Day: June 15, 2021

Synthetic Route of 41253-21-8, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a solution of phenol 11a (200 mg, 0.441 mmol) and cesium carbonate (158 mg, 0.485 mmol) in DMF (10 mL) was added 1,2-dibromoethane (96 muL, 1.11 mmol). The resulting mixture was stirred at room temperature for 60 h. After dilution with water, the mixture was extracted with EtOAc. The organic layer was dried over anhydrous MgSO4, filtered and concentrated in vacuo. The residue was carried on to the next step without further purification.To a solution of the crude bromide in DMF (10 mL) was added 1,2,4-triazole sodium derivative (122 mg, 1.34 mmol). The mixture was stirred at room temperature for 15 h. After dilution with water, the mixture was extracted with EtOAc. The organic layer was dried over anhydrous MgSO4, filtered and concentrated in vacuo. The residue was purified using RP preparative HPLC to provide the titled compound 11g (78 mg, 33%, 2 steps). 1H NMR (400 MHz, DMSO-d6) delta 8.59 (s, 1H), 8.02 (s, 1H), 7.95 (s, 1H), 7.77-7.71 (m, 1H), 7.47 (s, 1H), 7.13 (s, 1H), 6.78 (d, J = 3.2 Hz, 1H), 6.62-6.58 (m, 1H), 5.02-4.92 (m, 2H), 4.71-4.35 (m, 8H), 3.71-3.61 (m, 1H), 3.49-3.41 (m, 1H), 3.38-3.15 (m, 5H); MH+ 549.

I am very proud of our efforts over the past few months and hope to Sodium 1,2,4-triazol-1-ide help many people in the next few years.

Reference:
Article; Lee, Suk Ho; Kim, Min Ju; Lee, Sung-Han; Kim, Jeongmin; Park, Hyun-Ju; Lee, Jinhwa; European Journal of Medicinal Chemistry; vol. 46; 7; (2011); p. 2662 – 2675;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C3H3N3O2

[0856] 3H-1,2,3-triazole-4-carboxylic acid (3.4 mg, 30f.tmol) was combined with HATU (11 mg, 30 f.tmol) in DMF(0.3 mL) and stirred at room temperature for 10 minutes;DIPEA (1 eq.) was added and the mixture was stirred for 1minute. Compound2 (lOmg, 30 f.tmol) inDMF (0.5 mL)wascombined with DIPEA (5.2 f.LL, 30 f.tmol), then added to theactivated acid solution. The resulting solution was stirred atroom temperature for 30 minutes; LC/MS showed the mass ofthe desired product. The solvent was removed in vacuo andthe crude residue was purified by reverse phase chromatographyto yield Compound a (8.5 mg) as a TFA salt. MS rn/z[M+Ht calc’d for C27H31ClFN50 4 , 544.21; found 545.2.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1H-[1,2,3]Triazole-4-carboxylic acid ,and how the biochemistry of the body works.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 288-36-8

To a solution of 5-fluoro-2-iodo- benzoic acid (3.86 g, 14.65 mmol), 2H-[1 ,2,3]triazole (2.5 g, 36.2 mmol),Cs2CO3 (8.62 g, 24.5 mmol), trans-N, N’-dimethyl-cyclohexane-1 ,2-diamine (0.4 ml_), Cul (244 mg) and DMF (13 ml_) were added to a microwave ready vessel and heated to 100 C for 10 min. The mixture was cooled, diluted with water, and extracted with EtOAc. The aqueous layer was acidified and extracted with EtOAc. The organic layer was dried over Na2SO and concentrated. The residue was purified by FCC (SiO2, gradient DCM to 10% MeOH/1 %HOAc/DCM) gave the product as a white powder, (2.14 g, 71 %). 1H NMR (400 MHz, CD3OD): 7.91 (s, 2H), 7.76 (dd, J = 8.9, 4.8 Hz, 1 H), 7.59 (dd, J = 8.5, 2.9 Hz, 1 H), 7.49 – 7.42 (m, 1 H).; Intermediate 53: 2-[1 ,2,3]Triazol-1 -yl-benzoic acid.The title compound was isolated from the synthesis of Intermediate 13. 1H NMR (400 MHz, CD3OD): 6.70 (d, J = 0.9 Hz, 1 H), 6.50 (dd, J = 7.7, 1 .5 Hz, 1 H), 6.30 (d, J = 1 .0 Hz, 1 H), 6.24.6.18 (m, 1 H), 6.17 -6.1 1 (m, 1 H), 6.01 (dd, J = 7.8, 1 .0 Hz, 1 H).

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 288-36-8

Reference:
Patent; JANSSEN PHARMACEUTICA NV; BRANSTETTER, Bryan, James; LETAVIC, Michael, A.; LY, Kiev, S.; RUDOLPH, Dale, A.; SAVALL, Brad, M.; SHAH, Chandravadan, R.; SHIREMAN, Brock, T.; WO2011/50200; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C2H3N3

Potassium carbonate (14.0 g, 101 .35 mmol) was added to solution of 2,3-dichloro-5- nitropyridine (10.0 g, 51 .82 mmol) in THF (60 mL) followed by addition of 2H-1 ,2,3-triazole (3.4 mL, 58.7 mmol). The resulting mixture was stirred at rt until reaction was deemed completed as judged by TLC (-16 h), then diluted with water (300 mL). The aqueous layer was extracted with EtOAc (2 x 300 mL), the organic layer was dried over sodium sulphate, filtered and (0326) concentrated under reduced pressure. The crude product was purified by column (0327) chromatography on silica (100-200 mesh), eluted at 20% EtOAc in p.ether which gave the title compound (7.0 g, 60%) as a solid with 99.42% LCMS purity. MS (ES+) 226.03 [M+H]+.

If you are hungry for even more, make sure to check my other article about 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MEDIVIR AB; ALBERTELLA, Mark; OeBERG, Fredrik; (96 pag.)WO2018/141749; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

General procedure: 20 mg of gamma-Fe2O3Ph-PMO-NaHSO4 was added to a roundbottomflask containing an aromatic aldehyde (1 mmol), 3-amino-1,2,4-triazole 2 (1.0 mmol), b-diketones (dimedone 3, 1,3-cyclohexadione 4 or ethyl acetoacetate 5) (1.0 mmol) and stirredunder solvent-free conditions at 100 C in certain times. Meanwhile,the progress of the reactionwas indicated by TLC (n-hexane:ethyl acetate; 7:3). With completing the reaction, 3ml ethanol waspoured and the magnetic nanocomposite was separated in thepresence of a magnetic stirring bar; the reaction mixture becameclear. The crude product was recrystallized from ethanol to give thepure product. The pure products were characterized by conventionalspectroscopic methods. Physical and spectral data for theselected compounds are represented below.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 61-82-5

Reference:
Article; Haghighat, Mahdieh; Shirini, Farhad; Golshekan, Mostafa; Journal of Molecular Structure; vol. 1171; (2018); p. 168 – 178;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 584-13-4, name is 4H-1,2,4-Triazol-4-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 584-13-4

General procedure: In a typical procedure, 3-arylimino-1,2,4-triazoles and 4-arylimino-1,2,4-triazoles 1-25 were synthesized by mixing 3-amino-1,2,4-triazole or 4-amino-1,2,4-triazole (2 mmol), substituted benzaldehydes (2 mmol) and H2SO4 (2 mL) in ethanol (15 mL). The mixtures were refluxed for 4-10 h, while progress of the reaction was monitored through thin layer chromatography. When reaction was completed, solvent was evaporated on a rotary evaporator under reduced pressure and residue was washed with hot hexane. Resulting compounds were crystallized by ethanol to give title compounds in moderate to good yields.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 584-13-4.

Reference:
Article; Khan, Khalid Mohammed; Siddiqui, Salman; Saleem, Muhammad; Taha, Muhammad; Saad, Syed Muhammad; Perveen, Shahnaz; Choudhary, M. Iqbal; Bioorganic and Medicinal Chemistry; vol. 22; 22; (2014); p. 6509 – 6514;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 1H-1,2,4-Triazole

To a solution (3 ML) of 1,2,4-triazole (0.259 g, 3.75 mmol) in N,N-dimethylformamide was added small portions of sodium hydride (60% dispersion in oil, 0.12 g, 3.0 mmol) at about 20 C., and the mixture was stirred for about 3 hr until hydrogen was not generated.To a solution of sodium salt of 1,2,4-triazole thus obtained was added dropwise a solution (5.5 ML) of the total amount of (2R,3R)-3-(2′,4′-difluorophenyl)-3,4-epoxy-2-methanesulfonyoxybutane obtained above in N,N-dimethylformamide at room temperature.The mixture was stirred at 75-80 C. for 1.5 hr.The reaction mixture was added dropwise to water (20 ML), and the mixture was extracted 3 times with ethyl acetate (20 ML).The extracted ethyl acetate layers were mixed, and the mixture was washed twice with saturated brine (10 ML) and dried over anhydrous magnesium sulfate.After filtration, the filtrate (ethyl acetate solution) was concentrated and the obtained concentrate was subjected to silica gel column chromatography (SiO2, 5 g) and eluted with n-heptane-ethyl acetate (10:1)ethyl acetate.The objective fraction was concentrated to give a pale-yellow oil (0.297 g).The obtained pale-yellow oil was crystallized from a mixed solvent of ethyl acetate (1 ML)-n-heptane (4 ML) to give the title compound (0.185 g, yield from (2R)-2′,4′-difluoro-2-hydroxypropiophenone: 44%).As a result of analysis by HPLC, the optical purity was 100% e.e.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,4-Triazole, in my other articles.

Reference:
Patent; Sumika Fine Chemicals Co., Ltd.; US2003/236419; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

1,2,3-Triazole-4-carboxylic acid (0.0274 g, 0.242 mmol), DIPEA (169 muL, 969 mumol) and HATU (92 mg, 242 mumol) were combined in DMF (0.2 mL) and stirred for 5 minutes at room temperature. This was then combined with (2S,4R)-4-amino-5-biphenyl-4-yl-2-hydroxymethyl-2-methyl-pentanoic acid 2-piperidin-1-yl-ethyl ester (103 mg, 242 mumol), predissolved in DMF (0.2 mL) and DIPEA (0.5 eq.). The resulting mixture was stirred for 15 minutes and the reaction was quenched with AcOH. The product was purified by preparative HPLC and lyophilized to yield the title compound (40 mg; purity 95%). MS m/z [M+H]+ calc’d for C29H37N5O4, 520.28. found 520.4.

If you are hungry for even more, make sure to check my other article about 16681-70-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 16681-65-5, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Intermediate 52: step b 1-(4-(1-methyl-1H-1,2,3-triazole-5-carbonyl)piperidin-1-yl)ethanone A solution of i-memyl-lH-l ,2,3-triazole (0.28 g, 3.37 mmol) in dry THF (3 mL) was cooled in a -78 C bath and -butyllithium (2.5 M in hexanes, 1 .26 mL, 3.15 mmol) was added dropwise over a 20 minute period. The suspension was stirred in the cold bath for 30 minutes and then 1 – acetyl-A’-methoxy-N-methy}piperidine-4-carboxamide (0.74 g, 3.45 mmol, Intermediate 52: step a) dissolved in THF (3 mL) was added dropwise. The resulting suspension was stirred at -78 C for 5 minutes then warmed to 0 C and stirred for an additional 30 minutes. The mixture was warmed to room temperature and stirred for 2,5 hours then quenched with saturated aqueous NH4C . The aqueous mixture was extracted with EtOAc (2 x). The combined EtOAc extracts were dried over Na2S04, filtered, concentrated to dryness and chromatographed (EtOAc/DCM) to provide the title compound.

I am very proud of our efforts over the past few months and hope to 1-Methyl-1H-1,2,3-triazole help many people in the next few years.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 4320-91-6, name is 2H-1,2,3-Triazole-2-acetic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 2H-1,2,3-Triazole-2-acetic acid

A round bottom flask was charged with (2S,4R)-4-(4-fluorobenzyl)-N-(4-(4-fluorophenoxy)phenyl)pyrrolidine-2-carboxamide hydrochloride (150 mg, 0.37 mmole, 1 eq), prepared as in Reference 6, 2H-l,2,3-triazole-2-ylacetic acid (51 mg, 0.40 mmole, 1.1 eq), HATU (152 mg, 0.40 mmole, 1.1 eq) and DMF (1 mL). DIEA (195 muL, 1.11 mmole, 3 eq) was added and the mixture stirred at ambient temperature for 18 hours. The reaction mixture was partitioned between ethyl acetate and deionized water. The aqueous layer was separated and extracted twice with ethyl acetate. The combined organics were washed with 5% lithium chloride (3 x 5 mL), IN sodium bicarbonate (2 x 5 mL) and then deionized water (2 x 5 mL) and concentrated in vacuo. Product was purified from the residue via flash chromatography (silica, 5% MeOH, 95% EtOAc). Clean fractions were combined and concentrated in vacuo to afford Compound 50, (2S,4R)-l-(2-(2H-l,2,3-triazol-2- yl)acetyl)-4-(4-fluorobenzyl)-N-(4-(4-fluorophenoxy)phenyl)pyrrolidine-2- carboxamide (171 mg, 89% yield), as a white solid. Major isomer: 1H-NMR (400MHz, DMSO-D6): ? 9.97 (s, IH), 7.80 (s, 2H), 7.58-7.51 (m, 2H), 7.34-7.07 (m, 6H), 7.04-6.90 (m, 4H), 5.48 (q, 2H), 4.53-4.46 (m, IH), 3.85-3.76 (m, IH), 2.77-2.61 (m, 3H), 2.03-1.86 (m, 2H). MS (EI) for C28H25F2N5O3, found 517.9 (MH+).

If you are hungry for even more, make sure to check my other article about 4320-91-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; EXELIXIS, INC.; IBRAHIM, Mohamed, Abdulkader; JEONG, Joon, Won; JOHNSON, Henry William, Beecroft; KEARNEY, Patrick; LEAHY, James, W.; LEWIS, Gary, L.; NOGUCHI, Robin, Tammie; NUSS, John, M.; WO2010/45580; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics