Day: June 3, 2021

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 1H-1,2,3-Triazole

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1 ,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dirnethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to rt, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 50% EtOAc in water with 0.1% TFA) to give the desired A-3. A portion of this acid (0.1 1 g, 0.53 mmol) was treated with thionyl chloride (0.59 g, 5.3 mmol) in dichloromethane (5.0 mL) at rt. After stirring at RT for 1 h, the mixture was concentrated, azeotroping with benzene to yield acid chloride A-3.

If you are hungry for even more, make sure to check my other article about 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MERCK & CO., INC.; WO2009/11775; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 81606-79-3, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 81606-79-3, name is 2-(1,2,4-Triazol-1-yl)acetonitrile, molecular formula is C4H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Following the procedure in Example 8 and substituting N-((2S,3R)-l-(((S)-3-(3- formylphenoxy)- 1 -((4-methylbenzyl)amino)- 1 -oxopropan-2-yl)amino)-3-hydroxy- 1 -oxobutan-2- yl)-5-methylisoxazole-3-carboxamide for N-((2S,3R)- 1 -(((S)- 1 -((2-fluoro-4- methylbenzyl)amino)-3-(3-formylphenoxy)-l-oxopropan-2-yl)amino)-3-hydroxy- l-oxobutan-2- yl)-5-methylisoxazole-3-carboxamide afforded the title compound. LC-MS (ES, m/z): 613 [M+H].

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 2-(1,2,4-Triazol-1-yl)acetonitrile.

Reference:
Patent; BRAMELD Kenneth; OWENS Timothy; WO2015/195950; A1; (2015);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C2H3N3

Step 1) Synthesis of 5-methyl-2- (2H-1, 2, 3-triazol-2-yl) benzoic acid To a solution of N, N-dimethylformamide (30 mL) were added sequentially 2H-1, 2, 3-triazole (3.45 g, 50 mmol) , 2-iodo-5-methyl benzoic acid (5.24 g, 20 mmol) , cesium carbonate (11.72 g, 36 mmol) , trans-N, N’-dimethyl-1, 2-cyclohexanediamine (0.51 g, 3.6 mmol) and cuprous iodide (0.38 g, 2 mmol) . The reaction was heated to 100 ? under N2. After reaction for 4 hours, the reaction mixture was cooled to rt, diluted with water (60 mL) and extracted with ethyl acetate (200 mL × 2) . The aqueous layer was acidified to pH 1 to 2 with concentrated hydrochloric acid, and then extracted with ethyl acetate (200 mL × 2) . The combined organic layers were dried over anhydrous sodium sulfate, and filtered. The filtrate was concentrated in vacuo and the residue was purified by silica gel column chromatography (DCM/methanol (v/v) =50/1) to give the title compound as a yellow solid (2.76 g, 68 %) .MS (ESI, neg. ion) m/z: 202.1 [M-H] -;1H NMR (CD3OD, 600 MHz) d (ppm) : 7.88 (s, 2H) , 7.66 (d, 1H) , 7.59 (d, J= 8.2 Hz, 1H) , 7.50-7.48 (dd, J = 8.1 Hz, 1.1 Hz, 1H) , 2.45 (s, 3H) ; and13C NMR (CD3OD, 151 MHz) d (ppm) : 169.8, 140.7, 137.5, 136.7, 133.5, 131.5, 129.3, 126.0, 21.0.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 288-36-8, and we look forward to future research findings.

Reference:
Patent; SUNSHINE LAKE PHARMA CO., LTD.; ZHANG, Yingjun; JIN, Chuanfei; ZHANG, Ji; (90 pag.)WO2017/88759; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 4922-98-9, name is 5-Phenyl-1H-1,2,4-triazol-3-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C8H8N4

General procedure: 3-Amino-1,2,4-triazole 8a?f (1.0 mmol), o-hydroxybenzaldehyde9a?e (1.0 mmol), acetone (10) (0.22 ml,3.0 mmol), and abs. EtOH (2 ml) were mixed in amicrowave process vial, and then 4 N solution of HCl indioxane (0.07 ml, 0.3 mmol) was added. The mixture wasirradiated at 150°C for 30 min. The reaction mixture wascooled by an air flow and stirred for 24 h at roomtemperature for complete precipitation of the product. Theprecipitate was filtered off, washed with EtOH (1 ml) andEt2O (3×1 ml), and dried. Compounds 1a?w were obtainedin a form of white solids.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 4922-98-9, and we look forward to future research findings.

Reference:
Article; Guemue?, Mustafa K.; Gorobets, Nikolay Yu.; Sedash, Yuriy V.; Chebanov, Valentin A.; Desenko, Sergey M.; Chemistry of Heterocyclic Compounds; vol. 53; 11; (2017); p. 1261 – 1267; Khim. Geterotsikl. Soedin.; vol. 53; 11; (2017); p. 1261 – 1267,7;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 1533519-84-4, name is 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C15H13N3S

Example 10. Preparation of phenyl 2-((4-(4-cyclopropylnaphthalen-l-yl)-4H-l,2,4-triazol-3-yl)thio)acetate [075] To a round bottom flask added 4-(4-cyclopropyl-l-yl)-4H-l,2,4-triazole-3-thiophenol (40.0 g), acetone (600 mL) and triethylamine (16.6 g) to form a mixture at room temperature, after stirred for 20 min, the mixture was cooled to 0C, then was added drop wise a solution of phenyl chloroacetate in isopropanol (33.8 g of phenyl chloroacetate was dissolved in 200 mL of acetone), during the addiction the mixture was maintained at about 0C, after the addition, the mixture was warm to 20C, after stirred for about 2 hours, the reaction was complete, filtered, and the filter cake was washed with acetone (100 mL), after filtration, the filter cake was added purified water (700 mL) to give a slurry, the slurry was stirred for 1 hour, then the purified water was removed by vacuum filtration, the filter cake was dried in vacuum at about 50C for about 24 hours to obtain phenyl 2-((4-(4-cyclopropylnaphthalen-l-yl)-4H-l,2,4-triazol-3-yl)thio)acetate, yield 90% the HPLC purity(area) 99.2%.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione help many people in the next few years.

Reference:
Patent; SUNSHINE LAKE PHARMA CO., LTD.; CHEN, Weiqiang; LUO, Jian; LIU, Lixue; FAN, Yuping; WO2014/198241; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 15988-11-1, name is 4-Phenyl-1,2,4-triazolidine-3,5-dione belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 4-Phenyl-1,2,4-triazolidine-3,5-dione

General procedure: Dimedone (0.14 g, 1 mmol), benzaldehyde (0.1 g, 1 mmol), and 4-phenylurazole (0.177 g, 1 mmol) were mixed with PEG-SO3H (0.6 g, 0.1 mmol) and the obtained mixture was stirred magnetically at 80 C for 40 min. After the completion of the reaction warm water (20 mL) was added and the mixture stirred for about 5 min. The insoluble crude product was filtered and recrystallized from EtOH/H2O 4:1 and the pure product was obtained (0.352 g, 91%). In order to recover the catalyst, the filtrate was dried under reduced pressure and recovered catalyst was washed with diethyl ether and reused after drying under reduced pressure. The equivalent procedure was used for the synthesis of triazolo[1,2-a]indazole-tetraones.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 15988-11-1.

Reference:
Article; Hasaninejad, Alireza; Zare, Abdolkarim; Shekouhy, Mohsen; Tetrahedron; vol. 67; 2; (2011); p. 390 – 400;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

Step A: 6-methyl-3-(2H-1,2,3-triazol-2-yl)picolinonitrile To 3-bromo-5-methylpicolinonitrile (2.2 g, 11 mmol) in DMF (28 mL) was added K2CO3 (1.7 g, 12 mmol) and 2H-1,2,3-triazole (650 muL, 11 mmol). The mixture was heated to 100 C. for 36 h, cooled to rt and extracted with EtOAc. The combined organics were dried (Na2SO4) and concentrated. Purification via silica gel chromatography (10-100% EtOAc in hexanes) gave the title compound (1 g, 48%).

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 288-36-8, and we look forward to future research findings.

Reference:
Patent; Janssen Pharmaceutica NV; GELIN, Christine F.; LEBOLD, Terry P.; SHIREMAN, Brock T.; US2014/275118; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C9H7N3O

A mixture of beta ionone (0.48 g, 0.507 ml, 2.5 mmol), 4-(1H-1,2,4-triazol-1-yl) benzaldehydes (0.346 g, 2 mmol), cetyltrimethyl ammonium bromide (0.028 g, 0.20 mmol), sodium hydroxide (0.240 g, 6 mmol) and water (10 ml) was stirred at room temperature for 24 h. Reaction progress was monitored by TLC and compound was extracted with ethyl acetate (2 × 30 ml). The combined organic extract was washed with water (2 × 30 ml), brine solution (25 ml), dried (Na2SO4) and the solvent was removed in vacuum. The crude product was purified by column chromatography (SiO2, 60-120 mesh). Elution with 10 % ethyl acetate in hexane furnished a yellow coloured solid (0.164 g, 24%). Mp: 103-104OC; IR (KBr, cm-1): 2929, 1643 (C=O), 1590 (C=N); 1H NMR (CDCl3, 300 MHz): delta 1.05 (s, 6 H, CH3-8? and CH3-9?), 1.41-1.45 (m, 2H, CH2-5?), 1.55-1.61 (m, 2H, CH2-4?), 1.77 (s, 3H, CH3-7?), 2.04 (t, J = 6 Hz, 2 H, H-3?), 6.42 (d, J = 16 Hz, 1H, H-4), 6.96 (d, J = 16 Hz, 1H, H-2), 7.48 (d, J = 16 Hz, 1H, H-5), 7.61 (d, J = 16 Hz, 1H, H-1), 7.67 (brs, 4H, H-2?, H-3?, H-5? and H-6?), 8.06 (s, 1H, H-3???), 8.55 (s, 1H, H-5???); 13C NMR (CDCl3, 75 MHz): delta 18.86, 21.89, 2×28.87, 33.76, 34.18, 39.85, 2×120.08, 126.64, 129.35, 2×129.63, 134.87, 136.50, 137.26, 137.89, 140.69, 140.82, 143.54, 152.78, 188.66; ESI-MS m/z: 348 [M+1]+; Analysis calculated for C22H25N3O: C, 76.05; H, 7.25; N, 12.09; Found: C, 76.10; H, 7.19; N, 12.11.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 27996-86-7

Reference:
Article; Suryawanshi; Tiwari, Avinash; Kumar, Santosh; Shivahare, Rahul; Mittal, Monika; Kant, Padam; Gupta, Suman; Bioorganic and Medicinal Chemistry Letters; vol. 23; 10; (2013); p. 2925 – 2928;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 16681-65-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a 2-necked flask containing 1 -methyl-1 H-[1 ,2,3]triazole (162.91 mg; 1.96 mmol; 1.05 eq.) is added anhydrous THF (4.00 ml_) and the solution is cooled between -40 to -20C. To this colorless solution n-BuLi in hexane 1 .6M (1 .23 ml; 1 .96 mmol; 1 .05 eq.) is added dropwise. After stirring at 0C for 1 hour, a solution of pyridine-3-carbaldehyde (175.28 L; 1.87 mmol; 1 .00 eq.) in anhydrous THF (3.00 mL) is added and the reaction mixture is stirred for 3 h. After this time, RM is quenched by pouring into a saturated solution of NH4CI. Aqueous phase is extracted 3 times with n-BuOH. Organic layer is dried over Na2S04, filtered and concentrated in vacuo to obtain: (3-methyl- 3H-[1 ,2,3]triazol-4-yl)-pyridin-3-yl-methanol (243.00 mg; yield 66 %; 99 % by UPLC) is obtained as a beige oil.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1-Methyl-1H-1,2,3-triazole is helpful to your research.

Reference:
Patent; SELVITA S.A.; FABRITIUS, Charles-Henry Robert Yves; NOWAK, Mateusz Oktawian; WIKLIK, Katarzyna Anna; SABINIARZ, Aleksandra Barbara; BIE?, Marcin Dominik; BUDA, Anna Ma?gorzata; GUZIK, Pawel Szczepan; JAKUBIEC, Krzysztof Roman; MACIUSZEK, Monika; KWIECI?SKA, Katarzyna; TOMCZYK, Mateusz Micha?; GA??ZOWSKI, Micha? Miko?aj; GONDELA, Andrzej; DUDEK, ?ukasz Piotr; (681 pag.)WO2016/180536; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C2HBr2N3

a) 3 ,5-Dibromo- 1 -ethyl- 1 H-[ 1 ,2,4]triazole 3,5-Dibromo-lH-l,2,4-triazole (2.5 g, 11.0 mmol, Eq: 1.00) was dissolved in dimethyl- formamide (31.8 ml) and sodium hydride (529 mg, 60% dispersion in mineral oil, 13.2 mmol, Eq: 1.2) was added slowly. Ethyl methanesulfonate (2.74 g, 2.27 ml, 22.0 mmol, Eq: 2) was added to the reaction and the mixture was heated in a microwave oven for 60 minutes at 100 C. The mixture was diluted with water and extracted 3x with ethyl acetate. The organic layer was dried over magnesium sulfate, filtered and the solvent was evaporated to give 3,5-dibromo-l-ethyl-lH- [l,2,4]triazole (2.54 g, 90.4%) as a white powder. MS: m/z= 255.9 (M+H+)

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 3,5-Dibromo-1H-1,2,4-triazole help many people in the next few years.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; FLOHR, Alexander; GROEBKE ZBINDEN, Katrin; KUHN, Bernd; LERNER, Christian; RUDOLPH, Markus; SCHAFFHAUSER, Herve; WO2013/178572; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics