Day: July 30, 2021

Related Products of 288-36-8, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

The iodide 19 (6.04 kg, 23.0 mol), THF (45 E) and DMF (9.0 E) were charged to a vessel. Copper iodide (218 g, 1.15 mol) and potassium carbonate (7.94 kg, 57.4 mol) were added and the mixture heated to an internal temperature of40 C. 1,2,3-Triazole (3.16 kg, 46.0 mol) was added as asolution in THF (6.0 E) over half an hour (no exotherm) andheating continued to 65 C. (again no exotherm observed) and the reaction monitored by HPEC. Once complete N,Ndimethylethylenediamine (244 mE, 2.30 mol) was addedand mixture cooled to RT. Aqueous 3.6 M HC1 (36 E) wasadded (exotherm) and the mixture extracted twice with ethylacetate (2×30 E). The combined organics were washed with EiC1 solution (2×20 E). The acid solution assayed for 3.79 kg of 5 (81%) and 4.64 kg of 5 and 20 combined (99%). A solution of acids 5 and 20 (approx. 4.64 kg, 22.9 mol) in THF and EtOAc (approx. 110 E) was concentrated to lowvolume. THF (90 E) was added and the solvent composition checked by ?H NMR to ensure most ethyl acetate had been removed. Sodium tert-butoxide (2.42 kg, 25.2 mol) was added slowly as a solid over 1-2 h (slight exotherm), allowing the sodium salt to form and stirred overnight at RT. The liquors showed a 45:55 ratio of product:starting material and the solid was collected by filtration, washed with THF (2×20 E) and dried in a vacuum oven (T=40 C.) for 15 h to afford 4.22 kg of crude sodium salt. The crude sodium salt (4.22 kg, 14.9 mol) was charged to a 50 E vessel and 3.6 M HC1 (21.2 E) was added with cooling. The slurry was thenstirred at room temperature for 16 h and the off-white solidisolated by filtration. The cake was washed with water (11E) and iPAc/Heptane (2×5 E), then dried in a vacuum oven(T=35 C.) for 15 h to give 3.10 kg of crude acid 5 (97.9ECAP, 92 wt %, corrected weight 2.85 kg, 61% yield from19). The acid 5 (2.85 kg corrected, 14.0 mol) was chargedto a 50 E vessel and EtOAc (28 E) and dilute 0.22 M HC1 (14 E) were added and the mixture stirred until two clear phases resulted. The aqueous layer was removed and the organic layer filtered to remove any particulate matter. Theethyl acetate was reduced to about 8 E and then heptane (15.6 E) was added over 1 h and the liquors sampled to check for appropriate losses. The solid was isolated by filtration, washed with heptane:ethyl acetate (3:1, 4 E) and dried on the filter under nitrogen to give 2.81 kg of acid 5.m.p. 167.5 C. ?H NMR (400 MHz, d5-DMSO): oe 12.09 (brs, 1H), 8.04 (s, 1H), 7.62 (d, 1H, J=8.4 Hz), 7.58 (d, 1H, J=1.2 Hz), 7.49 (dd, 1H, J=8.4, 1.2 Hz), 2.41 (s, 3H). ?3C NMR (100.6 MHz, d5-DMSO): oe 168.0, 139.2, 136.4, 135.8, 132.5, 130.3, 128.7, 124.8, 20.9. HRMS (ESI): mlz [M+H] calcd for C,0H9N302: 204.0773; found: 204.0781.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 288-36-8, Happy reading!

Reference:
Patent; MERCK SHARP & DOHME CORP.; Fleitz, Fred; Mangion, Ian; Yin, Jingjun; (11 pag.)US9441254; (2016); B2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 16681-70-2, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 41 (S)-N-(2-(2-cyanopyrrolidine-1-yl)-2-oxoethyl)-1H-1,2,3-triazole-5-carboxamide 1H-1,2,3-triazole-4-carboxylic acid (0.092 g, 0.814 mmol) was dispersed in dry dioxane (3 mL) in a round bottom flask with nitrogen. To this 1-chloro-N,N,2-trimethylprop-1-en-1-amine (0.151 ml, 1.139 mmol) was added and the reaction was stirred for 30 minutes at room temperature. The starting material dissolves over time. Then (S)-1-(2-aminoacetyl)pyrrolidine-2-carbonitrile hydrochloride (0.247 g, 1.302 mmol) with N-ethyl-N-isopropylpropan-2-amine (0.307 ml, 1.709 mmol) was added and the mixture was stirred for 2 h, evaporated to dryness and redissolved in ethyl acetate. Followed by washing with 0.1N citric acid and saturated sodium bicarbonate and brine. After drying over sodium sulfate, filtration and evaporation, the product was purified using column chromatography. Yield: 34 mg, 40% 1H NMR (400 MHz, DMSO) (9/1 mixture of trans/cis amide rotamers) delta 15.53 (s, 1H), 8.58-8.44 (s, 1H), 8.39 (s, 1H), 5.28-5.22 (m, 0.1H), 4.77 (dd, J=3.76, 7.32 Hz, 1H), 4.30 (dd, J=5.61, 16.77 Hz, 0.2H), 4.10 (d, J=5.76 Hz, 2H), 3.68 (ddd, J=4.04, 7.68, 9.39 Hz, 1H), 3.50 (td, J=6.84, 9.09 Hz, 1H), 2.31-1.88 (m, 4H). UPLC I (ESI) Rt 0.72 min, m/z 249.6 [M+H]+ (96%); LC-MS (I-B) Rt 4.0 min, m/z 249.0 [M+H]+ (96%)

In the meantime we’ve collected together some recent articles in this area about 16681-70-2 to whet your appetite. Happy reading!

Reference:
Patent; Fox Chase Cancer Center; Jansen, Koen; De Meester, Ingrid; Heirbaut, Leen; Cheng, Jonathan D.; Joossens, Jurgen; Augustyns, Koen; Van Der Veken, Pieter; US2014/357650; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world.6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C8H8N4

A mixture of formamidine from Step 1 (300 mg) and 4-triazolyl-aniline (167 mg, 1 eq) in AcOH (3 ml) was heated to 80 for 2 h. Cooled, and the resulting solid was isolated by filtration, washed with sodium bicarbonate, water and MeCN. The solid was purified by column chromatography on silica gel with DCM:EtOH:NH3 (400:8:1 to 200:8:1) as eluant to give the title compound.1H NMR delta 10.36 (IH, br s), 9.29 (IH, s), 8.93 (IH, s), 8.63 (IH, s), 8.25 (2H, m), 8.03 (3H, m), 7.86 (2H, d, J 9.25Hz), 7.81 (3H, m); LC-MS rt 2.61 m/z 418 ES+.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 4-(1,2,4-Triazol-1-yl)aniline ,and how the biochemistry of the body works.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 16681-65-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Intermediate 29: step b (2,6-dimethylpyridin-4-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanone A solution of n-BuLi (3.8 mL, 9.5 mmol, 2.5 M solution in hexane) was added slowly to a solution of 1 -methyl- l H-1, 2 ,3-triazole (0.83 g, 10 mmol) in THF (48 mL) at -50 C. After- addition, stirring was continued for an additonal 30 minutes and N-methoxy-N ,2,6- trimethylisonicotinamide (0.97 g, 5.0 mmol. Intermediate 29: step a) dissolved in THF (12 mL) was slowly added. An additional 2 mL of THF was used to complete the quantitative addition. The mixture was stirred at -50 C for 5 minutes then warmed to room temperature and stirred overnight. The solution was quenched with saturated aqueous NH4C1. H20 was added and layers were separated. The aqueous layer was extracted with EtOAc and the combined organic extracts washed with brine, dried over MgSCu, filtered and evaporated in vacuo. The crude product was purified using flash column chromatography (0 to 100% EtOAc/DCM) to provide the title compound.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1-Methyl-1H-1,2,3-triazole.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid

To a solution of the acid (10.4 g, 51.2 mmol) in THF (250 mL), CDI (8.7 g, 53.7 mmol) was added. After 3.5 h, aqueous NH3 solution (174.1 g, 25% in water, 2.56 mol) was added. The biphasic mixture was stirred at room temperature for 75 mm. The pH was adjusted to pH 7 with 6 N HC1 and DCM were added. The layers were separated and the organic layer was washed with water, dried over Na2504 and the solvent was removed under reduced pressure. The residue was stirred with diethyl ether for 30 mm, filtered and washed with diethyl ether to give 7.9 g (76 %) of the primary amide.1H NMR (300 MHz, d6-dmso) oe = 8.01 (s, 2H, Htriazoiyi), 7.79 (br s, 1H, NH), 7.61 (d, J =8.1 Hz, 1H, Harom), 7.40 (d, J = 8.4 Hz, 1H, Harom), 7.38 (s, 1H, Harom), 7.32 (br s, 1H, NH),2.40 (s, 3H, CH3).13C NMR (75 MHz, d6-dmso) oe = 168.6, 138.0, 135.8, 134.6, 132.0, 130.5, 129.0, 123.8,20.0.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 956317-36-5.

Reference:
Patent; SANDOZ AG; HOeFERL-PRANTZ, Kathrin; BARTH, Roland; RICHTER, Frank; ZUPANCIC, Borut; (126 pag.)WO2016/20403; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Safety of 5-Bromo-1H-1,2,4-triazole

To a 100 mL round bottomed flask, equipped with a stir bar, was added copper(I) iodide (0.397 g, 2.08 mmol), 3-bromo-1H-1,2,4-triazole (4.62 g, 31.2 mmol), and cesium carbonate (6.79 g, 20.83 mmol), as solids. These solids were diluted with anhydrous dimethyl sulfoxide (34.7 mL). Then 1-iodo-4-(trifluoromethoxy)benzene (1.65 mL, 10.4 mmol) was added as a liquid. The flask was placed under nitrogen atmosphere, and the suspension was heated to an internal temperature of 100° C. for 20 hours. The reaction mixture was allowed to cool to room temperature and filtered through a pad of Celite®, washing with excess ethyl acetate (200 mL). The filtrate was poured into a brine solution (200 mL), and the layers were partitioned. The aqueous phase was extracted with additional ethyl acetate (2*100 mL). The combined organic layers were dried over anhydrous magnesium sulfate, filtered, and concentrated. The resulting residue was purified via flash column chromatography using 10-50percent ethyl acetate/hexanes as eluent to afford the title compound as a white solid (1.80 g, 54percent): 1H NMR (400 MHz, DMSO-d6) delta 9.35 (s, 1H), 7.97 (d, J=8.9 Hz, 2H), 7.60 (d, J=8.4 Hz, 2H); 19F NMR (376 MHz, DMSO-d6) delta -57.06; ESIMS m/z 308, 310 ([M+H]+).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 5-Bromo-1H-1,2,4-triazole, in my other articles.

Reference:
Patent; DOW AGROSCIENCES LLC; Fischer, Lindsey G.; Baum, Erich W.; Crouse, Gary D.; DeAmicis, Carl; Lorsbach, Beth; Petkus, Jeff; Sparks, Thomas C.; Whiteker, Gregory T.; US2014/274688; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

[0674] Compound 10 (32 mg, 75 fllllOl, 1.0 eq.) was dissolvedinDMF(500 f.LL). lH-1,2,3-triazole-4-carboxylic acid(25 mg, 221 f.tmol, 3.0 eq.) was dissolved in DMF (500 f.LL),followed by the additionofDIPEA (51 f.LL, 297 f.tmol, 4.0 eq.)and HATU ( 42 mg, 111 f.tmol, 1.5 eq.). The solutions werestirred at room temperature for 20 minutes, then combinedand stirred at room temperature for an additional 20 minutesand when the reaction was complete (as determined byLC/MS analysis), the mixture was diluted with water (0.5mL), the pH adjusted to 4 with 10% citric acid, then washedwith EtOAc (2×20 mL). The aqueous phase was discardedand the combined organics were extracted with saturatedaqueous NaCl (10 mL). The aqueous phase was discarded andthe organic phase was dried over Na2S04 , filtered, and concentratedin vacuo, and purified by preparative HPLC to yieldthe title compound (11 mg; purity 99.6% ). LCMS (ESI): calc.C27H31N50 4=489; obs. M+H=490.2. Retention time: 4.23mm.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 16681-70-2.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 16681-65-5, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

The title compound was prepared according to the patent application WO2008/135826. To a 50 mL 2-necked flask containing 1-methyl-1H-1,2,3-triazole (1.0 g, 12.0 mmol, prepared according to PCT Int. Appl., 2008098104) was added THF (45 mL) and the colorless solution was cooled to -40 C. Then, n-BuLi (2.5 M in hexanes, 4.8 mL) was added dropwise which afforded a dark reddish-brown viscous solution. The mixture was stirred between -30 to -20 C. for 45 minutes, then neat DMF (3 mL, 38.5 mmol) was introduced at -10 C. The mixture was allowed to warm up to room temperature and stirred for 60 minutes, followed by pouring into water. The aqueous portion was extracted with EtOAc (4*50 mL) and the combined organics were washed with brine, dried over MgSO4, filtered and concentrated. The aqueous portion was back-extracted with DCM (3*50 mL) and dried as above. The combined organics were concentrated to give a light brown oil that was much more UV active than the starting material. TLC in either 25% CH3CN-DCM or 25% EtOAc-DCM showed the product to have a slightly higher Rf than the starting material. Chromatography on silica gel (100% DCM increasing to 25% CH3CN-DCM) provided the titled material as a colorless oil.

I am very proud of our efforts over the past few months and hope to 1-Methyl-1H-1,2,3-triazole help many people in the next few years.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Pierce, Joan; Goldberg, Steven; Fourie, Anne; Xue, Xiaohua; US2014/107094; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 15294-81-2, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 15294-81-2, name is 4,5-Dibromo-1H-1,2,3-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 160: Preparation of 4,5-dibromo-l-methyl-lH-[1.2.31triazole and 4,5-dibromo- 2-methyl-2H-r 1 ,231triazole(A) (B)To a solution of 4,5-dibromo- IH-[1, 2,3]triazole (2.26 g, 10 mmol) (Example 159) and triethyl amine (1.5 ml, 10 mmol) in dichloromethane (50 ml), was added methyl iodide (625 mul, 10 mmol). The reaction mixture was stirred at room temperature for 24 hours. More triethyl amine (0.75 ml, 5 mmol) and more methyl iodide (312 mul, 5 mmol) were added and the mixture was stirred for 3 hours. The reaction mixture was quenched with aqueous ammonium chloride (saturated, 15 ml). The organic extract was dried over magnesium sulfate and concentrated and the residue was purified by column chromatography on silica gel (eluent 10-30percent ethyl acetate in hexane) to give 4,5-dibromo-2- methyl-2H-[l ,2,3]triazole (isomer B) (625 mg, 26percent yield) and 4,5-dibromo- 1-methyl- IH-[1, 2,3]triazole (isomer A) (825 mg, 34percent yield). Isomer A 1H-NMR (400 MHz, CDCl3): 4.09 (s, 3H, Me) ppm. Isomer B 1H-NMR (400 MHz, CDCl3): 4.18 (s, 3H, Me) ppm.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 4,5-Dibromo-1H-1,2,3-triazole is helpful to your research.

Reference:
Patent; SYNGENTA LIMITED; WO2007/71900; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 1H-[1,2,3]Triazole-4-carboxylic acid

[0833] lH-1,2,3-triazole-4-carboxylic acid (3.8 mg, 34f.tmol)was combined withHATU (12.9 mg, 34 flillOI) inDMF(2 mL) and stirred at room temperature for 15 minutes. Compound3(60mg, 137 f.tmol)andDIPEA(l6f.LL, 92f.tmol)werethen added. The solution was stirred at room temperature for15 minutes, at which time LCMS showed reaction completion.The solvent was removed in vacuo and the crude residuewas purified by reverse phase chromatography to yield Compoundb (18.5 mg) as a TFA salt. MS m/z [M+Hr calc’d forC26H31CIFN50 4 , 532.21. found 532.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 16681-70-2.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics