediate 9: Step a (4-Chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanol To a flask containing 6-bromo-4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinoline (1.45 g, 3.37 mmol, Intermediate 5: step d) was added THF (25 mL) and the solution was cooled to -75 C. n-BuLi (2.5 M in hexanes, 1.3 mL, 3.25 mmol) was then added dropwise. After 2 minutes, 1-methyl-1H-1,2,3-triazole-5-carbaldehyde (580 mg, 5.22 mmol, in 3 mL THF) was introduced. The reaction mixture was allowed to warm to -20 C. over 45 minutes at which time the reaction was quenched with aqueous NH4Cl solution. The aqueous portion was extracted with EtOAc (5*40 mL) and the combined organics were washed with brine, dried over MgSO4, filtered and concentrated to dryness. Chromatography on silica gel (5% CH3CN-DCM increasing to 30% CH3CN+2% MeOH) provided the title compound as an off white amorphous solid.

According to the analysis of related databases, 202931-88-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; US2015/105369; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 423165-07-5,Some common heterocyclic compound, 423165-07-5, name is exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane, molecular formula is C13H22N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 7: 1-acetyl-N-(3-chloro-4-methylphenyl)-N-(3-(3-exo-(3-isopropyl-5-methyl-4-hydro-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]oct-8-yl)propyl)-4-piperidinylcarboxamide (compound 11) A solution of 1-acetyl-N-(3-chloro-4-methylphenyl)-N-(3-chloropropyl)-4-piperidinylcarboxamide (185 mg, 0.5 mmol), the product prepared in step 6 (129 mg, 0.55 mmol) and triethylamine (0.21 mL, 1.5 mmol) in acetonitrile (5 mL) was stirred and refluxed for 24 hours, and then vaporized off the solvent, diluted with ethyl acetate, and washed with water and saline respectively. The separated organic phase was dried with sodium sulfate and concentrated under reduced pressure. The concentrate was separated through column chromatography (dichloromethane/methanol=20/1 to 10/1, v/v) to give a yellowish foam-like product (28 mg, yield: 10%). 1HNMR (CDCl3, 300 MHz) delta: 7.36-7.30 (m, 1H), 7.20 (s, 1H), 7.01-6.97 (m, 1H), 4.55-4.48 (m, 1H), 4.30-4.20 (m, 1H), 3.49-3.44 (m, 1H), 3.31 (br-s, 2H), 3.00-2.96 (m, 1H), 2.89-2.79 (m, 1H), 2.43 (s, 3H), 2.48-2.35 (m, 6H), 2.05 (s, 3H), 2.18-1.96 (m, 5H), 1.75-1.62 (m, 12H), 1.38-1.25 (m, 6H);

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane, its application will become more common.

Reference:
Patent; SHANGHAI TARGETDRUG CO., LTD.; SHANGHAI INSTITUTE OF MATERIA MEDICA, CHINESE ACADEMY OF SCIENCES; US2011/251192; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 4922-98-9, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 4922-98-9 as follows.

General procedure: Solution A. A solution of KOH (0.56 g, 0.01 mol) and potassium salt of ethyl nitrocyanoacetate (1.96 g, 0.01 mol) in2 (8 ml) was stirred at room temperature for 3 h, then kept overnight. 4 M aqueous KOAc (8 ml, 0.03 mol) was added to the resulting solution, and the mixture cooled to 5¡ã. A mixture of 3-aminoazole 1a?i (0.010 mol), EtOH (10 ml),H2O (10 ml), and concentrated HCl (2.5 ml, 0.030 mol)was treated with a solution of NaNO2 (0.759 g, 0.011 mol)in H2O (3 ml) at ?5 ¡ã. The reaction mixture was kept at this temperature for 10 min, then added to the solution A. The mixture was kept at room temperature for 1 h; the formed precipitate was filtered, stirred with 40percent aqueous H2SO4 (10 ml) (AcOH (10 ml) was used for compound 4e), filtered, and dried. The obtained hydrazone 3a?i was heated under reflux in DMF for 3 h. The solvent was evaporated, the residue triturated in water, filtered, and dried.

According to the analysis of related databases, 4922-98-9, the application of this compound in the production field has become more and more popular.

Reference:
Article; Voinkov, Egor K.; Ulomskiy, Eugeny N.; Rusinov, Vladimir L.; Chupakhin, Oleg N.; Gorbunov, Evgeny B.; Drokin, Roman A.; Fedotov, Victor V.; Chemistry of Heterocyclic Compounds; vol. 51; 11-12; (2015); p. 1057 – 1060; Khim. Geterotsikl. Soedin.; vol. 51; 11-12; (2015); p. 1057 – 1060,4;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 7411-23-6,Some common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 3,5-Dibromo-1,2,4-triazole (1; 658 mg, 2.9 mmol) or 3-chloro-1,2,4-triazole (300 mg, 2.9 mmol), o-quinone methide precursor 2 (2.9mmol), and K2CO3 (1.2 g, 8.7 mmol) were refluxed for 4 h in DMF (10mL). After completion of the reaction, the mixture was cooled, andpoured into H2O (30 mL). The precipitate formed was collected by filtration,washed with H2O, dried, and recrystallized.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3,5-Dibromo-1H-1,2,4-triazole, its application will become more common.

Reference:
Article; Osipov, Dmitry V.; Osyanin, Vitaly A.; Voskressensky, Leonid G.; Klimochkin, Yuri N.; Synthesis; vol. 49; 10; (2017); p. 2286 – 2296;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 16681-70-2,Some common heterocyclic compound, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

B. (2S,4S)-5-Biphenyl-4-yl-2-hydroxymethyl-4-[(3H-[1,2,3]-triazole-4-carbonyl)-amino]-pentanoic acid (R7=H) 1,2,3-Triazole-4-carboxylic acid (87.3 mg, 772 mumol, 1.5 eq.) was combined with HATU (293 mg, 772 mumol, 1.5 eq.) and DIPEA (179 muL, 2.0 eq.) and stirred for 5 minutes at room temperature in DCM (3 mL) to yield the activated acid. (2S,4S)-5-Biphenyl-4-yl-4-t-butoxycarbonylamino-2-hydroxymethyl-pentanoic acid ethyl ester (220 mg, 514 mumol, 1.0 eq.) was combined with DCM and TFA (1 mL each), and stirred at room temperature for 1 hour. The mixture was evaporated and azeotroped with toluene (2*). The activated acid was added and the resulting mixture was stirred for 2 hours. The reaction was quenched with water and extracted with DCM. The layers were separated, and the organic layer was dried and evaporated. Two-thirds of the product was purified by preparative HPLC to yield compound A (R7=-CH2CH3) (60 mg, 98% purity), MS m/z [M+H]+ calc’d for C23H26N4O4, 423.40. found 423.2. One-third of the product was hydrolyzed by adding 1 M of NaOH in water (619 muL) in THF (1 mL). The mixture was stirred at room temperature for 1 hour. The solvent was evaporated and the resulting material purified by preparative HPLC to yield compound B (R7=H) (35 mg, 99% purity), MS m/z [M+H]+ calc’d for C21H22N4O4, 395.16. found 395.2.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-[1,2,3]Triazole-4-carboxylic acid, its application will become more common.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 16681-70-2 as follows. Recommanded Product: 1H-[1,2,3]Triazole-4-carboxylic acid

1,2,3-Triazole-4-carboxylic acid (14 mg, 124 mumol), DIPEA (86.3 muL, 496 mumol) and HATU (47.1 mg, 124 mumol) were combined in DMF (0.2 mL) and stirred for 5 minutes at room temperature. This was then combined with (2S,4R)-4-amino-5-biphenyl-4-yl-2-hydroxymethyl-2-methyl-pentanoic acid butyryloxymethyl ester (51 mg, 120 mumol). The resulting mixture was stirred for 15 minutes and the reaction was quenched with AcOH. The product purified by preparative HPLC and lyophilized to yield the title compound (1 mg; purity 95%). MS m/z [M+H]+ calc’d for C27H32N4O6, 509.23. found 509.4.

According to the analysis of related databases, 16681-70-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C2H4N4

A mixture of aldehyde (1 mmol), dimedone (1 mmol), 3-amino-1,2,4-triazole (1 mmol), and [C4(H-DABCO)2][HSO4]4 (16 mg) washeated in an oil bath (90 C) under solvent-free conditions. Aftercompletion of the reaction, as identified by TLC, using n-hexane:EtOAc (7:3) as the eluent, 10 mL of water was added and stirredfor 10 min. The catalyst was dissolved in water and the solid wasfiltered off and washed with warm EtOH, to obtain the pure targetmolecule.

The synthetic route of 61-82-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Safari, Niloufar; Shirini, Farhad; Tajik, Hassan; Journal of Molecular Structure; vol. 1201; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics