Day: April 29, 2021

Reference of 956317-36-5, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 956317-36-5 as follows.

A round-bottom flask equipped with a magnetic stirrer bar was charged with CH2C12(70 mL) and 5-methyl-2-(2H-1,2,3-triazole-2-yl)benzoic acid (2.Og, 9.4 mmol, 1 equiv).To the clear solution, pentafluoro phenol (1.72 g, 9.4 mmol, 1 equiv) and EDChydrochloride (1.79 g, 9.4 mmol, 1 equiv) were successively added. After addition ofDMAP (0.23 g, 1.9 mmol, 0.2 equiv), the clear solution was stirred at room temperature for 2 h. The reaction mixture was evaporated to dryness under reduced pressure and purified by column chromatography (Si02, cyclohexane/ethyl acetate 9: 1), yielding perfluorophenyl 5-methyl-2-(2H-1,2,3-triazole-2-yl)benzoate (2.5 g, 72 %) as a colorlesspowder.?H NMR (500 MHz, CDC13) oe = 7.83 (s, 2H), 7.78 (d, J = 8.20 Hz, 1H), 7.76 (d, J = 1.40, 1H), 7.54 (dd, J = 1.40, 8.25 Hz, 1H), 2.51 (s, 3H)?3C NMR (125 MHz, CDC13) oe = 162.8, 139.2, 136.6, 136.1, 134.0, 131.1, 124.6, 123.6, 21.1 (CM omitted due to low intensity)?9F NMR (470 MHz, CDC13) oe = -151.2 (m), -157.8 (t, J = 21.7 Hz), -162.3 (m)

According to the analysis of related databases, 956317-36-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SANDOZ AG; HOeFERL-PRANTZ, Kathrin; BARTH, Roland; RICHTER, Frank; ZUPANCIC, Borut; (126 pag.)WO2016/20403; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 7170-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below.

((2S,3S)-3-(((benzyloxy)carbonyl)amino)-1-(2,4-dimethoxybenzyl)-4-oxoazetidin-2-yl)methyl methanesulfonate (3.74 g, 8.0 mmol), 3-methyl-1H-1,2,4-triazole (2.00 g, 24.0 mmol), K2CO3 (6.64 g, 48.0 mmol) and NaI (2.88 g, 17.2 mmol) were slurried in DMF (16 mL) and heated to 70 C. with stirring. After 24 h the mixture was concentrated in vacuo. The crude residue was purified via silica gel chromatography (MeOH-DCM, 2%) to afford title compounds (1.64 g, 44% combined) as an off-white solid (unseperable mixture). LCMS: m/z=466.2 (M+1).

The synthetic route of 3-Methyl-1H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NOVARTIS AG; AULAKH, Virender Singh; CASAREZ, Anthony; LIN, Xiaodong; LINDVALL, Mika; MCENROE, Glenn; MOSER, Heinz Ernst; RECK, Folkert; TJANDRA, Meiliana; SIMMONS, Robert Lowell; YIFRU, Aregahegn; ZHU, Qingming; US2015/266867; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 4928-87-4, A common heterocyclic compound, 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Single crystals of 1 were prepared by a branched tube method [13], 1H-1,2,4-triazole-3-carboxylic acid (0.117 g, 1 mmol), lead(II) nitrate (0.331 g, 1 mmol) and potassium bromide (0.119 g, 1 mmol) were placed in the bottom main of a branched tube. Water was carefully added to fill both arms, and then the arm to be heated was placed in oil bath at 60 C. After 3 days, colorless crystals were deposited in the cooler arm which were filtered off, washed with water and air dried. (0.225 g, yield 54%), m.p. ?195 C. (Found C 8.55, H 0.99, N 10.43%. calculated for C3H4BrN3O3Pb; C 8.63, H 0.96, N 10.07%). IR (cm-1) selected bands: 464 (s), 651 (s), 1100 (s), 1303 (m), 1370 (m), 1457 (vs), 1606 (s) and 3370 (br).

The synthetic route of 4928-87-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Safarifard, Vahid; Morsali, Ali; Joo, Sang Woo; Ultrasonics Sonochemistry; vol. 20; 5; (2013); p. 1254 – 1260;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7170-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 8 In a sealed tube dicarbonyl intermediate 10 (50 mg, 0.13 mmol), 3-methyl-1,2,4-triazole (52 mg, 0.75 mmol) and copper powder (16 mg, 0.25 mmol) were combined and heated at 140 C. with microwaves for 1 h. The reaction was diluted with MeOH (3 mL), filtered through celite and the filtrate was purified by preparative HPLC to yield 16 (3 mg, 0.007 mmol, 5%) as a yellow solid. 1H NMR: (500 MHz, CD3OD) delta 8.97 (s, 1H), 8.61 (s, 1H), 8.28 (s, 1H), 8.27 (s, 1H), 7.52-7.40 (m, 5H), 4.02-3.44 (m, 8H); LC/MS: (ES+) m/z (M+H)+=431; HPLC Rt=0.82 min., column G, conditions B.

The synthetic route of 3-Methyl-1H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bender, John A.; Yang, Zhong; Kadow, John F.; Meanwell, Nicholas A.; US2005/124623; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, A new synthetic method of this compound is introduced below., Quality Control of 3,5-Dibromo-1H-1,2,4-triazole

In a 50 mL round bottomed flask, 3,5-dibromo-1H-1,2,4-triazole (Int-1, 1.50 g, 6.61 mmol) was dissolved in DMF (15 mL) and the solution was cooled to 0-5 C (ice bath). Sodium hydride (55% dispersion in mineral oil, 317 mg, 7.93 mmol) was added in portions and the resulting mixture was stirred for 30 min at 0-5 C and for 15 min at room temperature. After that, 1- fluoro-2-iodoethane (1.15 g, 537 mu, 6.61 mmol) was added dropwise at room temperature. The resulting mixture was stirred for 18 h at room temperature. After that, it was concentrated in vacuo, the residue was purified by column chromatography (silica gel, 70 g, eluting with ethyl acetate / n-heptane, gradient 0: 100 to 40:60 v/v) to yield the title compound as yellow oil (1.51 g, 84%). 1H NMR (CDCl3, 300 MHz): delta 4.46 (td, J = 4.7, 24.2 Hz, 2 H), 4.80 (td, J = 4.7, 46.3 Hz, 2 H). MS (ES+) m/z 271.9, 273.9, 275.9 [M+H, 2 Br isotopes].

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; BERCHTOLD, Stefan; GALLEY, Guido; GOERGLER, Annick; JAKOB-ROETNE, Roland; KRUMMENACHER, Daniela; LIMBERG, Anja; NEIDHART, Werner; RATNI, Hasane; REUTLINGER, Michael; RODRIGUEZ SARMIENTO, Rosa Maria; SCHNIDER, Christian; (309 pag.)WO2018/87018; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 151899-62-6, name is 3-Iodo-1-trityl-1H-1,2,4-triazole, A new synthetic method of this compound is introduced below., Quality Control of 3-Iodo-1-trityl-1H-1,2,4-triazole

Nitrogen gas was bubbled through a solution of 3-iodo-l-trityl-lH-l,2,4-triazole (37.3g, 85.35mmol), and triethylamine (17.8ml, 128mmol) in anhydrous DMF (300ml) heated at 350C for 30 mins. Pd(PPh3)2Cl2 (2Ag, 3.4mmol) and CuI (651mg, 3.4mmol) were added followed by addition of ethynyltrimethylsilane (18ml, 128mmol) in anhydrous DMF (18ml) over 5 15 hours via syringe pump. After complete addition the mixture was heated at 350C for a further 5 hours. The mixture was poured into water (700ml) and extracted with EtOAc (3 x 300ml). Combined EtOAc layers washed with water (2 x 500ml), sat. NaCl (250ml), dried over Na2SO4, filtered and evaporated. The residue was purified by MPLC on silica gel eluting with a gradient from 100% hexanes to 10% EtOAc in hexanes to afford the title compound. 1HNMR (500 MHz, 10 CDCl3) delta: 7.96 (s, IH), 7.37 (m, 9H), 7.14 (m, 6H), 0.27 (s, 9H).

The synthetic route of 151899-62-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK & CO., INC.; WO2008/57336; (2008); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 584-13-4, name is 4H-1,2,4-Triazol-4-amine, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 584-13-4, Quality Control of 4H-1,2,4-Triazol-4-amine

General procedure: 4-Carboxybenzenesulphonamide (10.0mmol), 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDCI, 12.0mmol), and 1-hydroxybenzotriazole (HOBt, 12.0mmol) were added to 10mLN,N-dimethylformamide (DMF) and stirred at room temperature (20-25C) for 30min. Then, 2-amino-4-ethoxycarbonyl thiazole (12.0mmol) and 4-dimethylaminopyridine (DMAP, 3.0mmol) were added to the solution. The reaction was carried out at 45C for 24h. The mixture was cooled to room temperature and extracted with ethyl acetate (EtOAc). The combined organic layers were washed with brine, dried over anhydrous Na2SO4, filtered, and concentrated under reduced pressure. The crude product was purified by column chromatography (dichloromethane/methanol, 60:1-30:1) to recover compound 2a. The method for synthesising 2b-3f was the same as for 2a.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4H-1,2,4-Triazol-4-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Cheng, Yunyun; Feng, Yan; He, Xinhua; Li, Zhenwang; Sun, Xianyu; Wang, Jing; Yang, Chaofu; Yang, Xu; Zhang, Jiwen; Zhao, Wangyu; Zhuang, Xiaomei; Bioorganic Chemistry; vol. 100; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 288-36-8, name is 1H-1,2,3-Triazole, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C2H3N3

Method B: 2-Fluoro-6-[1 ,2,3]triazol-2-yl-benzoic acid. To a 2 L, 3- necked, round-bottomed flask equipped with an overhead mechanical stirrer, thermocouple probe, heating mantle, reflux condenser, and nitrogen inlet were added 2-fluoro-6-iodobenzoic acid (127.6 g, 480 mmol), copper iodide (4.57 g, 24 mmol), and Cs2C03 (312.6 g, 959 mmol). To these solids were added dioxane (640 mL), then water (2.6 mL, 144 mmol), then 1 H-1 ,2,3-triazole (55.6 mL, 959 mmol), and finally frans-1 ,2-dimethylcyclohexane-1 ,2-diamine (15.1 mL, 96 mmol). The mixture was then warmed to 60 C for 30 min, then to 83 C for 30 min, and then to 100 C for 3 h. After the 3 h at 100 C, the mixture was cooled and then 1 L of MTBE and 1 L of water were added. After vigorous mixing, the layers were separated and the bottom aqueous layer was acidified to pH 1 .72 with -148 mL of concentrated hydrochloric acid. The aqueous was then extracted twice with EtOAc. The combined organic layers were dried over Na2S04, filtered, and concentrated to provide a dark oil. The oil was stirred overnight in EtOAc (450 mL) and the resulting precipitate was removed by filtration. The mother-liquors were concentrated to a brown solid (106.21 g, 75 wt% by quantitative HPLC, 79.7 g, 80%). 1H NMR (400 MHz, DMSO-d6): 8.22 – 8.13 (bs, 2H), 7.84-7.80 (m, 1 H), 7.74 – 7.65 (m, 1 H), 7.50 – 7.41 (m, 1 H).

According to the analysis of related databases, 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LETAVIC, Michael; RUDOLPH, Dale, A.; SAVALL, Brad, M.; SHIREMAN, Brock, T.; SWANSON, Devin; WO2012/145581; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 202931-88-2, name is 1-Methyl-1H-1,2,3-triazole-5-carbaldehyde, A new synthetic method of this compound is introduced below., name: 1-Methyl-1H-1,2,3-triazole-5-carbaldehyde

To a flask containing 6-bromo-4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinoline (1.45 g, 3.37 mmol, Intermediate 10: step d) was added THF (25 mL) and the solution was cooled to -75 C. n-BuLi (2.5 M in hexanes, 1.3 mL, 3.25 mmol) was added dropwise. After 2 minutes, 1-methyl-1H-1,2,3-triazole-5-carbaldehyde (580 mg, 5.22 mmol, Intermediate 18) in 3 mL THF was introduced. The reaction mixture was allowed to warm to -20 C. over 45 minutes at which time the reaction was quenched with aqueous NH4Cl solution. The aqueous portion was extracted with EtOAc (5*40 mL) and the combined organics were washed with brine, dried over MgSO4, filtered and concentrated. Chromatography on silica gel (5% CH3CN-DCM increasing to 30% CH3CN +2% MeOH) afforded the title compound as an off white amorphous solid. 1H NMR (600 MHz, CDCl3) delta 8.15 (d, J=1.9 Hz, 1H), 7.82 (d, J=8.6 Hz, 1H), 7.54 (dd, J=8.6, 2.0 Hz, 1H), 7.49 (d, J=8.2 Hz, 2H), 7.38 (d, J=8.1 Hz, 2H), 7.27 (s, 1H), 6.14 (d, J=4.6 Hz, 1H), 5.01 (s, 1H), 4.33 (s, 2H), 4.07 (s, 3H), 3.95 (s, 3H). MS (ESI): mass calcd. for C22H18ClF3N4O2, 462.1, m/z found 463.1 [M+H]+.

The synthetic route of 202931-88-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; US2015/105372; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 41253-21-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 41253-21-8 name is Sodium 1,2,4-triazol-1-ide, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Compound 271Synthesis of N-(5-(1H-1,2,4-triazol-1-yl)-2-(3,4,5-trimethoxybenzoyl)phenyl)acetamide; As shown in Reaction 1, first, magnesium was added to 1-bromo-3,4,5-trimethoxybenzene as a starting material. Then, Compound (VII) derivative was added thereto to obtain a compound [N-(5-fluoro-2-(3,4,5-trimethoxybenzoyl)phenyl)acetamide. Thus obtained compound [N-(5-fluoro-2-(3,4,5-trimethoxybenzoyl)phenyl)acetamide] (36.2 mg, 0.1 mmol) was dissolved in DMF (2 ml), and 1,2,4-triazole.Na (28.5 mg) was added thereto at room temperature. The mixture was heated with stirring for 2 hours. After completion of the reaction, the reaction mixture was cooled to room temperature and diluted with an EtOAc solution. The organic layer was washed with water, and brine. The extracted organic layer was dried over anhydrous MgSO4, and the solid substance was filtered off. The remaining solvent was removed by vacuum evaporation. The resulting residue was purified by column chromatography (SiO2, n-Hex/EA=2/1?1/1) to obtain Compound 271 (25.6 mg, 65%).1H NMR (CDCl3) delta 10.812 (s, 1H), 9.077 (s, 1H), 8.788 (s, 1H), 8.144 (s, 1H), 7.767 (d, J=8.36 Hz, 1H), 7.564 (d, J=8.52 Hz, 1H), 6.956 (s, 2H), 3.954 (s, 3H), 3.879 (s, 6H), 2.264 (s, 3H). MS (ESI) m/z 397 (M++H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Sodium 1,2,4-triazol-1-ide, and friends who are interested can also refer to it.

Reference:
Patent; CHONG KUN DANG PHARMACEUTICAL CORP.; US2009/275575; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics