Day: August 9, 2021

Synthetic Route of 4928-87-4, New Advances in Chemical Research in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: Single crystals of 1 were prepared by a branched tube method [34], 1H-1,2,4-triazole-3-carboxylic acid (0.117 g, 1 mmol), lead(II) nitrate (0.331 g, 1 mmol) and potassium bromide (0.119 g, 1 mmol) were placed in the bottom main of a branched tube. Water was carefully added to fill both arms, and then the arm to be heated was placed in oil bath at 60 C. After 7 days, colorless crystals were deposited in the cooler arm which were filtered off, washed with water and air dried. (0.225 g, yield 54%),

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 4928-87-4.

Reference:
Article; Safarifard, Vahid; Morsali, Ali; Inorganica Chimica Acta; vol. 405; (2013); p. 203 – 208;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 16681-70-2, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

[0664] To a solution of 3H-[1,2,3]triazole-4-carboxylicacid (77 mg, 688 flillOl) and HATU (130 mg, 344 f.tmol) inDMF (1.5 mL) was added DIPEA (160 f.LL, 920 flillOl). Themixture was stirred at room temperature for 20 minutes, followedby the addition of Compound 11 (140 mg, 210 f.tmol).The mixture was stirred at room temperature for 20 minutes,then the reaction was quenched with 10% aqueous citric acid(15 mL) to pH 4. The mixture was extracted with EtOAc(3×20 mL ), washed with saturated aqueous NaCl (1 0 mL) anddried over MgS04 . The mixture was filtered and the filtratewas evaporated. The residue was purified by flash chromatography(10-100% hexanes/EtOAc gradient over 45 minutes).The fractions containing the desired product were combinedand evaporated. The residue was dried in vacuo at roomtemperature overnight to yield Compound 12 (70 mg). LCMS(ESI): calc. C33H33ClFN50 5 =634.1; obs. rn/z 634.2[M+Ht. Retention time 5.96 min.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-[1,2,3]Triazole-4-carboxylic acid.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 15294-81-2, name is 4,5-Dibromo-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C2HBr2N3

Example 121: Preparation of 4,5-dibromo-l-methyl-lH-[l,2,3″|triazole and 4,5-dibromo- 2-methyl-2H-[l .2.31triazole(A) (B) To a solution of 4,5-dibromo- IH-[1, 2,3]triazole (2.26 g, 10 mmol) (Example 120) and triethyl amine (1.5 ml, 10 mmol) in dichloromethane (50 ml), was added methyl iodide (625 mul, 10 mmol). The reaction mixture was stirred at room temperature for 24 hours. More triethyl amine (0.75 ml, 5 mmol) and more methyl iodide (312 mul, 5 mmol) were added and the mixture was stirred for 3 hours. The reaction mixture was quenched by addition of aqueous ammonium chloride (saturated) (15 ml). The phases were separated and the organic phase was dried over magnesium sulfate and concentrated. The residue was purified by column chromatography on silica gel (eluent: 10-30% ethyl acetate in hexane) to give 4,5-dibromo-2-methyl-2H-[l,2,3]triazole (isomer B) (625 mg, 26% yield) and 4,5-dibromo- 1 -methyl- IH-[1, 2,3]triazole (isomer A) (825 mg, 34% yield).Isomer A 1H-NMR (400 MHz, CDCl3): 4.09 (s, 3H, Me) ppm. Isomer B 1H-NMR (400 MHz, CDCl3): 4.18 (s, 3H, Me) ppm.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 15294-81-2

Reference:
Patent; SYNGENTA LIMITED; WO2007/96576; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 584-13-4, name is 4H-1,2,4-Triazol-4-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 584-13-4

5-(4J-l,2,4-Triazol”4-ylamino)-4I-(beiizyIoxy)biphenyl-2-carbonitriIe (CAB06050)To a solution of 4/?-l,2,4-triazol-4-amine (2.439 g, 29.01 mmol) in DMSO (50 mL) was added KOtBu (336 g, 30.0 mmol). The mixture was stirred for 0.5 hours at room temperature before CAB06Theta48 (4.40 g, 14.51 mmol) was added and stirring was continued for 1 hour. The mixture was poured into crashed ice and neutralized with 2M BCHSO4 solution. The precipitate was filtered off and recrystallised from EtOAc/«-hexane to give CAB06050 (5.07 g, 85%) as fine colorless needles. Mp. 180-182 0C; 1H NMR (400 MHz, DMSO-rftf) delta 5.17 (s, 2H)5 6.47 (d, J = 2.4 Hz5 IH), 6.54 (dd, J = 8.6, 2.4 Hz, IH)5 7.15 (AA’BB’, 2H), 732-7.50 (m, 7H)5 7.78 (d, J= 8.6 Hz, IH), 8.86 (s, 2H), 10.28 (S5 IH); 13C NMR (100.6 MHz5 DMSO-rf*) delta 69.4, 101.2, 111.0, 1123, 115.0, 119.1, 127,8, 127.9, 128.5, 129.7, 130.2, 135.6, 136.8, 144.1, 146.0, 150.8, 158.9; LRMS (ES+): m/z 368,2 (100%, [M+H]+); HRMS (ES+) calcd for C22H18N5O [M+H]+: 368.1506, found 368.1494.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 4H-1,2,4-Triazol-4-amine, in my other articles.

Reference:
Patent; STERIX LIMITED; WOO, Lok Wai Lawrence; BUBERT, Christian; WOOD, Paul Michael; PUTEY, Aurelien; PUROHIT, Atul; POTTER, Barry Victor Lloyd; WO2011/23989; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 1-Methyl-1H-1,2,3-triazole

Intermediate 45: Step a (2,4-Dimethylthiazol-5-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanol To a flask containing 1-methyl-1H-1,2,3-triazole (1.60 g, 19.3 mmol, Intermediate 42, step a) was added THF (200 mL) and the solution was cooled to -40 C. To this colorless homogeneous solution was added n-BuLi (2.5 M in hexanes, 7.7 mL, 19.2 mmol) dropwise which immediately afforded a dark brown viscous mixture. The mixture was kept between -10 to -20 C. for 60 min, then 2,4-dimethylthiazole-5-carbaldehyde (3.03 g, 21.5 mmol) in THF (5 mL) was introduced and the reaction mixture began to stir much more easily, but still remained brownish. Once the aldehyde was added the reaction was placed in an ice-bath and maintained there until it warmed to room temp. After 3 hours the reaction was quenched by pouring into a saturated solution of NH4Cl at room temperature. The aqueous portion was extracted with EtOAc (5*100 mL). The combined organics were washed with brine, dried over MgSO4, filtered and concentrated to give a brown oil-foam. Flash chromatography on silica gel (10-30% acetone increasing gradient to 10% MeOH-DCM) gave the title compound as a light orange foam.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 16681-65-5

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Mirzadegan, Taraneh; Ganamet, Kelly; US2014/107097; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 288-88-0, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 288-88-0, name is 1H-1,2,4-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 1; Preparation of l-(4-NitrophenylmethyI)-l,2,4-triazole (i); Preparation of sodium triazole dihydrate; Into a IOOL glass flask were charged 50L of isopropanol and 2.9kg of sodium hydroxide flakes. The reaction mass was heated to 70C. After maintaining for 30min at same temperature lH-l,2,4-triazole (5.0kg) was added to the reaction mass. The reaction mass was maintained at reflux temperature for lhr. Slowly cooled the reaction mass to 30C and maintained for 3hr. The reaction mass was filtered and the wet cake washed with 5L of isopropanol. The wet material was dried at 600C until a constant weight is reached. Yield of sodium 1,2,4-triazole is 6.5kg.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,4-Triazole.

Reference:
Patent; NATCO PHARMA LIMITED; PULLA REDDY, Muddasani; SATYASRINIVAS, Hanumara; RADHARANI, Kagitha; VENKAIAH CHOWDARY, Nannapaneni; WO2006/137083; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 4928-87-4, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of intermediate 27b (0.26 g, 0.58 mmol) in 15 ml of DMF was added EDCI (0.17 g, 0.89 mmol)(0 · 12g, 0 · 89mmo 1) After stirring and dissolving, 1H-1,2,4-triazole-3-carboxylic acid (0.55 g, 0.44 mmo 1)DIEA 0.2ml (1.17mmol), stirring at room temperature for 12h, TLC detection, the end of the reaction, the liquid spinning was crude, crude by silica gel GColumn chromatography [eluent (methanol: dichloromethane) = 50: 500 (nu: nu)] to give 0.1 g of the title compound of Example 34,Yield: 30.3%

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1,2,4-Triazole-3-carboxylic acid.

Reference:
Patent; Beijing Foreland Pharma Co., Ltd; Zhang, Xingmin; Wang, Ensi; Niu, Shengxiu; Guo, Jing; Dai, Zhuolin; Zheng, Nan; Ji, Qi; Li, Qinyan; Liang, Tie; (109 pag.)CN104411706; (2016); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 1H-1,2,4-Triazol-5-amine

General procedure: 20 mg of gamma-Fe2O3Ph-PMO-NaHSO4 was added to a roundbottomflask containing an aromatic aldehyde (1 mmol), 3-amino-1,2,4-triazole 2 (1.0 mmol), b-diketones (dimedone 3, 1,3-cyclohexadione 4 or ethyl acetoacetate 5) (1.0 mmol) and stirredunder solvent-free conditions at 100 C in certain times. Meanwhile,the progress of the reactionwas indicated by TLC (n-hexane:ethyl acetate; 7:3). With completing the reaction, 3ml ethanol waspoured and the magnetic nanocomposite was separated in thepresence of a magnetic stirring bar; the reaction mixture becameclear. The crude product was recrystallized from ethanol to give thepure product. The pure products were characterized by conventionalspectroscopic methods. Physical and spectral data for theselected compounds are represented below.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 61-82-5, and we look forward to future research findings.

Reference:
Article; Haghighat, Mahdieh; Shirini, Farhad; Golshekan, Mostafa; Journal of Molecular Structure; vol. 1171; (2018); p. 168 – 178;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 2-(2H-1,2,3-Triazol-2-yl)benzoic acid

EXAMPLE 2 (2-(2H- 1 ,2,3-triazol-2-yl)phenyl)(4-(4,6-dimethylpyrimidin-2-yl)- 1 ,4-diazepan- 1 -yl)methanone To a solution of l-(4,6-dimethylpyrimidin-2-yl)-l,4-diazepane hydrochloride 1-2 (1.4 g, 5.2 mmol), 2-(2H-l,2,3-triazol-2-yl)benzoic acid Int E (1.1 g, 5.7 mmol), EDC (1.5 g, 7.8 mmol), and l-hydroxy-7-azabenzotriazole (1.1 g, 7.8 mmol) in DMF (10 mL) was added DIPEA (4.5 mL, 26 mmol) and the mixture was stirred at room temperature for 16 h. The solvent was concentrated in vacuo and the crude residue was redissolved in DCM and purified by silica gel chromatography (100% hexanes, 2 min; 0-100% EtOAc/hexanes, 20 min; 100% EtOAc, 4 min) to provide Example 2 (1.5 g) as a white solid. MS (ESI) m/z: 378.4 (M+H).

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 2-(2H-1,2,3-Triazol-2-yl)benzoic acid help many people in the next few years.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; REGER, Thomas, S.; ROECKER, Anthony, J.; WO2015/95111; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 16681-70-2, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

(25,^5)-4-Amino-54jiphenyl-4-yl-2-methoxymethylpentanoic acid ethyl ester (16 mg, 47 muiotaetaomicron) was dissolved in DMF (0.3 mL). lH-l,2,3-Triazole-4-carboxylic acid (5.3 mg, 47 muiotaetaomicron) and HATU (18 mg, 47 muiotaetaomicron) were added followed by DIPEA (25 mu, 141 muetaiotaomicron). The mixture was stirred for 30 minutes and concentrated under reduced pressure to yield Compound 1, which was used in the next step without purification.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1H-[1,2,3]Triazole-4-carboxylic acid, hurry up and to see.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; FLEURY, Melissa; BEAUSOLIEL, Anne-Marie; HUGHES, Adam D.; LONG, Daniel D.; WILTON, Donna A.A.; WO2015/116786; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics