Day: June 29, 2021

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 27808-16-8

N-Bromosuccinimide (5.89 g, 33.1 mmol) was added to a solution of 4-methyl-1H-1,2,3-triazole (2.50 g, 30.1 mmol) in chloroform (30 mL), and the reaction mixture was stirred for 16 hours at room temperature (15 C.). It was then diluted with dichloromethane (100 mL), washed with water (2×100 mL), dried over sodium sulfate, filtered, and concentrated in vacuo to provide the product as a white solid (4.9 g), which was used directly in the next step.

If you are hungry for even more, make sure to check my other article about 27808-16-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Pfizer Inc.; Galatsis, Paul; Henderson, Jaclyn Louise; Kormos, Bethany Lyn; Kurumbail, Ravi G.; Reese, Matthew Richard; Stepan, Antonia Friederike; Verhoest, Patrick Robert; Wager, Travis T.; Pettersson, Martin Youngjin; Garnsey, Michelle Renee; (150 pag.)US2017/73343; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 13423-60-4, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 13423-60-4, name is 1-Phenyl-1H-1,2,4-triazole, molecular formula is C8H7N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

EXAMPLE 111 1-phenyl-4-(tetradec-1-yl)triazolium bromide 0.300 g (0.002 mol) 1-phenyltriazole 1 and 1.500 g (0.006 mol) 1-bromotetradecane 2 were dissolved in a pressure tube in 7 ml THF. The reaction mixture was stirred 4 d at 110 C. THF was removed because of the parallel positive experiences of solvent-free synthesis and the mixture stirred for 4 h at 110 C. To the obtained solid 10 ml petroleum ether was added. The product is filtered off, washed with petroleum ether, and dried in high vacuum. M 422.53 C22H36N3Br Yield: 0.4632 g (59%) 1H-NMR DM-108 (300 MHz/DMSO): (ppm)=0.86 (t, 3H, 20-H); 1.25 (m, 24H, 9-19-H); 1.94 (q, 2H, 8-H); 4.32 (t, 2H, 7-H); 7.70 (m, 3H, 5/5’/6H); 7.96 (d, 2H, 4/4′-H); 9.50 (s, 1H, 1-H); 10.97 (s, 1H, 2-H) 13C-NMR DM-108 (75.475 MHz/DMSO):

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 13423-60-4.

Reference:
Patent; TECHNISCHE UNIVERSITAET DRESDEN; US2011/105761; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 67545-00-0, name is 4-Amino-1-methyl-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 67545-00-0

In a microwave vial (35 mL) was added S-129 (0.78 g, 1.82 mmol), amine 11 (0.18 g, 1.82 mmol), Cs2CO3(1.18 g, 3.64 mmol.) and Dioxane (25 mL). The Argon was purged through septum and the reaction mixture was degassed for about 5 min. To this mixture was added Xantphos (103 mg, 0.2 mmol) followed by Pd2(dba)3(162 mg, 0.2 mmol) and purged with Argon again for 5 min. Vial was sealed with the septum and irradiated at 140 C for 3 h. After filtration, the obtained crude was chromatographed (Biotage, 25 g, eluent: DMC-EtOAc: 10-50%) to afford S-6-1 (390 mg, 44%).1H NMR (400 MHz, DMSO-d6): delta 9.61 (bs, 1H), 7.99 (d, J = 7.8 Hz, 1H), 7.46- 7.10 (m, 10H), 6.87 (d, J = 3.9 Hz, 1H), 5.39 (m, 1H), 4.02 (s, 3H), 3.35- 3.23 (m, 2H), 2.32 (s, 3H), 2.23 (m, 2H). FABMS (M+H) calculated for was 489.1815 found 489.1813. LCMS 99%, tR= 7.37 minutes.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 4-Amino-1-methyl-1,2,3-triazole, in my other articles.

Reference:
Patent; SOUTHERN RESEARCH INSTITUTE; AUGELLI-SZAFRAN, Corinne, E.; SUTO, Mark; GALEMMO, Robert; MOUKHA-CHAFIQ, Omar; GUPTA, Vandana; ANANTHAN, Subramaniam; (254 pag.)WO2017/106771; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 118863-62-0, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 118863-62-0, name is 3-(4-Bromophenyl)-1H-[1,2,4]triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of ethyl 4-(4,4,5,5-tetramethyl-l,3,2-dioxaborolan-2-yi)-7-[4- (trifluoromethyl)phenyl]-2-naphthoate (50 mg, 0.106 mmol) from Example 3, Step 1, PdCl2CdPPf)-CH2Cl2 adduct (8.68 mg, 10.63 mumol), 3-(4-bromophenyl)-lH-l,2,4-triazole (35.7 mg, 0.159 mmol) under vacuum, was added DMF (2 mL) and 2 M potassium carbonate (0.159 ml, 0.319 mmol). The mixture was stirred under a nitrogen atmosphere at 90 0C for 3 h. The reaction was worked up by the addition of water, extracted with ethyl acetate, dried over Na2SO4, and evaporated. The residue was purified by Combiflash chromatography (0- 100%EtOAc/hexane) to afford the desired intermediate ester. The ester was dissolved in 2 mL of THF and ImL of MeOH and treated with 1 mL of 2 N KOH at rt for 3 h. The reaction was worked up by the addition of aqueous citric acid, extracted with ethyl acetate, dried over Na2SO4, and evaporated. The residue was purified by Combiflash chromatography (0-30% solvent A/DCM with solvent A being a mixture of concentrated ammonia and MeOH (1 :4)) to afford the desired 4-[4-(4H”-[l,2,4]triazol-3-yl)-phenyl]-7-(4-trifluoromethylphenyl)-2-naphthoic acid as a solid. MS: M+H(+ESI)= 460.0 and M-H(-ESI)= 458.0.

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 118863-62-0.

Reference:
Patent; MERCK FROSST CANADA LTD.; WO2009/70873; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7411-23-6, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Step 1:To a suspension of NaH (60% in mineral oil, 194.0 mg, 4.8 mmol) in THF (20 mL) at 000 is added a solution of triazole A6a (1 .0 g, 4.4 mmol, Matrix) in THF (20 mL). The reaction mixture is allowed to warm to RT and is stirred for 30 mm. It is then cooled again to 0C and allyl bromide A9a (762.9 iL, 8.8 mmol, Aldrich) is added. The reaction mixture is stirred overnight at RT and diluted with EtOAc (50 mL). The organic layer is washed with water (25 mL) and brine (25 mL), dried over Mg504, and filtered. The filtrate is concentrated to give A9b which is used as is in subsequent steps.

I am very proud of our efforts over the past few months and hope to 3,5-Dibromo-1H-1,2,4-triazole help many people in the next few years.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; FADER, Lee; BILODEAU, Francois; POIRIER, Maude; PARISIEN, Mathieu; KUHN, Cyrille; THIBEAULT, Carl; TRINH, Thao; WO2014/70978; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 288-36-8, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of 2-bromo-3-thiophene carboxylic acid (1.50 g, 7.24 mmol), 1H-1,2,3- triazole (0.600 g, 8.69 mmol), potassium carbonate (2.00 g, 14.5 mmol), and copper iodide (0.138 g, 0.724 mmol) in DMF (36.2 mL) was purged subsurface with nitrogen and heated to 75 C for 96 h. The reaction was diluted with water, washed with ether, and acidified with cone. HC1. The acidic aqueous solution was extracted 3x with EtOAc and the combined organic fractions were washed with brine, dried over magnesium sulfate, filtered, and concentrated. The crude material was purified by silica gel gradient chromatography [0-70% (1% acetic acid in EtOAc) in hexanes], to provide Intermediate C as a solid. LRMS m/z (M+H) 196.2 found, 196.1 required.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1H-1,2,3-Triazole, hurry up and to see.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; REGER, Thomas, S.; SKUDLAREK, Jason, W.; (0 pag.)WO2016/85784; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

A mixture of 5-(8-azabicyclo[3.2.1]octan-3-yl)-3-(6-phenylpyridin-3-yl)-8,9- dihydropyrazolo[l,5-a]pyrido[3,2-e]pyrimidin-6(7H)-one (86 mg, 0.19 mmoL), 1H-1,2,4- triazole-3-carboxylic acid (25.9 mg, 0.23 mmoL), EDC (73 mg, 0.38mmoL), HOBt (51.6 mg, 0.38 mmoL) and DIEA (199 uL, 1.15 mmoL) in DMF (4 mL) was stirred at room temperature for 2h. Purification with prep-LC provided 5-(8-(4H-l,2,4-triazoIe-3-carbonyl)-8- azabicyclo[3.2.1 ]octan-3-yl)-3-(6-phenylpyridin-3-yl)-8,9-dihydropyrazolo[l ,5-a]pyrido[3,2- e]pyrimidin-6(7H)-one: LCMS tR = 2.33 Min (10 min run, UV 254nm)- Mass calculated for, M+ 545.2, observed LC/MS m/z 546.01 (M+H).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1,2,4-Triazole-3-carboxylic acid, in my other articles.

Reference:
Patent; SCHERING CORPORATION; MENG, Zhaoyang; REDDY, Panduranga Adulla, P.; SIDDIQUI, M. Arshad; MANDAL, Amit, K.; LIU, Duan; ZHAO, Lianyun; MCRINER, Andrew; WO2012/27234; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 1001401-62-2, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 1 2-(((3R,6R)-l-(2-(2H-l,2,3-Triazol-2-yl)benzoyl)-6-methylpiperidin-3- yl)amino)isonicotinonitrile Step 1: (2R,55′)-Benzyl 2-methyl-5-((methylsulfonyl)oxy)piperidine-l-carboxylate (2) A solution of (2R,55)-benzyl 5-hydroxy-2-methylpiperidine-l-carboxylate (15.0 g, 60.2 mmol), 4-dimethylamino pyridine (0.74 g, 6.0 mmol), and (( (401 mL) was treated with DIEA (15.8 mL, 90.0 mmol) and cooled at 0 C. Methanesulfonyl chloride (5.9 mL, 75 mmol) in (( (67 mL) was added dropwise and stirring continued at 0 C for 2 h. The reaction was diluted with water and 1 N HQ and the separated organics were washed with brine, dried over MgS04, filtered, concentrated and dried, providing the crude title compound which was used without further purification. LRMS m/z (M+H) 328.3 found, 328.1 required. Step 2: (2R,5R)-Benzyl 5-azido-2-methylpiperidine-l-carboxylate (3) A solution of crude (2R,55)-benzyl 2-methyl-5-((methylsulfonyl)oxy)piperidine- 1 -carboxylate (19.7 g, 60.2 mmol) and sodium azide (6.65 g, 102 mmol) in DMF (86 mL) was heated to 85 C overnight. The reaction was diluted with EtOAc, washed 2x with water, lx with brine, dried over magnesium sulfate, filtered, and concentrated, providing the crude title compound which was used without further purification. LRMS m/z (M+H) 275.3 found, 275.2 required. Step 3: (2R,5R)-Benzyl 5-amino-2-methylpiperidine-l -carboxylate (4) To a solution of (2R,5R)-benzyl 5-azido-2-methylpiperidine-l-carboxylate (15.2 g, 55.4 mmol) in THF (111 mL) was added trimethylphosphine (1.0 M in toluene, 55.4 mL, 55.4 mmol) dropwise over 20 min. The reaction was quenched with water (30 mL) and stirred at RT overnight. The mixture was diluted with dichloromethane, washed 2x with water, lx with brine, dried over magnesium sulfate, filtered, and concentrated, providing the crude title compound as an orange oil which was used without further purification. LRMS m/z (M+H) 249.6 found, 249.3 required. Step 4: (2R,5R)-Benzyl-5-((?ert-butoxycarbonyl)amino-2-methylpiperidine-l-carboxylate (5) A solution of (2R,5R)-Benzyl 5-amino-2-methylpiperidine-l-carboxylate (3.08 g, 12.4 mmol) and 4-dimethylaminopyridine (0.015 g, 0.12 mmol) in dichloromethane (62 mL) was treated with a solution of di-tert-butyl dicarbonate (2.91 mL, 12.5 mmol) in dichloromethane (20 mL) dropwise and stirred at RT overnight. The reaction was concentrated in vacuo, providing the crude title compound which was used without further purification. LRMS m/z (M+H) 349.4 found, 349.3 required. Step 5: tert-Butyl ((3R,6R)-6-methylpiperidin-3-yl)carbamate (6) A solution of (2R,5R)-benzyl-5-((/er/-butoxycarbonyl)amino-2-methylpiperidine- 1 -carboxylate (4.32 g, 12.4 mmol) and palladium (10 wt % on activated carbon, 0.300 g, 2.82 mmol) in degassed ethanol (100 mL) and methanol (5 mL) was stirred for 72 h under an atmosphere of hydrogen gas. Additional palladium (10 wt % on activated carbon, 0.10 g, 0.94 mmol) was added, and the reaction was recharged with hydrogen gas and allowed to stir at RT overnight. The degassed mixture was then filtered over celite, washing with EtOH. The filtrate was concentrated to give the titled compound as a crude, light yellow solid which was used without further purification. Step 6: tert-Butyl((3R,6R)-l-(2-(2H-l,2,3-triazol-2-yl)benzoyl)-6-methylpiperidin-3- yl)carbamate (7) A solution of 2-(2H- 1,2,3 -triazol-2-yl)benzoic acid (4.24 g, 22.40 mmol), tert- butyl ((3R,6R)-6-methylpiperidin-3-yl)carbamate (3.20 g, 14.93 mmol), l-hydroxy-7- azabenzotriazole (4.06 g, 29.9 mmol), EDC (5.72 g, 29.9 mmol), and DIEA (15.65 mL, 90 mmol) in DMF (100 mL) was heated at 50 C overnight. The reaction was diluted with saturated, aqu. aHC03 and extracted 2x with EtOAc. The organics were washed with brine, dried over MgS04, filtered, and concentrated. The residue was purified by silica gel gradient chromatography (0-80% EtOAc in hexanes), providing the title compound. LRMS m z (M+H) 386.4 found, 386.2 required. Step 7: (2-(2H-l,2,3-Triazol-2-yl)phenyl)((2R,5R)-5-amino-2-methylpiperidin-l-yl)methanone (8) A solution of tert-butyl((3R,6R)-l-(2-(2H-l,2,3-triazol-2-yl)benzoyl)-6- methylpiperidin-3-yl)carbamate (3.6 g, 9.3 mmol) in EtOAc (78 mL) was saturated with HC1 (g) and stirred for 2 h. The reaction was concentrated and the residue basified with 1 N NaOH. The mixture was extracted 3x with EtOAc, then the organics were washed with brine, dried over MgS04, filtered, and concentrated. The residue was purified by silica gel gradient chromatography (0-20% MeOH in CH2C12), providing the title compound. LRMS m/z (M+H) 286.3 found, 286.3 required. Step 8: 2-(((3R,6R)-l-(2-(2H- 1,2,3 -triazol-2-yl)benzoyl)-6-methylpiperidin-3- yl)amino)isonicotinonitrile A solution of (2-(2H-l,2,3-triazol-2-yl)phenyl)((2R,5R)-5-amino-2- methylpiperidin- 1 -yl)methanone (400 mg, 1.40 mmol) 2-fluoroisonicotinonitrile (342 mg, 2.80 mmol), and cesium carbonate (776 mg, 2.383 mmol) in DMSO (4673 muKappa) was heated at 50 C for 48 h. The reaction was cooled, dilut…

This is the end of this tutorial post, and I hope it has helped your research about 1001401-62-2!

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; SKUDLAREK, Jason, W.; WO2014/85208; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7411-23-6, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

2-(3-bromopropoxy)tetrahydro-2H-pyran (5.60 g, 4.25 ml, 25.1 mmol, Eq: 1.00) and DIPEA (3.24 g, 4.38 ml, 25.1 mmol, Eq: 1.00) were added to a suspension of 3,5-dibromo-lH- 1,2,4- triazole (5.69 g, 25.1 mmol, Eq: 1.00) in MeCN (50.0 ml). The reaction was stirred at 90 C for 3 hr, cooled down to RT and concentrated in vacuo. The residue was purified by flash column chromatography over silica gel (eluent: EtOAc/ heptane from 20/80 to 60/40) to yield 3, 5-dibromo-l-(3-tetrahydropyran- 2- yloxypropyl)- 1,2, 4-triazole (7.50 g, 19.7 mmol, 79% yield) as light yellow oil.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 3,5-Dibromo-1H-1,2,4-triazole.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; RATNI, Hasane; CARTER, Jennifer Louise; (54 pag.)WO2020/48904; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 81606-79-3, name is 2-(1,2,4-Triazol-1-yl)acetonitrile belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Safety of 2-(1,2,4-Triazol-1-yl)acetonitrile

General procedure: A solution of aryl acetonitrile 2 (50 mg), and triethylamine (1.1 equiv.) in dimethylformamide dimethyl acetal (0.5 mL, 3.76 mmol) was heated in a microwave reactor at 120 C for 20 minutes. The mixture was cooled to RT, and solvents were then evaporated. To the resulting crude product 3 was added hydrazine mono-hydrobromide (3.0 equiv.), 200 proof EtOH (1.0 mL), and H2O (0.3 mL). The mixture was heated in a microwave reactor at 120 C for 20 minutes. The mixture was cooled to RT and concentrated in vacuo. The resulting residue was subjected to liquid-liquid extraction using saturated NaHCO3 (aq) and CH2Cl2. The organic layer was collected, dried over anhydrous MgSO4, filtered and removed under vacuum to afford 4.The resulting crude product 4 and 2-arylsubstitutedmalondialdehydes or 1,1,3,3tetramethoxypropane (1.0 equiv.) were dissolved in glacial AcOH (1.0 mL) and 200 proof EtOH (1.5 mL). The mixture was heated in a microwave reactor at 120 C for 20 minutes. After cooling on ice, the precipitate was collected on a fine scintered-glass frit and washed with icecold EtOH (2 x 1.0 mL). The resulting crystals 5-32 were dried and collected.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 2-(1,2,4-Triazol-1-yl)acetonitrile, in my other articles.

Reference:
Article; Singleton, Justin D.; Dass, Reuben; Neubert, Nathaniel R.; Smith, Rachel M.; Webber, Zak; Hansen, Marc D.H.; Peterson, Matt A.; Bioorganic and Medicinal Chemistry Letters; vol. 30; 2; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics