Introduction of a new synthetic route about 4H-1,2,4-Triazol-4-amine

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 4H-1,2,4-Triazol-4-amine.

Reference of 584-13-4, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 584-13-4, name is 4H-1,2,4-Triazol-4-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: The complex was prepared by dissolving 4-hydroxypyridine (0.85g, 8.8mmol) in an aqueous solution of Zn(N3)2 saturated with hydrazoic acid (20mL, 8.9mmol Zn) at 80C, then the resulting solution was allowed to stand at room temperature. After three days, the colorless crystals which separated were collected by filtration and dried in air (yield: 0.76g, 42%).

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 4H-1,2,4-Triazol-4-amine.

Reference:
Article; Mautner, Franz A.; Berger, Christian; Gspan, Christian; Sudy, Beate; Fischer, Roland C.; Massoud, Salah S.; Polyhedron; vol. 130; (2017); p. 136 – 144;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Simple exploration of 68744-64-9

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 5-(Trifluoromethyl)-4H-1,2,4-triazole-3-thiol.

Reference of 68744-64-9, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 68744-64-9, name is 5-(Trifluoromethyl)-4H-1,2,4-triazole-3-thiol, molecular formula is C3H2F3N3S, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

5-Trifluoromethyl-lH- (1, 2,4)-triazole-3-thiol (l. 0g), heptafluoro-l-iodopropane (3.5 g) and triethyl- amine (0.90 g) were stirred in DMF (10 ml) at 90 C for 24 hours. After cooling to room temperature, he reaction mixture was diluted with ethyl acetate and washed with water and saturated aqueous solution of sodium chloride. After drying the organic layer with magnesium sulfate, the solvent was distilled off under the reduced pressure to obtain 3-heptafluoropropylsulfanyl-5-trifluoro- methyl-lH- (1, 2,4)-triazole (0.70g).

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 5-(Trifluoromethyl)-4H-1,2,4-triazole-3-thiol.

Reference:
Patent; BAYER CROPSCIENCE AG; WO2005/95351; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Brief introduction of 288-36-8

I am very proud of our efforts over the past few months and hope to 1H-1,2,3-Triazole help many people in the next few years.

Electric Literature of 288-36-8, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Under anhydrous operation, 1H-1,2,3-triazole (2.0 g, 28.9 mmol) was weighed into a 100 mL eggplant-shaped flask, and 30 mL of anhydrous THF was added.NaH (1.065 g, 43.1 mmol) was added portionwise under N2 aq ice bath and stirred at 0 C for half an hour.To the reaction system was added 2-(trimethylsilyl)ethoxymethyl chloride (SEM-Cl, 7.6 mL, 43.1 mmol).After the addition was completed, the mixture was stirred at room temperature for 10 h.The reaction was completed by TLC, quenched with water and extracted with ethyl acetate (2×100 mL).The organic phases were combined, washed once with brine, dried over anhydrous sodium sulfate and evaporated.Separation using a column (petroleum ether: ethyl acetate = 10:1),3.6 g of a colorless liquid were obtained in a yield of 74.2%.

I am very proud of our efforts over the past few months and hope to 1H-1,2,3-Triazole help many people in the next few years.

Reference:
Patent; China Pharmaceutical University; Xiang Hua; Huang Ali; Wang Chong; (19 pag.)CN108707177; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

What Kind of Chemistry Facts Are We Going to Learn About 23579-79-5

In the meantime we’ve collected together some recent articles in this area about 3,5-Dibromo-1-methyl-1H-1,2,4-triazole to whet your appetite. Happy reading!

Application of 23579-79-5, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 23579-79-5, name is 3,5-Dibromo-1-methyl-1H-1,2,4-triazole, molecular formula is C3H3Br2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

In a 25 mL round bottomed flask, 3,5-dibromo-1-methyl-1H-1,2,4-triazole (Int-41, 442 mg, 1.84 mmol) was dissolved in DMF (4 mL) and potassium carbonate (483 mg, 3.5 mmol), followed by 3-fluorophenol (200 mg, 1.75 mmol) were added. The reaction mixture was stirred for 18 h at 100 C. After cooling, it was concentrated in vacuo, the residue was purified directly by column chromatography (silica gel, 70 g, eluting with ethyl acetate / n-heptane, gradient 0: 100 to 20:80 v/v) to afford the title compound as white solid (397 mg, 83%). HPLC (method LCMS_fastgradient) tR= 1.05 min. 1H NMR (CDCl3, 300 MHz): delta 3.78 (s, 3 H), 6.94-7.02 (m, 1 H), 7.06-7.14 (2 H), 7.34-7.43 (m, 1 H). MS (ES+) m/z 272.1, 274.1 [M+H, Br isotopes].

In the meantime we’ve collected together some recent articles in this area about 3,5-Dibromo-1-methyl-1H-1,2,4-triazole to whet your appetite. Happy reading!

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; BERCHTOLD, Stefan; GALLEY, Guido; GOERGLER, Annick; JAKOB-ROETNE, Roland; KRUMMENACHER, Daniela; LIMBERG, Anja; NEIDHART, Werner; RATNI, Hasane; REUTLINGER, Michael; RODRIGUEZ SARMIENTO, Rosa Maria; SCHNIDER, Christian; (309 pag.)WO2018/87018; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

What Kind of Chemistry Facts Are We Going to Learn About 27808-16-8

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 4-Methyl-1H-1,2,3-triazole, in my other articles.

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Safety of 4-Methyl-1H-1,2,3-triazole

DMF (1.5 ml) was added to a mixture of methyl 3-iodo-6-methyl-2-pyridinecarboxylate D44 (200 mg), 4-methyl-1H-1,2,3-triazole D77 (120 mg), (1R,2R)-N,N’-dimethyl-1,2-cyclohexanediamine (20.54 mg, 0.144 mmol), copper(I) trifluoromethanesulfonate benzene complex (18.17 mg, 0.036 mmol) and cesium carbonate (470 mg, 1.444 mmol) in a screw-topped vial. The mixture was degassed via 3 vacuum/nitrogen cycles and heated with shaking to 120 C. for 5 hours. The reaction mixture was evaporated to dryness under reduced pressure. The residue was dissolved in water/MeOH (1:1, 3 ml) and acidified to pH=2 by addition of 2 M HCl solution. The resulting mixture was evaporated to dryness under reduced pressure then the residue was triturated with DCM/MeOH (3:1, 5 ml). The mixture was filtered washing with more DCM/MeOH (3:1, 5 ml). The filtrate was treated with TMS-diazomethane solution (2 M in hexanes, 4 ml, 8 mmol) to re-esterify the acid. The reaction mixture was evaporated under reduced pressure and the residue was purified by flash chromatography on silica gel (Biotage Snap 25 g column, EtOAc/Cy from 20/80 to 50/50) to give the title compound D78 (121 mg) as a colourless solid. UPLC (Acid QC_POS-50-800): rt=0.59 minutes, peak observed: 233 (M+1). C11H12N4O2 requires 232. 1H NMR (400 MHz, CDCl3) delta ppm 8.15 (d, 1H), 7.59 (s, 1H), 7.37 (d, 1H), 3.92 (s, 3H), 2.66 (s, 3H), 2.40 (s, 3H).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 4-Methyl-1H-1,2,3-triazole, in my other articles.

Reference:
Patent; ALVARO, Giuseppe; Amantini, David; Castiglioni, Emiliano; Di Fabio, Romano; Pavone, Francesca; US2010/144760; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Analyzing the synthesis route of 288-36-8

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,3-Triazole.

Application of 288-36-8, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Intermediate 1 : 5-Fluoro-2-[1 ,2,3]triazol-2-yl-benzoic acid.5-Fluoro-2-[1 ,2,3]triazol-2-yl-benzoic acid. To a solution of 5-fluoro-2- iodo-benzoic acid (3.86 g, 14.65 mmol), 2H-[1 ,2,3]triazole (2.5 g, 36.2 mmol), Cs2C03 (8.62 g, 24.5 mmol), frans-N,N’-dimethyl-cyclohexane-1 ,2-diamine (0.4 mL), Cul (244 mg) and DMF (13 mL) were added to a microwave ready vessel and heated to 100 C for 10 min. The mixture was cooled, diluted with water, and extracted with EtOAc. The aqueous layer was acidified and extracted with EtOAc. The organic layer was dried over Na2S04 and concentrated.Chromatography (DCM to 10% MeOH/1 % HOAc/DCM) gave the product as a white powder (2.14 g, 71 %). 1H NMR (400 MHz, CD3OD): 7.91 (s, 2H), 7.76 (dd, J = 8.9, 4.8 Hz, 1 H), 7.59 (dd, J = 8.5, 2.9 Hz, 1 H), 7.49 – 7.42 (m, 1 H).

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,3-Triazole.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LETAVIC, Michael; RUDOLPH, Dale, A.; SAVALL, Brad, M.; SHIREMAN, Brock, T.; SWANSON, Devin; WO2012/145581; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Why Are Children Getting Addicted To 1H-1,2,4-Triazol-5-amine

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1H-1,2,4-Triazol-5-amine ,and how the biochemistry of the body works.

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 61-82-5

General procedure: A mixture of aldehyde (1.0 mmol), dimedone (1.0 mmol),1H-1,2,4-triazol-3-amine (1.0 mmol) and nano-AlPO4(SO3H) (0.1 g) was stirred in the acetonitrile (4.0 mL)at 50 C for an appropriate time. After the completion of thereaction as indicated by TLC, dichloromethane was addedto the solidified mixture and the insoluble catalyst was separatedby centrifugation. Evaporation of the solvent from thefiltrate and recrystallization of the solid residue from hot ethanolafforded the pure products in good to excellent yields

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1H-1,2,4-Triazol-5-amine ,and how the biochemistry of the body works.

Reference:
Article; Sharghi, Hashem; Aboonajmi, Jasem; Aberi, Mahdi; Shiri, Pezhman; Journal of the Iranian Chemical Society; vol. 15; 5; (2018); p. 1107 – 1118;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

What I Wish Everyone Knew About 4922-98-9

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 4922-98-9

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 4922-98-9, name is 5-Phenyl-1H-1,2,4-triazol-3-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 4922-98-9

General procedure: 3-Amino-1,2,4-triazole 8a?f (1.0 mmol), o-hydroxybenzaldehyde9a?e (1.0 mmol), acetone (10) (0.22 ml,3.0 mmol), and abs. EtOH (2 ml) were mixed in amicrowave process vial, and then 4 N solution of HCl indioxane (0.07 ml, 0.3 mmol) was added. The mixture wasirradiated at 150°C for 30 min. The reaction mixture wascooled by an air flow and stirred for 24 h at roomtemperature for complete precipitation of the product. Theprecipitate was filtered off, washed with EtOH (1 ml) andEt2O (3×1 ml), and dried. Compounds 1a?w were obtainedin a form of white solids.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 4922-98-9

Reference:
Article; Guemue?, Mustafa K.; Gorobets, Nikolay Yu.; Sedash, Yuriy V.; Chebanov, Valentin A.; Desenko, Sergey M.; Chemistry of Heterocyclic Compounds; vol. 53; 11; (2017); p. 1261 – 1267; Khim. Geterotsikl. Soedin.; vol. 53; 11; (2017); p. 1261 – 1267,7;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

What Kind of Chemistry Facts Are We Going to Learn About 288-88-0

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,4-Triazole.

Application of 288-88-0, New Advances in Chemical Research in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

EXAMPLE 1 STR56 4.15 g (0.103 mole) of sodium hydroxide and a spatula-tip of azo-bis-isobutyronitrile were added to a solution of 71.55 g (0.3 mole) of 2-tert.-butyl-2-(4-chloro-phenyl-ethyl)-oxirane in 10 ml of N-methylpyrrolidone. The mixture was heated to 120 C. and a solution of 20.7 g (0.3 mole) of 1,2,4-triazole was added dropwise in the course of 3 hours, with stirring. The mixture was then stirred at 120 C. for a further hour and then allowed to cool. Thereafter, it was worked up by a procedure in which the N-methyl-pyrrolidone was distilled off at a bath temperature of 100 C. under a pressure of 0.2 mbar and the residue which remained was washed with water and then dried and stirred with 150 ml of benzine. The solid product which deposited was filtered off and dried again. 78.9 g (85.8% of theory) of 1-(4-chloro-phenyl)-4,4-dimethyl-3-(1,2,4-triazol-1-yl-methyl)-pentan-3-ol were obtained in this manner. It was demonstrated by analysis by HPLC that the product is not contaminated by the corresponding 1,3,4-triazole derivative.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,4-Triazole.

Reference:
Patent; Bayer Aktiengesellschaft; US4626594; (1986); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Simple exploration of 1533519-85-5

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about Methyl 2-((4-(4-cyclopropylnaphthalen-1-yl)-4H-1,2,4-triazol-3-yl)thio)acetate.

Reference of 1533519-85-5, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 1533519-85-5, name is Methyl 2-((4-(4-cyclopropylnaphthalen-1-yl)-4H-1,2,4-triazol-3-yl)thio)acetate, molecular formula is C18H17N3O2S, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 11. Preparation of methyl 2-((5-bromo-4-(4-cyclopropylnaphthalen-l-yl)-4H-l,2,4-triazol-3-yl)thio)acetate [076] To a flask added methyl 2-((4-(4-cyclopropylnaphthalen-l-yl)-4H-l,2,4-triazol-3-yl)thio)acetate (4.0 g, 11.8 mmol), l,3-Dibromo-5,5-dimethylhydantoin (11.8 mmol) and ethyl acetate (100 mL) to form a mixture, the mixture was heated to reflux, after the reaction was complete, the mixture was cooled to room temperature, then worked up to obtain phenyl 2-((5-bromo-4-(4-cyclopropylnaphthalen-l-yl)-4H-l,2,4-triazol-3-yl)thio)acetate as a yellow solid 4.9 g, yield 99%, LC-Ms: m/z (ESI): 418,420 (M+H)+, 1H NMR (400 MHz, CDC13): delta 8.57 (d, J=8.0 Hz, 1 H), 7.69 (m, 1 H), 7.61 (m, 1 H), 7.39 (s, 2 H), 7.26 (d, J=8.4 Hz, 1 H), 4.07 (dd, J=16.0, 25.6 Hz, 2 H), 3.75 (s, 3 H), 2.46 (m, 1 H), 1.20 (m, 2 H), 0.91 (m, 2 H).

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about Methyl 2-((4-(4-cyclopropylnaphthalen-1-yl)-4H-1,2,4-triazol-3-yl)thio)acetate.

Reference:
Patent; SUNSHINE LAKE PHARMA CO., LTD.; CHEN, Weiqiang; LUO, Jian; LIU, Lixue; FAN, Yuping; WO2014/198241; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics