Day: April 29, 2021

Related Products of 4922-98-9, A common heterocyclic compound, 4922-98-9, name is 5-Phenyl-1H-1,2,4-triazol-3-amine, molecular formula is C8H8N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

6.02.04.37 5-bromo-3-phenyl-1H-(1,2,4)triazole 115 mL bromine hydro acid was added to 9.5 g 5-phenyl-2H-(1,2,4)triazol-3-ylamine and 12.3 g sodiumnitrite at -5¡ã C. The reaction was warmed to RT and refluxed for 20 min. Then the mixture was cooled and basicfied with sodiumdicarbonate and extracted with ethyl acetate. The organic layer was dried and evaporated to give 11 g of the desired product. Rt: 1.07 min (method B), (M+H)+: 223/225 By using the same synthesis strategy as for 5-bromo-3-phenyl-1H-(1,2,4)triazole the following compound was obtained:

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Boehringer Ingelheim International GmbH; GRAUERT, Matthias; BISCHOFF, Daniel; DAHMANN, Georg; KUELZER, Raimund; RUDOLF, Klaus; US2013/184248; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 1001401-62-2,Some common heterocyclic compound, 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, molecular formula is C9H7N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of the product from step 5 (50 mg, 0.17 mmoi), FIATU (95 mg, 0.25 mmol), TEA (0.3 mL) and 2-.(2fi-J,234riazoi-2y1)benzoic acid (34.8 mg, 0.18 mmoi) in DMF (2 mL) was stirred at RI for 9 hours under the N2 atmosphere. Then the mixture was poured into water(5 rnL x 3) and extracted with EtOAc (5 mL x 3). The combined organic layer was washed withbrine, dried over magnesium sulfate, filtered and concentrated in vacuo. The residue waspurified by Prep?HPLC to give the title compound (30 mg) as yellow oil, LRMS m/z (M¡ÂH)471.1 found, 471.1 required.

The synthetic route of 1001401-62-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; LIVERTON, Nigel; KUDUK, Scott D.; BESHORE, Doug C.; MENG, Na; LUO, Yunfu; (127 pag.)WO2016/101119; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 956317-36-5, The chemical industry reduces the impact on the environment during synthesis 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, I believe this compound will play a more active role in future production and life.

General procedure: 1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride(WSCHCl) (37.4 g, 0.20 mol) was added to a solution of Nethyl-2[3-(5-fluoro-pyridin-2-yl)-1H-pyrazol-1-yl] ethanaminedihydrochloride (50 g, 0.16 mol), 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid (33.9 g, 0.18 mol), 1-hydroxy-1H-benzotriazolehydrate (HOBtH2O) (26.4 g, 0.20 mol) and triethylamine (TEA)(39.5 g, 0.39 mol) in THF (500 mL) at 0 C, followed by stirring atroom temperature for 20.5 h. The solvent of the reaction solutionwas distilled off under reduced pressure. An aqueous NaHCO3 solutionand EtOAc were added to the resulting residue, followed byextraction with EtOAc. The organic layer was washed with water,and the solvent was distilled off under reduced pressure to yieldthe crude product (72 g). An additional 196.7 g of the crude productwas synthesized using the same method from N-ethyl-2[3-(5-fluoro-pyridin-2-yl)-1H-pyrazol-1-yl] ethanamine dihydrochloride(140 g, 0.46 mol) and 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoicacid (94.8 g, 0.50 mol). The obtained crude product (268.7 g) wasrecrystallized with heptane and EtOAc. The deposited solid wasthen collected by filtration. The obtained solid was dried by heatingunder reduced pressure to yield the title compound 27e as acolorless powder (217.3 g).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Suzuki, Ryo; Nozawa, Dai; Futamura, Aya; Nishikawa-Shimono, Rie; Abe, Masahito; Hattori, Nobutaka; Ohta, Hiroshi; Araki, Yuko; Kambe, Daiji; Ohmichi, Mari; Tokura, Seiken; Aoki, Takeshi; Ohtake, Norikazu; Kawamoto, Hiroshi; Bioorganic and Medicinal Chemistry; vol. 23; 6; (2015); p. 1260 – 1275;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 6523-49-5, These common heterocyclic compound, 6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

4-Chloro-6-iodoquinazoline (WO9609294 Al , 150 mg) was treated with 4- triazolyl aniline (28 mg, 1 eq) in MeCN and refluxed for 6 h. Cooled overnight and filtered to give the title compound (70 mg).1R NMR delta 11.75 (IH, br s), 9.4 (2H, s), 9.04 (IH, s), 8.43 (IH, d, J 8.85Hz),8.34 (IH, s), 8.0(4H, m), 7.82 (IH, d, J 8.85Hz); LC-MS rt 2.32 m/z 415 ES+.

Statistics shows that 4-(1,2,4-Triazol-1-yl)aniline is playing an increasingly important role. we look forward to future research findings about 6523-49-5.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 13273-53-5, A common heterocyclic compound, 13273-53-5, name is 4-Bromo-1-methyl-1H-1,2,3-triazole, molecular formula is C3H4BrN3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 4-bromo-1-methyl-1H-1,2,3-triazole (5 g, 30.87 mmol), tert-butyl prop-2-enoate (11.9 g, 92.85 mmol), palladium acetate (1.1 g, 4.90 mmol), tri-o-tolylphosphane (1.9 g, 6.24 mmol) and triethylamine (4.7 g, 46.45 mmol) in N,N-dimethylformamide (50 mL, 646.09 mmol) was stirred for 12 h at 110 C. The resulting mixture was cooled to room temperature and then diluted with water. The resulting solution was extracted with ethyl acetate, dried with anhydrous sodium sulfate. After filtration, the filtrate was concentrated under vacuum. The residue was purified by flash chromatography on a silica eluted with ethyl acetate/petroleum ether (3/2) to afford tert-butyl (2E)-3-(1-methyl-1H-1,2,3-triazol-4-yl)prop-2-enoate (3.6 g, 17.23 mmol) as a yellow solid. LCMS (ESI) [M+H]+=210

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Genentech, Inc.; Chan, Bryan; Drobnick, Joy; Gazzard, Lewis; Heffron, Timothy; Liang, Jun; Malhotra, Sushant; Mendonca, Rohan; Rajapaksa, Naomi; Stivala, Craig; Tellis, John; Wang, Weiru; Wei, BinQing; Zhou, Aihe; Cartwright, Matthew W.; Lainchbury, Michael; Gancia, Emanuela; Seward, Eileen; Madin, Andrew; Favor, David; Fong, Kin Chiu; Hu, Yonghan; Good, Andrew; US2018/282282; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 3-Methyl-1H-1,2,4-triazole

A mixture of tris(dibenzylideneacetone)dipalladium(0) (98%, 94.7 mg, 0.101 mmol) and di-tert-butyl[3,4,5,6-tetramethyl-2?,4?,6?-tri(propan-2-yl)biphenyl-2-yl]phosphane (95%, 103 mg, 0.203 mmol) in toluene (10 mL) was degassed with nitrogen for 5 minutes, then heated at 125 C. for 3 minutes. In a separate flask, a mixture of C43 (1.70 g, 3.38 mmol), 3-methyl-1H-1,2,4-triazole (561 mg, 6.75 mmol), and potassium phosphate (1.48 g, 6.97 mmol) in toluene (10 mL) and 1,4-dioxane (10 mL) was degassed with nitrogen for 10 minutes. The catalyst solution was transferred to the reaction flask via syringe, and the reaction mixture was heated at 125 C. for 2 hours, whereupon it was partitioned between water and ethyl acetate. The organic layer was dried over sodium sulfate, filtered, and concentrated in vacuo; silica gel chromatography (Gradient: 50% to 100% ethyl acetate in heptane) provided the product as an off-white solid. Yield: 1.3 g, 2.6 mmol, 77%. LCMS m/z 506.4 [M+H]+. 1H NMR (400 MHz, CDCl3), characteristic peaks: delta 9.52 (br s, 1H), 8.21 (d, J=7.9 Hz, 1H), 7.38 (d, J=7.8 Hz, 1H), 7.25-7.31 (m, 1H, assumed; partially obscured by solvent peak), 6.68 (d, J=10.0 Hz, 1H), 5.05 (d, J=15.2 Hz, 1H), 4.20-4.32 (m, 2H), 3.53-3.62 (m, 1H), 3.14 (d, J=15.2 Hz, 1H), 2.49 (s, 3H), 1.84 (s, 3H), 1.00 (d, J=6.6 Hz, 1H), 0.69 (d, J=6.5 Hz, 1H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 7170-01-6.

Reference:
Patent; Pfizer Inc.; Pettersson, Martin Youngjin; am Ende, Christopher William; Johnson, Douglas Scott; Kauffman, Gregory Wayne; Stepan, Antonia Friederike; Verhoest, Patrick Robert; (64 pag.)US2016/222007; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 16681-65-5, Safety of 1-Methyl-1H-1,2,3-triazole

Intermediate 18: 1-Methyl-1H-1,2,3-triazole-5-carbaldehydeThe title compound was prepared according to the patent application WO2008/135826. To a 50 mL 2-necked flask containing 1-methyl-1H-1,2,3-triazole (1.0 g, 12.0 mmol, prepared according to PCT Int. AppL 2008098104) was added THF (45 mL) and the colorless solution was cooled to -40 C. Then, n-BuLi (2.5 M in hexanes, 4.8 mL, 12.0 mmol) was added dropwise which afforded a dark reddish-brown viscous solution. The mixture was stirred between -30 to -20 C for 45 minutes, then neat DMF (3 mL, 38,5 mmol) was introduced at -10 C. The mixture was allowed to warm up to room temperature and stirred for 60 minutes, followed by pouring into water. The aqueous portion was extracted with EtOAc (4 x 50 mL) and the combined organics were washed with brine, dried over MgSO4, filtered and concentrated. The aqueous portion was back- extracted with DCM (3 x 50 mL) and dried as above. The combined organics were concentrated to give a light brown oil that was much more UV active than the starting material, TLC in either 25% CH3CN-DCM or 25% EtOAc-DCM showed the product to have a slightly higher Rf than the starting material. Chromatography on silica gel (100% DCM increasing to 25% CH3CN-DCM) provided the title compound as a colorless oil.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi, A.; BARBAY, Kent; EDWARDS, James, P.; KREUTTER, Kevin, D.; KUMMER, David, A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald, L.; WOODS, Craig, R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell, D.; WO2015/57206; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C2HBr2N3

A solution of 1.4 g (36 mmol) of sodium hydroxide in13 mL of water was added to a solution of 8.0 g (36 mmol) of 3,5-dibromo-1H-1,2,4-triazole (1) in100 mL of acetone. The two-phase system thus formed was stirred at 20 C until it became homogeneous, and 4.6 g (36 mmol) of dimethyl sulfate was added dropwise at such a rate that the temperature of the mixture did not exceed 40 C. The mixture was then refluxed for 2 h. The reaction was assumed to be complete when the mixture became weakly acidic and sodium methyl sulfate precipitated. The mixture was filtered,and the solvent was distilled off from the filtrate under reduced pressure. The residue was washed with water, and the precipitate was filtered off and recrystallized from hexane. Yield 7.8 g (88 %), mp 64-65 C [22]. IR spectrum, nu, cm-1: 2951, 1717, 1699, 1464, 1418,1391, 1354, 1275, 1250, 1115, 1016, 989, 712, 700. 1H NMR spectrum, delta, ppm: 3.87 s (3H, CH3). 13C NMR spectrum, deltaC, ppm: 37.4 (CH3), 131.3 (C3),139.1 (C5). Mass spectrum, m/z (Irel, %): 243 (51.1) [M]+, 241 (100) [M]+, 239 (48.9) [M]+, 229 (21.3), 227 (48.3), 225 (24.2), 218 (1.2), 200 (6.1), 198 (12.3), 196 (5.1), 162 (14.5), 160 (13.1), 136 (33.4), 134 (34.9), 122 (30.6), 120 (31.3), 119 (6.3), 117 (7.4), 108 (14.6), 107 (7.7), 106 (16.2), 105 (8.9), 93 (15.9), 91 (18.9), 81 (40.9), 79 (32.5), 52 (12.7), 43 (33.8), 41 (12.2), 40 (13.3), 39 (9.1), 38 (18.5), 29 (53.2), 28 (10.7), 27(16.3), 26 (8.2), 15 (60.3), 12 (7.4).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 7411-23-6, its application will become more common.

Reference:
Article; Tolstyakov; Russian Journal of Organic Chemistry; vol. 54; 10; (2018); p. 1537 – 1547; Zh. Org. Khim.; vol. 54; 10; (2018); p. 1525 – 1534,10;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 288-88-0, name is 1H-1,2,4-Triazole, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-88-0, Safety of 1H-1,2,4-Triazole

To a solution (3 ML) of 1,2,4-triazole (0.259 g, 3.75 mmol) in N,N-dimethylformamide was added small portions of sodium hydride (60% dispersion in oil, 0.12 g, 3.0 mmol) at about 20 C., and the mixture was stirred for about 3 hr until hydrogen was not generated.To a solution of sodium salt of 1,2,4-triazole thus obtained was added dropwise a solution (5.5 ML) of the total amount of (2R,3R)-3-(2′,4′-difluorophenyl)-3,4-epoxy-2-methanesulfonyoxybutane obtained above in N,N-dimethylformamide at room temperature.The mixture was stirred at 75-80 C. for 1.5 hr.The reaction mixture was added dropwise to water (20 ML), and the mixture was extracted 3 times with ethyl acetate (20 ML).The extracted ethyl acetate layers were mixed, and the mixture was washed twice with saturated brine (10 ML) and dried over anhydrous magnesium sulfate.After filtration, the filtrate (ethyl acetate solution) was concentrated and the obtained concentrate was subjected to silica gel column chromatography (SiO2, 5 g) and eluted with n-heptane-ethyl acetate (10:1)ethyl acetate.The objective fraction was concentrated to give a pale-yellow oil (0.297 g).The obtained pale-yellow oil was crystallized from a mixed solvent of ethyl acetate (1 ML)-n-heptane (4 ML) to give the title compound (0.185 g, yield from (2R)-2′,4′-difluoro-2-hydroxypropiophenone: 44%).As a result of analysis by HPLC, the optical purity was 100% e.e.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Sumika Fine Chemicals Co., Ltd.; US2003/236419; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 1455-77-2, A common heterocyclic compound, 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, molecular formula is C2H5N5, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Included at room temperature3,5-diamino-1,2,4-triazole 15.0 g (0.151 mol)And dehydrated N,N-dimethylformamide 100mLAdd 28percent to the suspensionSodium methoxide methanol solution 29.2g (0.151mol)After making a uniform solution and stirring for 30 minutes,30.1 g (0.151 mol) of 3-chloropropyltrimethoxydecane was added.Stir at 77~80 ¡ã C for 4 hours.After cooling the suspension reaction solution to 3 ¡ã C,Filter out insoluble matter,And the solvent of the filtrate is distilled off under reduced pressure,Obtained 35.7 g (0.137 mol, brown viscous,Yield 90.5percent).

The synthetic route of 1455-77-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SHIKOKU CHEMICALS CORPORATION; MURAI,, TAKAYUKI; TANIOKA, MIYA; IIDA, SHUSAKU; KATSUMURA, MASATO; YAMAJI, NORIAKI; IMAMINE, TAKAHITO; TSUJINO, MASAHIKO; HIRAO, HIROHIKO; (52 pag.)TW2018/41929; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics