Day: August 17, 2021

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 184177-83-1, name is 1-((2S,3S)-2-(Benzyloxy)pentan-3-yl)-4-(4-(4-(4-hydroxyphenyl)piperazin-1-yl)phenyl)-1H-1,2,4-triazol-5(4H)-one belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 184177-83-1

10 g of compound of formula A and 76 mL DMSO were added into a reaction flask at room temperature, and stirred until clarification. An alkaline solution previously prepared from 1.4 g sodium hydroxide and 6 g water was further added thereto. The mixture was stirred for 1 h. Then, 10 g of compound of formula IX was added thereto. The mixture was warmed up to 38 C. and reacted for 16 h. After the reaction was completed, the mixture was warmed up to 45 C. 6 mL water was added thereto. The mixture was stirred for 30-60 min. 154 mL water was further added thereto. The mixture was stirred for 1 h, and filtered under suction. The resultant solid was drip washed with 4×50 mL purified water to obtain a wet product. (0249) The wet product and 60 mL of 90% aqueous ethanol solution were added to a reaction flask, warmed up to 65 C., and stirred. After clarification, 1.5 g active carbon was added thereto. The mixture was stirred for 15 min, filter-pressed while hot, and washed with 15 mL of 90% aqueous ethanol solution. Then, the filtrate was warmed up to 65 C., stirred, cooled to 40-45 C. after clarification, crystallized while keeping the temperature for 1 h, further cooled to 0-5 C., crystallized while keeping the temperature for 1 h, and filtered under suction. The resultant solid was first drip washed with 5 mL of 50% aqueous ethanol solution, and then drip washed with 4×50 mL purified water. The solid was collected, placed in a ventilated oven at 50-55 C. and dried for 16 h to obtain 13.2 g of product.

If you are hungry for even more, make sure to check my other article about 184177-83-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Zhejiang Ausun Pharmaceutical Co., Ltd.; Zheng, Zhiguo; (23 pag.)US2019/71408; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 3641-08-5, name is 2H-1,2,4-Triazole-3-carboxamide belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 3641-08-5

General procedure: Ribavirin biosynthesis was assayed using 5 × 109 colony-forming units (CFU) in 1 mL sodium phosphate buffer (30 mM, pH7.0) containing equimolar concentrations of uridine (Urd) and TCA(2.5 mM). Reactions were performed at 60C and 200 rpm in aperiod of 16 h.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 2H-1,2,4-Triazole-3-carboxamide help many people in the next few years.

Reference:
Article; De Benedetti, Eliana C.; Rivero, Cintia W.; Trelles, Jorge A.; Journal of Molecular Catalysis B: Enzymatic; vol. 121; (2015); p. 90 – 95;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 288-36-8, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Intermediate 14f (0556) 4,5-Dibromo-lH-triazole (0557) Br2 (930 g, 5.82 mol) was added dropwise to a stirred solution of lH-triazole (300.00 g, 4.34 mol, 252.10 mL) in H20 (2 L) at 40 to 45 °C. The resulting solution was stirred for a further 1 hour. The precipitate was filtered off and further Br2 (617.28 g, 3.86 mol) was added to the filtrate, then it was kept at 25 °C for 16 hours. A second precipitate was filtered off. The combined filtered off solids were washed with water (1 L x 3), dried under vacuum and re-crystallized from MeOH (-400 mL) to give 4,5-dibromo-lH-triazole (Intermediate 14f; 890 g, 90.39percent yield) as an off-white solid, m/z (ES+) [M+H]+ (0558) 226/228/230.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1H-1,2,3-Triazole is helpful to your research.

Reference:
Patent; ASTRAZENECA AB; WARD, Richard, Andrew; JONES, Clifford, David; FERON, James, Lyman; (80 pag.)WO2017/80980; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 16681-70-2, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a stirred solution of 11-3 (0.2g, 0.36mMol), HOBT (0.05g, 0.4mMol), and IH-1, 2,3- triazole-4-carboxylic acid (0.05g, 0.4mMol) in anhydrous DMF (2mL) was added DIEA (0.18mL, 1. ImMoI) followed by EDC (0.08g, 0.4mMol). The solution was heated in the microwave reactor for 30 minutes at 800C. Solution was then treated with 0.5mL of acetic acid and was heated to 800C in the microwave reactor for lOmin. Upon cooling to room temperature, the solution was passed through a EPO syringe filter and purified on a C18 reverse phase HPLC to give 11-4 as a solid. Mass (M+l) calculated: 632.2742 observed: 632.274

We very much hope you enjoy reading the articles and that you will join us to present your own research about 16681-70-2, Happy reading!

Reference:
Patent; MERCK & CO., INC.; WO2006/135627; (2006); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 1001401-62-2, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of (3R, 6R)-6-methylpiperidin-3-ol (5.31 g, 46.1 mmol), 2-(2H-l,2,3- triazol-2-yl)benzoic acid (10.5 g, 55.3 mmol), EDC (17.7 g, 92.0 mmol), l-hydroxy-7- azabenzotriazole (12.6 g, 92.0 mmol), and triethylamine (19.3 mL, 138 mmol) in DMF (300 mL) was stirred at 50 C overnight, then diluted with saturated aqueous sodium bicarbonate and extracted 3x with ethyl acetate. The organics were washed with brine, dried over magnesium sulfate, filtered, and concentrated. The crude material was purified by silica gel gradient chromatography (0-100% ethyl acetate in hexanes), providing the titled compound as a pale yellow solid. LRMS m/z (Mu+Eta) 287.3 found, 287.1 required.

I am very proud of our efforts over the past few months and hope to 2-(2H-1,2,3-Triazol-2-yl)benzoic acid help many people in the next few years.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; SKUDLAREK, Jason, W.; WO2014/137883; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 16681-65-5, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a flask containing 1-methyl-1H-1,2,3-triazole (275 mg, 3.31 mmol) was added THF (10 mL) and the solution was cooled to -45 C. using a CH3CN-CO2 bath. n-BuLi (2.5 M in hexanes, 1.4 mL, 3.5 mmol) was added dropwise which afforded an opaque white suspension. The mixture was stirred at -43 C. for 20 minutes, then a homogeneous solution of (4-chloro-3-isobutyl-2-methoxyquinolin-6-yl)(1,2-dimethyl-1H-imidazol-5-yl)methanone (550 mg, 1.48 mmol, Intermediate 65) in 3 mL THF was introduced. After 10 minutes, the reaction flask was then placed in an ice-water bath. The reaction mixture was quenched after 30 minutes with aqueous NH4Cl solution and the aqueous portion was extracted with EtOAc (4*30 mL) and EtOAc:THF (1:1, 30 mL). The combined organics were washed with brine, dried over MgSO4, filtered and concentrated. Chromatography on silica gel (5% MeOH-DCM increasing to 10% MeOH-DCM) provided the title compound as a tan amorphous solid. 1H NMR (400 MHz, CD3OD) delta 8.19 (d, J=2.1 Hz, 1H), 7.85 (d, J=8.7 Hz, 1H), 7.52 (dd, J=8.7, 2.2 Hz, 1H), 7.17 (s, 1H), 6.11 (s, 1H), 4.09 (s, 3H), 3.98 (s, 3H), 3.47 (s, 3H), 2.85 (d, J=7.3 Hz, 2H), 2.37 (s, 3H), 2.11 (hept, J=6.9 Hz, 1H), 0.96 (d, J=6.6 Hz, 6H). MS (ESI): mass calcd. for C23H27ClN6O2, 454.2. m/z found 455.0 [M+H]+. The racemate was separated by chiral SFC (Stationary phase: CHIRALPAK AD-H 5 mum, 250×30 mm, Mobile phase: 70% CO2, 30% mixture of MeOH/iPrOH 50/50 v/v (+0.3% iPrNH2)), to give Example 134b as the first compound that eluted from the chiral column and Example 134c as the second compound that eluted from the chiral column.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1-Methyl-1H-1,2,3-triazole is helpful to your research.

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 2-(2H-1,2,3-Triazol-2-yl)benzoic acid

Step C: (2-(2H-1,2,3-triazol-2-yl)phenyl)((1S,4S,6R)-6-((5-(trifluoromethyl)pyridin-2-yl)amino)-2-azabicyclo[2.2.1]heptan-2-yl)methanone To the title compound of step B (30 mg) and intermediate A-1 (19 mg, 0.10 mmol) in DMF (1 mL) was added DIPEA (94 muL, 0.55 mmol) and HATU (38 mg, 0.10 mmol), and the reaction mixture was stirred at room temperature for 1 h. The reaction was quenched by the addition of H2O and the aqueous layer was extracted with 4:1 EtOAc/hexanes (3*). The combined organics were washed with H2O, 5% aqueous LiCl, brine, dried with Na2SO4, filtered, and concentrated. Purification via silica gel chromatography (25-100% EtOAc (with 10% MeOH) in hexanes) gave the title compound (20 mg). MS (ESI) mass calcd. C21H19F3N6O, 428.2; m/z found 429.1 [M+H]+. 1H NMR (400 MHz, DMSO-d6, Compound presents as a mixture of rotamers, major rotamer reported) delta 8.10 (s, 2H), 7.94-7.77 (m, 1H), 7.70 (d, J=8.1 Hz, 1H), 7.67-7.49 (m, 2H), 7.28 (td, J=7.7, 1.5 Hz, 1H), 6.96-6.82 (m, 1H), 6.77-6.56 (m, 2H), 3.96 (br. s, 1H), 3.64 (br. s, 1H), 3.33-3.25 (m, 1H), 3.23-3.14 (m, 1H), 2.15-2.00 (m, 1H), 1.44-1.33 (m, 1H), 1.23-1.03 (m, 2H), *1H buried under DMSO-d6 peak.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 1001401-62-2.

Reference:
Patent; Janssen Pharmaceutica NV; GELIN, Christine F.; LEBOLD, Terry P.; SHIREMAN, Brock T.; US2014/275118; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 22300-52-3, name is 4,5-Dibromo-2H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

The reactionmixture of 4,5-dibromo-2H-1,2,3-triazole (100 mg, 0.44 mmol) and sulfuric acid(17.8 M, 0.025 mL) in tert-butanol (2.5 mL) was heated to 80 °C overnight. The reaction mixture was dilute with EtOAc and was carefully quenched with saturated aqueous NaHCO3. The two layers were separated and the aqueous layer was further extracted with EtOAc. The combined organic layers were washed withbrine, dried (over Na2SO4), filtered and concentrated in vacuo. The residue was purified by silica gel column chromatography (0-100percent EtOAc/hexanes) to give the product.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 22300-52-3

Reference:
Patent; GILEAD SCIENCES, INC.; CAI, Zhenhong R.; CHO, Aesop; BUENROSTRO, Ana Zurisadai Gonzalez; HAN, Xiaochun; JABRI, Salman Y.; MCFADDEN, Ryan; QI, Yingmei; VOIGT, Johannes; YANG, Hong; XU, Jie; XU, Lianhong; (545 pag.)WO2019/75291; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7170-01-6, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: TBHP (3 eq.) was added to a solution of 3-phenyl-1,2,4-triazole (0.4 mmol) 1a, benzaldehyde 2a (0.6 mmol), followed by TBAI (20 mol%) in DCE(4 mL). The reaction mixture was stirred at 120 oC under nitrogen atmosphere for 5 h. After completion of the reaction confirmed by TLC, the reaction mixture was cooled to room temperature and partitioned between water and ethyl acetate. The organic and aqueous layers were then separated and aqueous layer was extracted with ethyl acetate twice. The combined organic extracts were dried over anhydrous Na2SO4 and concentrated under reduced pressure to afford the crude. The crude was further purified by silica gel chromatography using EtOAc/hexane as eluents to furnish the desired product 3 or 5.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 3-Methyl-1H-1,2,4-triazole.

Reference:
Article; Agisho, Habtamu Abebe; Esatu, Habdolo; Hairat, Suboot; Zaki, Mehvash; Tetrahedron Letters; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 956317-36-5

Example 5: Preparation of Compound 5 (S)-(5-methyl-2-(2H-1,2,3-triazol-2-yl)phenyl)(5-(((5-(trifluoromethyl)pyridin-2-yl)amino)methyl)-6-azaspiro[2.5]octan-6-yl)methanone; [Show Image] 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid (1eq; prepared according to WO 2008147518), HOBT (1 eq) and EDCl.HCl (1.5eq) dissolved in dichloromethane (5ml/mmol) were stirred at 25C for 0.5-2hours, then intermediate 2 (1 eq) dissolved in dichloromethane was added. After 18 hours the mixture was poured in an aqueous saturated solution of NaHCO3 and extracted with dichloromethane. The crude was purified by silica gel column chromatography (DCM to DCM/MeOH = 9/1) to obtain the title compound with yield of 52%. 1 HNMR (CDCl3) delta ppm 8.22-8.38 (m, 1 H), 7.94-8.14 (m, 1 H), 7.79-7.86 (m, 1 H), 7.69 (m, 1 H), 7.50-7.62 (m, 1 H), 7.28-7.37(m, 1 H), 7.0-7.24(m, 1 H), 6.48-6.66 (m, 1 H), 5.20(m, 1 H), 4.34-4.84 (m, 1 H), 3.89-4.0 (m, 1 H),3.65-3.75 (m, 1 H), 3.21-3.44 (m, 2H), 3.01-3.11 (m, 1 H), 2.26-2.46 (m, 3H), 1.89-2.17 (m, 1 H), 1.02-1.28 (m, 1 H), 0.19-0.63(m, 4H) MS= ESI + m/z 439 [M+H]+

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 956317-36-5.

Reference:
Patent; ROTTAPHARM S.P.A.; EP2484674; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics