Month: August 2021

Research speed reading in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 16681-65-5

Intermediate 28: step a tert-butyl 3-(hydroxy(1-methyl-1H-1,2,3-triazol-5-yl)methyl)azetidine-1-carboxylate A 2.5 M solution of -butyllithium in hexanes (9,60 mL, 24.0 mmol) was added dropwise to a stirring solution of 1 -methyl- lH-l ,2,3-triazole (2.00 g, 24.0 mmol, prepared according to PCT Int. Appl., 2008098104) in dry THF (100 mL) at -50 C. The reaction became heterogeneous and yellow during addition. After 15 minutes, a solution of ie/ -butyi 3-formylazetidine-l- carboxylate (4.45 g, 24.0 nimol) in dry THF (10 mL) was added dropwise by syringe. The reaction mixture became homogeneous and was allowed to slowly warm to 0 C. Water (10 mL) and ethyl acetate (100) mL were added. The triphasic mixture was warmed to 23 C. The mixture was partitioned between half-saturated aqueous sodium chloride solution (100 mL) and ethyl acetate (300 mL). The layers were separated. The organic layer was dried with sodium sulfate and the dried solution was filtered. Celite(14 g) was added to the filtrate and the solvents were removed by rotary evaporation to provide a free-flowing powder. The powder was loaded onto a silica gel column. Elution with ethyl acetate initially, grading to 5% methanol- ethyl acetate provided the title compound as a white foam.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 16681-65-5.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C3H3N3O2

1,2,3-Triazole-4-carboxylic acid (14 mg, 124 mumol), DIPEA (86.3 muL, 496 mumol) and HATU (47.1 mg, 124 mumol) were combined in DMF (0.2 mL) and stirred for 5 minutes at room temperature. This was then combined with (2S,4R)-4-amino-5-biphenyl-4-yl-2-hydroxymethyl-2-methyl-pentanoic acid benzyl ester (50 mg, 120 mumol). The resulting mixture was stirred for 15 minutes and the reaction was quenched with AcOH. The product purified by preparative HPLC and lyophilized to yield the title compound (13 mg; purity 95%). MS m/z [M+H]+ calc’d for C29H30N4O4, 499.23. found 499.4.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 1H-[1,2,3]Triazole-4-carboxylic acid help many people in the next few years.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 584-13-4, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 584-13-4, name is 4H-1,2,4-Triazol-4-amine, molecular formula is C2H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Compounds of Formula III 4-([1,2,4]Triazol-4-ylamino)benzonitrile (LWO02023) To a mixture of potassium tert-butoxide (6.7 g, 59.47 mmol) in anhydrous methyl sulfoxide (DMSO, 20 mL) was added at 10-15 C. portionwise a solution of 4-amino-4H-1,2,4-triazole (5.0 g, 59.47 mmol) in anhydrous DMSO (10 mL). After stirring the resulting thick light yellow suspension at room temperature under nitrogen for 60 min, this was cooled to ice/water temperature and a solution of 4-fluorobenzonitrile (3.60 g, 29.74 mmol) in anhydrous DMSO (10 mL) was added dropwise over a period of 5 min. The orange suspension that formed was stirred at room temperature under nitrogen for 1 h before it was poured into water (500 mL). The pH of the clear yellow mixture that formed was brought to neutral by using 5M HCL followed by saturated aqueous sodium bicarbonate solution if required. This mixture was allowed to stand at room temperature uncovered for 7 days at which yellow crystals were deposited. Upon filtration, washings exhaustively with water and air-drying overnight, 4-([1,2,4]triazol-4-ylamino)benzonitrile (2.08 g, 11.23 mmol, 37.8%) was collected; m.p. 200-204 C.; deltaH (400 MHz, DMSO-d6) 6.55 (2H, AA’BB’), 7.69 (2H, AA’BB’), 8.85 (2H, s, C3′-H and C5′-H) and 10.23 (1H, br s, exchanged with D2O, NH).

In the meantime we’ve collected together some recent articles in this area about 4H-1,2,4-Triazol-4-amine to whet your appetite. Happy reading!

Reference:
Patent; Potter, Barry Victor Lloyd; Woo, Lok Wai Lawrence; Purohit, Atul; Reed, Michael John; Sutcliffe, Oliver Brook; Bubert, Christian; US2004/19016; (2004); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 7411-23-6, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 3,5-Dibromo-1,2,4-triazole (1; 658 mg, 2.9 mmol) or 3-chloro-1,2,4-triazole (300 mg, 2.9 mmol), o-quinone methide precursor 2 (2.9mmol), and K2CO3 (1.2 g, 8.7 mmol) were refluxed for 4 h in DMF (10mL). After completion of the reaction, the mixture was cooled, andpoured into H2O (30 mL). The precipitate formed was collected by filtration,washed with H2O, dried, and recrystallized.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 3,5-Dibromo-1H-1,2,4-triazole.

Reference:
Article; Osipov, Dmitry V.; Osyanin, Vitaly A.; Voskressensky, Leonid G.; Klimochkin, Yuri N.; Synthesis; vol. 49; 10; (2017); p. 2286 – 2296;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 1H-[1,2,3]Triazole-4-carboxylic acid

[0794] IH-1,2,3-triazole-5-carboxylic acid (3.4 mg, 30f.tmol) was combined with HATU (II mg, 30 f.tmol) in DMF(0.3 mL) stirred at room temperature for 10 minutes; DIPEA(I eq.) was added and the mixture was stirred for I minute.Compound 2 (10 mg, 30 f.tmol) was dissolved in DMF (0.5mL) and DIPEA (5.2 f.LL, 30 f.tmol) was added, followed byaddition of the activated acid solution. The mixture wasstirred at room temperature for 30 minutes, after which timeLCMS indicated desired product formation. Half of the crudeproduct was purified using reverse phase chromatography toyield Compound a (12.1 mg) as a TFA salt. MS m/z [M+Hrcalc’d for C28H33CIFN50 3 , 542.23. found 542. Half of thecrude product was used in the next step without purification.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 16681-70-2, and we look forward to future research findings.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 4928-88-5, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 4928-88-5, name is Methyl 1H-1,2,4-triazole-3-carboxylate, molecular formula is C4H5N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of [LH-[1,] 2,4] triazole-3-carboxylic acid methyl ester (3.0 g, 0.23 mol) in [N, N-DIMETHYLFORMAMIDE] (76 mL) at [25 oC] was treated with triphenylmethylchloride (7.2 g, 0.23 mol) and triethylamine (6.41 mL, 0.23 mol). The reaction mixture was stirred at [25 oC] for 4 days and then diluted with ethyl acetate. The mixture was then washed with a dilute aqueous hydrochloric acid solution. At this time, methanol was added to the organic layer. A precipitate formed and was removed by filtration. The organics were further washed with a saturated aqueous sodium chloride solution, dried over magnesium sulfate, filtered, and concentrated in vacuo. The resulting solid was triturated with diethyl ether. The solid was collected by filtration and washed again with diethyl ether to afford 1-trityl-1H-[1, 2,4] triazole-3-carboxylic acid methyl ester as a white solid (2.45 g, 84percent) which was used without further purification.A solution of 2, 2-dimethyl-propionic acid 8- (4-acetylamino-benzyl)-3-butyl-2, 6- dioxo-1, 2,3, 6-tetrahydro-purin-7-ylmethyl ester (104 mg, 0.22 mmol) in acetonitrile (2.0 mL) was treated with [1,] 8-diazabicyclo [5.4. 0] [UNDEC-7-ENE] (0.03 mL, 0.24 mmol) and [2-BROMOMETHYL-1-FLUORO-4-NITRO-BENZENE] (56.6 mg, 0.24 mmol). The resulting solution was heated to [50 oC FOR] 6 h. At this time, another portion of 1,8- diazabicyclo [5. [4 : 0] UNDEC-7-ENE] (0.03 mL, 0.24 mmol) was added. The reaction was stirred at [25 oC] for 18 h. At this time, the reaction was poured into ethyl acetate (200 mL) and was washed with a 1N aqueous hydrochloric acid solution [(1] x 50 mL) and a saturated aqueous sodium chloride solution [(1] x 50 mL). The organics were dried over magnesium sulfate, filtered, and concentrated in vacuo. Flash chromatography (Merck Silica gel 60,230-400 mesh, 1: 1 ethyl acetate/petroleum ether) afforded 2,2- dimethyl-propionic acid 8- (4-acetylamino-benzyl)-3-butyl-1- (2-fluoro-5-nitro-benzyl)- 2, [6-DIOXO-1,] 2,3, 6-tetrahydro-purin-7-ylmethyl ester (45.3 mg, 33percent) as a tan solid

I am very proud of our efforts over the past few months and hope to Methyl 1H-1,2,4-triazole-3-carboxylate help many people in the next few years.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; WO2003/106459; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 7411-23-6, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

P-methoxybenzyl chloride (759.55 mg) was added to an acetonitrile mixture (10 ml) of a compound WX080-1(1.1 g), N,N-diisopropyl ethylamine (1.25 g) and potassium iodide (402.55 mg). The resulting mixture was reacted at 80C for 2 hours. The reaction solution was spin-dried, and the resulting product was diluted with 100 ml of ethyl acetateand washed with water (20 ml 3 2). The organic phase was dried with anhydrous sodium sulfate, filtered and spin-driedto obtain the compound WX080-2. ESI m/z: [M-H]+= 348.1.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 3,5-Dibromo-1H-1,2,4-triazole.

Reference:
Patent; Shandong Danhong Pharmaceutical Co., Ltd.; LUO, Zhi; LI, Xiaolin; YANG, Yaxun; YANG, Lele; LI, Peng; HE, Haiying; LI, Jian; CHEN, Shuhui; (155 pag.)EP3626699; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 41253-21-8, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

(2) Prepare a thermometer, a condenser,Add 250 ml of DMF and 1,2,4-triazole sodium salt (18.5 g 203 mmol) to a 250 ml four-neck reaction flask of a stirrer.Add 1-chloro-2-(4-chlorophenyl)-3-cyclopropylbutan-2-ol (44 g, 170 mmol),Heat to 100 C, reaction 60 ~ 100min, sample analysis,When the content of 1-chloro-2-(4-chlorophenyl)-3-cyclopropylbutan-2-ol is less than 1%,It is considered as the end of the reaction. Cool to room temperature,The reaction droplets were added to 120 ml of cold water.The precipitated solid was stirred, filtered, washed with water, dried.A cyproconazole having a content of 96% was obtained in a weight yield of 90%.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about Sodium 1,2,4-triazol-1-ide, hurry up and to see.

Reference:
Patent; Huai’an Guorui Chemical Co., Ltd.; Zhang Pu; Li Ming; Jin Yucun; Chen Chao; Zhong Yu; Chen Mingguang; Wang Fengyun; (8 pag.)CN109400542; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 23579-79-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 23579-79-5, name is 3,5-Dibromo-1-methyl-1H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

a) 5-Bromo-2-methyl-2H-[ 1 ,2,4]triazole-3-carbaldehyde To a solution of 3,5-dibromo-l-methyl-lH-l,2,4-triazole (500 mg, 2.08 mmol, Eq: 1.00) in tetrahydrofuran (5 ml) was added dropwise at -45 C under argon atmosphere n-butyllithium 1.6 M in hexane (1.56 ml, 2.49 mmol, Eq: 1.2). The resulting mixture was stirred for 30 minutes at -45C and was then cooled to -70C. Then dimethyl formamide (197 mg, 209 mu, 2.7 mmol, Eq: 1.3) wass added dropwise. After 15 minutes the cooling bath was removed and the mixture was allowed to reach 25 C. The mixture was stirred for additional 2 hours at 25 C. The mixture was poured on water and extracted twice with ethyl acetate, the organic layers were combined, washed with water and brine, dried over magnesium sulfate, filtrated and evaporated, affording 5-bromo-2-methyl-2H-[l,2,4]triazole-3-carbaldehyde (218 mg / 55.3 %) as an orange semi solid. MS: m/e= 189 (M+H+)

In the meantime we’ve collected together some recent articles in this area about 3,5-Dibromo-1-methyl-1H-1,2,4-triazole to whet your appetite. Happy reading!

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; FLOHR, Alexander; GROEBKE ZBINDEN, Katrin; KUHN, Bernd; LERNER, Christian; RUDOLPH, Markus; SCHAFFHAUSER, Herve; WO2013/178572; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A suspension of NAOH (37.86 g, 946.5 mmol), sodium iodide (94.65 g, 631.5 mmol) and 1H- [1, 2, 3] triazole (61.03 g, 883.6 mmol) in 2-methyl-2-butanol (750 mL) was refluxed for 1 h under an inert atmosphere. After cooling to room temperature the methane sulfonate (94.18 g, 631.2 mmol) was added within 5 minutes. The resulting suspension was then heated to reflux for 3 h, cooled to room temperature and concentrated in vacuo at 45 C. Water (500 mL) and dichloro methane (1 L) were added and the organic phase was separated, dried over sodium sulfate and the volatiles removed at 30 C. The residue was distilled at 1 mmHg. A forerun was collected at 20-70 C. The main fraction distilled at 123-129C as a colourless, turbid liquid. After filtration over Celite 1- BUT-3-YNYL-IH- [1, 2,3] triazole was obtained as a colourless liquid (29.77 g, 38.9 %). ‘H-NMR (CDCL3) 8 : 2.05 (t, 1H), 2.75 (dt, 2H), 4.5 (t, 2H), 7.65 (s, 1H), 7.7 (s, 1H).

This is the end of this tutorial post, and I hope it has helped your research about 288-36-8!

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; WO2004/96796; (2004); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics