Day: April 19, 2021

Synthetic Route of 16681-65-5, A common heterocyclic compound, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

[00112] 1 -Methyl-1 H-1 ,2,3-triazole (41 mg, 0.495 mmol) was dissolved in THF (4.9 mL) and cooled to -78 C. n-Butyllithium solution in hexanes (240 muIota_, 0.594 mmol) was added dropwise and the solution was stirred for further 5 min before zinc(ll) chloride (3.0 mL, 1 .485 mmol) was added. After 30 min at -78 C, the reaction mixture was diluted with DMF (2.0 mL), tetrakis(triphenylphosphine)palladium(0) (29 mg, 0.025 mmol) and a solution of 4-bromo-2-methoxy-1 -nitrobenzene (1 15 mg, 0.495 mmol) in DMF (500 mu) were added. The solution was stirred at 80 C for 2.5 h. After the mixture was cooled to room temperature, water and EtOAc were added and the phases were separated. The organic phase was washed with water, brine, dried (Na2S04) and the solvent was removed in vacuo. The residue was purified by Biotage silica gel column chromatography eluting with DCM/EtOAc (99/1 to 90/10, 10 g column) to afford the title product as a pale yellow solid (82 mg, 70.7 %). 1 H NMR (500 MHz, CDCI3): <5 4.04 (s, 3H), 4.14 (s, 3H), 7.10-7.13 (m, 2H), 7.82 (s, 1 H), 7.98-8.01 (m, 1 H); LC (Method B)-MS (ESI, m/z) fR 1 .97 min, 235 [(M+H+), 100%]. The synthetic route of 16681-65-5 has been constantly updated, and we look forward to future research findings. Reference:
Patent; CANCER RESEARCH TECHNOLOGY LIMITED; NAUD, Sebastien Gaston Andre; BLAGG, Julian; (38 pag.)WO2017/109476; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7170-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 3-methyl-lH-l,2,4~triazole (7.3 g, 88 mmol) in DMF (75 mL) was added K2CO3 (60.7 g5 439 mmol) and 2-bromopropionic acid teri-butyl ester (14.6 mL, 88 mmol). The reaction was stirred at room temperature overnight. The mixture was diluted with EtOAc (500 mL), washed with water (x 3) then brine. Dried over MgS04 and concentrated. The residue was purified by column chromatography on silica gel, eluting with EtOAc/isohexane (20 to 100%) to give 13 g of crude product as a 3:1 mixture of regioisomers. The mixture was purified by Cbiralcel OD with a gradient from 4% to 30% IP A/Heptane. Then the first two peaks were separated with Chiracel OD column isocratically eluting with 4% IP A/Heptane. The second peak was collected as the desired single stereoisomer (R or S) (2 -(3 -methyl- 1H- 1,2, 4- triazol-l-yl)propanoic acid iert-butyl ester) (3.5 g, 19%). 1H-NMR (500 MHz, CDC13) delta 8.05 (s, 1 H), 4.90 (q, J – 7 Hz, 1 H), 2.35 (s, 3 H), 1.72 (d, J = 7 Hz, 3 H), 1.40 (s, 9 H). ESI-MS calculated for C10H17N3O2: Exact Mass: 211.13; Found 156.05 (-tBu).

The synthetic route of 3-Methyl-1H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; NAGABUKURO, Hiroshi; EDMONDSON, Scott, D.; SINHAROY, Mary, Struthers; DENNEY, William, S.; FRENKL, Tara, L.; WO2011/43942; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-88-0, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 288-88-0, name is 1H-1,2,4-Triazole, This compound has unique chemical properties. The synthetic route is as follows.

Operating protocol A (82 C., 48 hours) was followed using 117 mg of Chxn-Py-Al (0.4 mmoles), 336 mul of iodobenzene (3 mmoles), 138 mg of 1,2,4-triazole (2 mmoles), 1.042 g of caesium carbonate (3.2 mmoles) and 1.2 ml of DMF. The degree of transformation and selectivity were 100% and 98% respectively. The residue obtained following treatment was purified by silica gel chromatography (eluent: hexane/dichloromethane, 100/0 to 50/50). 264 mg of a dark yellow solid was obtained in a yield of 91%. Pale yellow needles were obtained after re-crystallisation from chloroform. The compound obtained had the following formula: The characteristics were as follows: MPt: 46 C. (CHCl3) (Lit: 46-47 C. given by Micetich, R G; Spevak, P; Hall, T W; Bains, B K; Heterocycles 1985, 23, 1645-1649); 1H NMR/CDCl3: delta8.52 (wide s, 1H, H1), 8.04 (wide s, 1H, H2), 7.53-7.65 (m, 2H, H4,8), 7.26-7.51 (m, 3H, H5,6,7); 13C NMR/CDCl3: delta 152.55 (C1), 140.88 (C2), 139.96 (C3), 129.73 (C5 and C7), 128.15 (C6), 119.99 (C4 and C8); GC/MS: Rt=14.02 min, M/Z=145, purity=100%; Rf=0.21 (eluent: dichloromethane/ethyl acetate, 90/10). Example 1.18; Preparation of 1-phenyl-1H-[1,2,4]triazole; Operating protocol A (82 C., 24 hours) was followed using 117 mg of Chxn-Py-Al (0.4 mmoles), 336 mul of iodobenzene (3 mmoles), 138 mg of 1,2,4-triazole (2 mmoles), 1.042 g of caesium carbonate (3.2 mmoles) and 1.2 ml of DMF. The degree of transformation and selectivity were 79% and 99% respectively. ; Example 1.19; Preparation of 1-phenyl-1H-[1,2,4]triazole; Example 1.18 was repeated, operating at 50 C. (72 hours). The degree of transformation and selectivity for 1-phenyl-1H-[1,2,4-triazole] were 75% and 99% respectively.

The chemical industry reduces the impact on the environment during synthesis 1H-1,2,4-Triazole. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Taillefer, Marc; Cristau, Henri-Jean; Cellier, Pascal-Philippe; US2005/234239; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7170-01-6, Product Details of 7170-01-6

A solution of intermediate 10 (1 g; 2 mmol), 3-methyl-1 H-1 ,2,4-triazole (0.35 g, 4.2 mmol) and K2CO3 (0.72 g; 5.2 mmol) in 1 -methyl-2-pyrrolidinone (35 mL) was stirred at 135C for 18 hours. The reaction mixture was cooled down to room temperature and diluted with EtOAc and water. The organic layer was separated, washed with water, dried (MgS04), filtered and evaporated till dryness. The residue (1.8 g) was purified by chromatography over silica gel (SiOH 20-45mueta”, 450 g; mobile phase 0.1 % NH4OH, 97% DCM, 3% MeOH). The pure fractions were collected and the solvent was evaporated. The residue (0.72 g) was separated by chiral super critical fluid chromatography (CHIRALPAK AD-H 5muetaiota 250x20mm; mobile phase, 0.3% 2-propylamine, 50% C02, 50% isopropanol). The desired product fractions were collected and the solvent was evaporated. The first product was crystallized from diethyl ether. The precipitate was filtered and dried to give 0.25 g (26%) of compound 667 . MP: 181 C (DSC).The second product was crystallized from diethyl ether. The precipitate was filtered and dried to give 0.27 g (28%) of compound 668. MP: 137C (DSC).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; ASTEX THERAPEUTICS LIMITED; SAXTY, Gordon; MURRAY, Christopher William; BERDINI, Valerio; BESONG, Gilbert Ebai; HAMLETT, Christopher Charles Frederick; JOHNSON, Christopher Norbert; WOODHEAD, Steven John; READER, Michael; REES, David Charles; MEVELLEC, Laurence Anne; ANGIBAUD, Patrick Rene; FREYNE, Eddy Jean Edgard; GOVAERTS, Tom Cornelis Hortense; WEERTS, Johan Erwin Edmond; PERERA, Timothy Pietro Suren; GILISSEN, Ronaldus Arnodus Hendrika Joseph; WROBLOWSKI, Berthold; LACRAMPE, Jean Fernand Armand; PAPANIKOS, Alexandra; QUEROLLE, Oliver Alexis Georges; PASQUIER, Elisabeth Therese Jeanne; PILATTE, Isabelle Noelle Constance; BONNET, Pascal Ghislain Andre; EMBRECHTS, Werner Constant Johan; AKKARI, Rhalid; MEERPOEL, Lieven; WO2011/135376; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 61-82-5, These common heterocyclic compound, 61-82-5, name is 1H-1,2,4-Triazol-5-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of 3-amino-1,2,4-triazole or benzimidazole (1.0 mmol), benzaldehyde (1.0 mmol), dimedone (1.0 mmol), and acetonitrile (5 mL) was taken in a round bottom flask and added iodine (10 mol %) and stirred at 80 C for 10 min. After completion of the reaction, as monitored by TLC, the reaction mass was cooled to room temperature and the solid separated was filtered and washed with water and dried at reduced pressure.Data of representative examples

Statistics shows that 1H-1,2,4-Triazol-5-amine is playing an increasingly important role. we look forward to future research findings about 61-82-5.

Reference:
Article; Puligoundla, Ravinder Goud; Karnakanti, Shuklachary; Bantu, Rajashaker; Nagaiah, Kommu; Kondra, Sudhakar Babu; Nagarapu, Lingaiah; Tetrahedron Letters; vol. 54; 20; (2013); p. 2480 – 2483;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

584-13-4, name is 4H-1,2,4-Triazol-4-amine, belongs to triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 4H-1,2,4-Triazol-4-amine

1) 30 g of 5-bromomethyl-alpha, alpha, alpha ‘, alpha’-tetramethyl-1,3-benzenediacetonitrile was added successively to a glass reactor, 4-amino-1,2,4-triazole, acetonitrile 80 ml, heated to reflux under stirring, after 12 h, cooling, crystallization at 0 deg. 8h. Filtration, dried, to give 35.58 g of intermediate I, yield 93.0%;

The synthetic route of 584-13-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Yangtze River Pharmaceutical Group Jiangsu Haici Biological Pharmaceutical Co., Ltd.; Yangtze River Pharmaceutical Group Co., Ltd.; Niu, Mingyu; Ma, Lijin; Liang, Wen; Wang, Qinghui; Lu, Guihua; Lu, Tianyu; Wang, Wei; (8 pag.)CN106083748; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 4928-87-4,Some common heterocyclic compound, 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, molecular formula is C3H3N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a reaction of 1/7-1, 2, 4-triazole-3 -carboxylic acid (226 mg, 2.0 mmol) and 4- (trifluoromethyl)aniline (0.28 mL, 2.2 mmol) in dry DMF (10 mL) was added 1- hydroxybenzotriazole monohydrate (337 mg, 2.2 mmol) and EDC (N-(3-Dimethylaminopropyl)-N’-ethylcarbodiimide) (422 mg, 2.2 mmol) followed by N- methylmorpholine (0.88 mL, 8.0 mmol via syringe). The mixture was stirred at room temperature under nitrogen and the solids were gradually dissolved. The contents were stirred at room temperature for 24.0 h, and then slowly diluted into iced water and extracted with DCM (2 x 50 mL). The DCM phase was washed with ice cold water (2 x 100 mL). The DCM phase was dried over anhydrous Na2S04, concentrated under reduced pressure and chromatographed on silica gel using EtOAc and Hexanes (80:20) as eluents to get the desired amide 11 (44.4 mg, 9 % yield) as a white solid compound. -NMR (400 MHz, DMSO-de): <514.86 (br s, 1H), 10.90 (br s, 1H), 8.70 (br s, 1H), 8.12 (d, J= 8 Hz, 2H), 7.75 (d, J= 8 Hz, 2H); 19F - NMR (376 MHz, DMSO-de): <5 -60.46 ppm. MH+ = 257.0 m/z. The synthetic route of 4928-87-4 has been constantly updated, and we look forward to future research findings. Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; NATIONAL JEWISH HEALTH; WEMPE, Michael Fitzpatrick; VAZQUEZ-TORRES, Andres; DAI, Shaodong; (72 pag.)WO2020/41556; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7343-33-1, SDS of cas: 7343-33-1

To a 100 mL round bottomed flask, equipped with a stir bar, was added copper(I) iodide (0.397 g, 2.08 mmol), 3-bromo-1H-1,2,4-triazole (4.62 g, 31.2 mmol), and cesium carbonate (6.79 g, 20.83 mmol), as solids. These solids were diluted with anhydrous dimethyl sulfoxide (34.7 mL). Then 1-iodo-4-(trifluoromethoxy)benzene (1.65 mL, 10.4 mmol) was added as a liquid. The flask was placed under nitrogen atmosphere, and the suspension was heated to an internal temperature of 100¡ã C. for 20 hours. The reaction mixture was allowed to cool to room temperature and filtered through a pad of Celite?, washing with excess ethyl acetate (200 mL). The filtrate was poured into a brine solution (200 mL), and the layers were partitioned. The aqueous phase was extracted with additional ethyl acetate (2*100 mL). The combined organic layers were dried over anhydrous magnesium sulfate, filtered, and concentrated. The resulting residue was purified via flash column chromatography using 10-50percent ethyl acetate/hexanes as eluent to afford the title compound as a white solid (1.80 g, 54percent): 1H NMR (400 MHz, DMSO-d6) delta 9.35 (s, 1H), 7.97 (d, J=8.9 Hz, 2H), 7.60 (d, J=8.4 Hz, 2H); 19F NMR (376 MHz, DMSO-d6) delta -57.06; ESIMS m/z 308, 310 ([M+H]+).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; DOW AGROSCIENCES LLC; Fischer, Lindsey G.; Baum, Erich W.; Crouse, Gary D.; DeAmicis, Carl; Lorsbach, Beth; Petkus, Jeff; Sparks, Thomas C.; Whiteker, Gregory T.; US2014/274688; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 27996-86-7, These common heterocyclic compound, 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of azolyl ketone (1a/1b) (1 mmol) and aryloxy benzaldehyde (2a-f) (1 mmol) were dissolved in 10% NaOH-EtOH (5 mL), it was stirred at room temperature for 9-10 h. After completion, 5 mL water was added to the reaction mixture. The separated solid compound was filtered and washed with water. It was purified by crystallization with methanol/chloroform or basic alumina column chromatography to give the desired compounds (3-13).The compounds (16-31) were prepared by the reaction of their corresponding aldehyde and ketone partners.

Statistics shows that 4-[1,2,4]Triazol-1-yl-benzaldehyde is playing an increasingly important role. we look forward to future research findings about 27996-86-7.

Reference:
Article; Marrapu, Vijay K.; Chaturvedi, Vinita; Singh, Shubhra; Singh, Shyam; Sinha, Sudhir; Bhandari, Kalpana; European Journal of Medicinal Chemistry; vol. 46; 9; (2011); p. 4302 – 4310;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 6523-49-5 as follows. Safety of 4-(1,2,4-Triazol-1-yl)aniline

Step 1 intermediate (310 mg) was treated with DMF-DMA (5 ml) in DMF(3 ml) at 80 for 3 h. The mixture was evaporated, dissolved in toluene and concentrated to a pale yellow solid which was dried overnight. A portion of this material (74 mg) was treated with 4-triazolylaniline (57 mg) in AcOH (1 ml) at 80 for 2 h. The cooled mixture was basified with aq sodium bicarbonate and the resulting precipitate filtered, washed with water, ether and MeCN to give the title compound (88 mg, 59 %). 1H NMR delta 10.5 (IH, brs), 9.26 (IH5 s), 8.87 (IH5 s), 8.59 (3H5 m), 8.23 (IH5 s), 8.1 (3H5 m), 7.84 (5H, m) 7.47 (5H, m), 7.18 (2H, m), 5.29 (2H5 s); LC-MS rt 2.23 m/z472 ES+.

According to the analysis of related databases, 6523-49-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics