Our Top Choice Compound: 7170-01-6

I am very proud of our efforts over the past few months and hope to 3-Methyl-1H-1,2,4-triazole help many people in the next few years.

Reference of 7170-01-6, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Procedure: A 500 mL round bottom flask was loaded with 4-methoxy-7-chloro-6-azaindole 2e (9.1 g, 50 mmol; dried in vacuo), potassium carbonate (13.8 g, 100 mmol, 2 eq.), copper powder (6.35 g, 100 mmol, 2 eq.), and 3-methyl-1,2,4-triazole (83 g, 1.0 mol, 20 eq.). The solid mixture was heated to melt at 170-175 C. (external oil bath temperature) under a gentle stream of anhydrous nitrogen for 12 h, by which time HPLC analysis indicated that the amount of the peak for the starting material had become 5-30% and the desired product peak becomes about 45% with isomeric by-product peak becomes 15%. As the reaction mixture cooled, MeOH (150 mL) was added slowly to the warm, stirred mixture. Upon cooling, the insoluble material (copper powder) was filtered through a Celite pad, and rinsed with methanol. The filtrate was concentrated in vacuo to a thick paste which was diluted with water (1 L) and extracted with EtOAc (3×150 mL). The EtOAc extracts were dried (MgSO4), filtered and concentrated to obtain about 8 g of crude residue which was crystallized by dissolving in hot CH3CN (50 mL), followed by diluting with water (100 mL) and cooling at 0 C. to collect 1.45 g (12.7%) of the title compound as white solid. The filtrate was purified by C-18 reverse phase silica gel (YMC ODS-A 75 mum) eluted with 15-30% CH3CN/H2O. Appropriate fractions were combined and the aqueous solution after removing CH3CN by rotary evaporator was lyophilized to give additional 1.15 g of the title compound 3-81. The crude aqueous layer was further extracted with EtOAc several times. The ethyl acetate extracts were dried (MgSO4), filtered, concentrated, and crystallized from MeOH to give additional 200 mg of the title compound 3-81. The total yield: 2.8 g (12.2 mmol, Y. 24.5%); MS m/z 230 (MH), HRMS (ESI) m/z calcd for C11H12N5O (M+H), 230.1042, found 230.1038 (Delta-1.7 ppm); 1H NMR (CDCl3) delta ppm 2.54 (3H, s, CH3), 4.05 (3H, s, OCH3), 6.73 (1H, s, H-3), 7.40 (1H, s, H-2), 7.56 (1H, s, H-5), 9.15 (1H, s, triazole-H-5); 13C NMR (CDCl3, 125.7 MHz) 8 ppm 14.2 (triazole-Me), 56.3 (OMe), 100.5 (C-3), 116.9 (C-5), 123.5, 127.2, 127.5 (C-2), 129.5 (C-7), 141.2 (C-5′), 149.5 (C-4), 161.8 (C-3′); Anal. Calcd for C11H11N5O: C 57.63; H 4.83; N 30.55, found C, 57.37, H, 4.64, N, 30.68. The structure was confirmed by a single X-ray crystallographic analysis using crystals obtained from C-18 column fractions. A portion of C-18 column fractions containing a mixture of the desired 3-methyl-1,2,4-triazolyl analog 3-81 and isomeric 5-methyl-1,2,4-triazolyl analog 4-81 was further purified by C-18 reverse phase column eluting with 8-10% CH3CN/H2O. Appropriate fractions were extracted with CH2Cl2, and slow evaporation of the solvent gave crystalline material of the isomeric 7-(5-methyl-1,2,4-triazolyl)-4-methoxy-6-azaindole (4-81): MS m/z 230 (MH), 1H NMR (CDCl3) delta ppm 3.05 (3H, s, CH3), 4.07 (3H, s, OCH3), 6.74 (1H, q, J=2.4, H-2), 7.37 (1H, t, J=2.4, H-3), 7.65 (1H, s, H-5), 8.07 (1H, s, triazole-H-3). The structure was confirmed by a single X-ray crystallographic analysis.

I am very proud of our efforts over the past few months and hope to 3-Methyl-1H-1,2,4-triazole help many people in the next few years.

Reference:
Patent; Ueda, Yasutsugu; Connolly, Timothy P.; Kadow, John F.; Meanwell, Nicholas A.; Wang, Tao; Chen, Chung-Pin H.; Yeung, Kap-Sun; Zhang, Zhongxing; Leahy, David Kenneth; Pack, Shawn K.; Soundararajan, Nachimuthu; Sirard, Pierre; Levesque, Kathia; Thoraval, Dominique; US2005/209246; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Extended knowledge of 584-13-4

If you are hungry for even more, make sure to check my other article about 584-13-4, the application of this compound in the production field has become more and more popular.

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 584-13-4, name is 4H-1,2,4-Triazol-4-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 4H-1,2,4-Triazol-4-amine

General procedure: 4-Amino-1,2,4-triazole (0.005 mol) was taken in 150 mL beaker and dissolved in ethanol (10 mL). Equimolar amount of substituted benzaldehyde was added to the ethanolic solution. Then, 0.5 mL of glacial acetic acid was added dropwise to the reaction mixture and stirred with glass rod. The contents were irradiated in MW at 360W for required time with continuous monitoring by TLC. Then the reaction mixture was filtered. Crude product was recrystallized from ethanol to obtain pure compound. Same procedure was repeated but with different amount of catalysts, i.e., 0.75 mL and 1 mL. The progress of reaction was monitored by TLC after 10 s interval. On completion of reaction, resultant mass was filtered and recrystallized from ethanol. The same procedure was used for the synthesis of rest of the compounds. The work was continued by using different amounts of lemon juice as catalyst at 360 W for required time. 4-((4H-1,2,4-triazol-4-ylimino)methyl)phenol (I) IR (numax, KBr, cm-1): 3378 (O-H str.), 3107 (aromatic -C-H str.), 1665 (C=N str.), 1590 (N-N str.), 1607, 1567, 1507, 1475 (C=C str.), 1311 (O-H bending), 1275 (C-N str.), 1168 (C-O), 861 (C-N bending), 755 (C-H bending), and 771/cm (C=C bending); 1H NMR (DMSO-d6, 400 MHz, delta): delta 10.23 (s, 1H, OH), 8.98 (s, 2H, -CH=), 8.91 (s, IH, -CH=N-), 7.71-6.89 (m, 4H, Ar-H); 13C NMR (DMSO-d6, 100 MHz, delta): delta 159.3, 157.4, 148, 131.67, 126.13, 116.89; Analysis calculated for C9H8N4: C, 57.44; H, 4.25; N, 29.78. Found: C, 57.45; H, 4.26; N, 29.79.

If you are hungry for even more, make sure to check my other article about 584-13-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Mhaske, Sadhana D.; Takate, Sushama J.; Dhawale, Rhushikesh N.; Akolkar, Hemantkumar N.; Randhavane, Pratibha V.; Karale, Bhausaheb K.; Indian Journal of Heterocyclic Chemistry; vol. 27; 1; (2017); p. 89 – 97;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Brief introduction of 7411-23-6

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 3,5-Dibromo-1H-1,2,4-triazole ,and how the biochemistry of the body works.

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 7411-23-6

N-chloroethylmorpholine hydrochloride (197 mg, 1.32 mmol), 3,5-dibromo-1H-1,2,4-triazole (250 mg, 1.1 mmol) and potassium carbonate (456 mg, 3.3mmol) were added to DMF (5 mL) in a 25 mL round bottom flask. The reaction was then stirred at 50 C under nitrogen. The solvent was removed in vacuo, water was added, and the product extracted with DCM (3 ×). The organic phase was dried over a phase separator and the solvent removed in vacuo. The product was purified by silica column chromatography eluting with 0-10% MeOH in DCM to yield [4-[2-(3,5-dibromo-1,2,4-triazol-1-yl)ethyl]morpholine (374 mg, 1.1 mmol, 99% yield) ]. UPLC-MS (ES+, Method A), 0.65 min, m/z 341.0 [M+H]+

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 3,5-Dibromo-1H-1,2,4-triazole ,and how the biochemistry of the body works.

Reference:
Patent; REDX PHARMA PLC; JONES, Clifford, D.; BUNYARD, Peter; PITT, Gary; BYRNE, Liam; PESNOT, Thomas; GUISOT, Nicolas, E.S.; (318 pag.)WO2019/145729; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Something interesting about 1-Methyl-1H-1,2,3-triazole

If you are hungry for even more, make sure to check my other article about 16681-65-5, the application of this compound in the production field has become more and more popular.

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 16681-65-5

n-BuLi (1.23 M in hexanes, 447 muL, 0.55 mmol) was added dropwise to a stirred slurry of 1-methyl-1,2,3-triazole (46 mg, 0.55 mmol) in THF (1 mL) at -40 C. under nitrogen. After stirring for 30 minutes at -40 C., the mixture was treated dropwise with a solution of (2,4-dichloro-3-isopropoxyquinolin-6-yl)(1,2-dimethyl-1H-imidazol-5-yl)methanone (104 mg, 0.27 mmol, Intermediate 25) in THF (1 mL). The reaction was allowed to warm to room temperature over 1 hour. The reaction was then quenched with saturated aqueous NH4Cl. The mixture was poured into a separatory funnel and extracted with DCM (2*25 mL). The organics were combined, washed with brine, dried (Na2SO4), filtered and concentrated to dryness to afford an orange-brown foam. The crude material was purified by FCC (1-7.5% MeOH/DCM) followed by reverse-phase HPLC (acetonitrile/water+0.05% TFA) to provide the title compound as a clear colorless oil. 1H NMR (500 MHz, CDCl3) delta ppm 8.23-8.20 (m, 1H), 7.98 (d, J=8.8 Hz, 1H), 7.52-7.48 (m, 1H), 7.24 (s, 1H), 6.40 (s, 1H), 4.80-4.73 (m, 1H), 3.92 (s, 3H), 3.63 (s, 3H), 2.58 (s, 3H), 1.44-1.41 (m, 6H). MS (ESI): mass calcd. for C21H22Cl2N6O2, 460.1. m/z found, 461.1 [M+H]+.

If you are hungry for even more, make sure to check my other article about 16681-65-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

The Shocking Revelation of Related Products of 13273-53-5

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 4-Bromo-1-methyl-1H-1,2,3-triazole.

Related Products of 13273-53-5, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 13273-53-5, name is 4-Bromo-1-methyl-1H-1,2,3-triazole, molecular formula is C3H4BrN3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

In a microwave tube to a mixture of 3,3-dimethyl-6-(2-methylpyrimidin-5-yl)indolin-2-one (100 mg, 395 imol, Eq: 1.00, cf. Example 70 step c) and 4-bromo-1-methyl-1H-1,2,3-triazole (76.7 mg, 474 imol, Eq: 1.2) was added acetonitrile (3 ml). The solvent was degassed by bubbling nitrogen through the suspension for 10 minutes. Then was added at 22 C N,N?5 dimethylethylenediamine (6.96 mg, 8.5 jil, 79.0 imol, Eq: 0.2) followed by potassium carbonate(136 mg, 987 imol, Eq: 2.5) and copper (I) iodide (7.52 mg, 39.5 imol, Eq: 0.1). The tube was inerted, sealed and the mixture was heated in microwave at 170C for 30 minutes.The mixture was treated with 2 ml of water and extracted with ethyl acetate (2 x 2 ml). The organic layers were dried, filtered and concentrated in vacuo.The residue was purified by chromatography on silica gel to give the desired compound as a white solid (8 mg, 6%). MS (mlz) = 335.2 [M + H].

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 4-Bromo-1-methyl-1H-1,2,3-triazole.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; HILPERT, Hans; KOLCZEWSKI, Sabine; HUMM, Roland; STOLL, Theodor; MUSER, Thorsten; PLANCHER, Jean-Marc; GAUFRETEAU, Delphine; (142 pag.)WO2015/197567; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Our Top Choice Compound: 4928-87-4

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 4928-87-4

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 1,2,4-Triazole-3-carboxylic acid

To a reaction of 1/7-1, 2, 4-triazole-3 -carboxylic acid (100 mg, 0.87 mmol) and 4- Methoxy-3- (trifluoromethyl)benzylamine (200 mg, 0.97 mmol) in dry DMF (10 mL) was added 1- hydroxybenzotriazole monohydrate (146 mg, 0.97 mmol) and EDC (N-(3- Dimethylaminopropyl)-N’-ethylcarbodiimide) (186 mg, 0.97 mmol) followed by N- methylmorpholine (0.38 mL, 3.48 mmol via syringe). The mixture was stirred at room temperature under nitrogen and the solids were gradually dissolved. The contents were stirred at room temperature for 24.0 h, and then slowly diluted into iced water and extracted with DCM (2 x 50 mL). The DCM phase was washed with ice cold water (2 x 100 mL). The DCM phase was dried over anhydrous Na2S04, filtered and concentrated under reduced pressure and chromatographed on silica gel using EtOAc as eluents to get the desired amide 10 (62.8 mg, 24 % yield) as a white solid compound. -NMR (400 MHz, DMSO-de): <514.66 (br s, 1H), 9.23 (br s, 1H), 8.49 (br s, 1H), 7.60-7.58 (m, 2H), 7.22 (d, J= 8.4 Hz, 1H), 4.43 (d, J= 6 Hz, 2H), 3.86 (s, 3H); 19F -NMR (376 MHz, DMSO-de): <5 -60.82 ppm. MH+ = 301.4 m/z. The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 4928-87-4 Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; NATIONAL JEWISH HEALTH; WEMPE, Michael Fitzpatrick; VAZQUEZ-TORRES, Andres; DAI, Shaodong; (72 pag.)WO2020/41556; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Extended knowledge of 81606-79-3

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 81606-79-3.

Research speed reading in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 81606-79-3, name is 2-(1,2,4-Triazol-1-yl)acetonitrile belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C4H4N4

STR210 108 g (1 mole) of 1,2,4-triazol-1-yl-acetonitrile and 160 g (1.35 moles) of N,N-dimethylformamide dimethyl acetal are heated under reflux for 4 hours; the methanol formed is distilled off until the internal temperature has risen to 120 C.; the resulting residue is dissolved in 400 ml of ethanol, and 400 ml of a 20% strength ethanolic hydrogen chloride solution are added. The crystalline precipitate is filtered off with suction, rinsed with a little ethanol and dried on clay. 163 g (82% of theory) of 3-dimethylamino-2-(1,2,4-triazol-1-yl)-acrylonitrile hydrochloride of melting point 200-204 C. are obtained.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 81606-79-3.

Reference:
Patent; Bayer Aktiengesellschaft; US4614534; (1986); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Something interesting about 288-36-8

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1H-1,2,3-Triazole ,and how the biochemistry of the body works.

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C2H3N3

To a solution of 2,3-dichloro-5-nitropyridine (1.0g, 5.18 mmol) and K2CO3 (1.43 g, 10.4 mmol) inTHF (5 ml) was added 2H-1,2,3-triazole (0.360 ml, 6.22 mmol). The reaction mixture was stirredovernight at RT. Since the reaction was uncomplete, additional 2H-1,2,3-triazole (0.300 ml, 5.18mmol) was added and reaction mixture was stirred for 2 days at RT. Water was added and themixture was extracted with AcOEt. The organic layer was washed with brine, dried over Na2SO4,filtered and concentrated under vacuum. The residue was taken-up in DCM, the solid wasfiltered off and the filtrate was evaporated. The crude product was purified by flashchromatography on silica gel (cyclohexane/AcOEt: 1/0 to 7/3) to afford 3-chloro-5-nitro-2-(2H-1,2,3-triazol-2-yl)pyridine.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1H-1,2,3-Triazole ,and how the biochemistry of the body works.

Reference:
Article; Schlapbach, Achim; Revesz, Laszlo; Pissot Soldermann, Carole; Zoller, Thomas; Regnier, Catherine H.; Bornancin, Frederic; Radimerski, Thomas; Blank, Jutta; Schuffenhauer, Ansgar; Renatus, Martin; Erbel, Paulus; Melkko, Samu; Heng, Richard; Simic, Oliver; Endres, Ralf; Wartmann, Markus; Quancard, Jean; Bioorganic and Medicinal Chemistry Letters; vol. 28; 12; (2018); p. 2153 – 2158;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New downstream synthetic route of 103755-58-4

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 103755-58-4

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol

Methanesulfonyl chloride (0.30 g, 2.6 mmol) was added at 0 C to a solution of (1-phenyl-1H-1,2,3-triazol-4-yl)methanol (0.16 g, 0.87 mmol) and trimethylamine (0.38 mL, 2.6 mmol) in dichloromethane (10 mL). The mixture was stirred at 0 C for 45 min. The mixture was washed with water (20 mL). The organic layer was dried over with MgSO4, evaporated and purified by column chromatography (ethyl acetate/hexane, 1:1.2) on silica gel to yield compound 3 (0.15 g, 70%) as a white solid; m.p. 110-112 C. 1H NMR (300 MHz, CDCl3): delta = 8.15 (s, 1 H), 7.76-7.72 (m, 2 H), 7.58-7.45 (m, 3 H), 5.47 (s, 2 H), 3.09 (s, 3 H). 13C NMR (75 MHz, CDCl3): delta = 141.9, 136.8, 130.0, 129.4, 122.7, 120.8, 62.4, 38.5. HRMS (ESI): calcd. for C10H12N3O3S [M + H]+ 254.0599; found 254.0599.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 103755-58-4

Reference:
Article; Kwon, Young-Do; Son, Jeongmin; Yun, Mijin; Chun, Joong-Hyun; Tetrahedron Letters; vol. 59; 29; (2018); p. 2848 – 2852;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Continuously updated synthesis method about 15988-11-1

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 4-Phenyl-1,2,4-triazolidine-3,5-dione.

Electric Literature of 15988-11-1, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 15988-11-1, name is 4-Phenyl-1,2,4-triazolidine-3,5-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of dimedone (1 mmol), aldehyde or isatin (1 mmol) and 4-phenylurazole (1 mmol), and catalyst (0.01 g, 5 mol%) in water (5 mL) was refluxed. After completion of the reaction that was monitored by TLC (EtOAc:n-hexane, 1:3), the reaction mixture was cooled to room temperature. Then, the precipitated product was filtered and washed with water and cooled with ethanol to afford the pure product.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 4-Phenyl-1,2,4-triazolidine-3,5-dione.

Reference:
Article; Seyyedhamzeh, Mozhdeh; Shaabani, Shabnam; Hamidzad Sangachin, Mona; Shaabani, Ahmad; Research on Chemical Intermediates; vol. 42; 4; (2016); p. 2845 – 2855;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics