Day: August 18, 2021

Synthetic Route of 1001401-62-2, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step (vii): tert-Butyl N-{4-[(4-methoxyphenyl)methoxy]-2-[2-(2H-1,2,3-triazol-2-yl)benzamido]cyclopentyl}carbamate To a solution of tert-butyl N-{2-amino-4-[(4-methoxyphenyl)methoxy]cyclopentyl}-carbamate (1.71 g, 5.08 mmol) in dry DMF (17 ml) was added 2-(2H-1,2,3-triazol-2-yl)benzoic acid (CAS number 1001401-62-2; 1.06 g, 5.59 mmol), HATU (2.90 g, 7.62 mmol) and triethylamine (2.13 ml, 15.25 mmol). The reaction was stirred at room temperature for 72 hours then partitioned between ethyl acetate and water. The organics were washed with brine, dried over magnesium sulfate, filtered and concentrated in vacuo. The crude material was purified by column chromatography (silica, 0-100% ethyl acetate petrol) to afford the title compound. 1H NMR (400 MHz, DMSO-d6) delta ppm 1.37 (s, 9H), 1.46-1.59 (m, 1H), 1.58-1.77 (m, 1H), 1.86-1.97 (m, 1H), 2.18-2.37 (m, 1H), 3.67-3.79 (m, 4H), 3.83-4.01 (m, 2H), 4.32 (s, 2H), 6.85-6.95 (m, 2H), 7.17-7.31 (m, 2H), 7.44-7.54 (m, 2H), 7.55-7.66 (m, 1H), 7.76 (s, 1H), 7.96-8.05 (m, 2H) MS ES+: 508

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 1001401-62-2.

Reference:
Patent; Takeda Pharmaceutical Company Limited; Fieldhouse, Charlotte; Glen, Angela; Maine, Stephanie; Fujimoto, Tatsuhiko; Robinson, John Stephen; US2015/232460; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 16681-70-2, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

lH-l,2,3-triazole-4-carboxylic acid (2.3 mg, 20 muiotaetaomicron) was combined with HATU (7.7 mg, 20 muiotaetaomicron) in DMF (2 mL) and stirred at room temperature for 15 minutes. Compound 3 (8 mg, 18 muiotaetaomicron) and DIPEA (9.6 mu^, 55 muiotaetaomicron) were then added. The solution was stirred at room temperature for 15 minutes, at which time LCMS showed reaction completion. The solvent was removed in vacuo and the crude residue was dissolved in EtOH (2 mL). A solution of IN LiOH (183 mu,, 183 muiotaetaomicron) in water was added, and the resulting solution was stirred at room temperature for 30 minutes, at which time LCMS showed reaction completion. The solvent was removed in vacuo and the crude residue was purified by reverse phase chromatography to yield Compound a (3 mg) as a TFA salt. MS m/z [M+ + calc’d for C24H27CIFN5O4, 504.17; found 504.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1H-[1,2,3]Triazole-4-carboxylic acid, hurry up and to see.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; FLEURY, Melissa; BEAUSOLIEL, Anne-Marie; HUGHES, Adam D.; LONG, Daniel D.; WILTON, Donna A.A.; WO2015/116786; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7343-34-2, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 7343-34-2, name is 3,5-Dimethyl-4H-1,2,4-triazole, molecular formula is C4H7N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

(c) Preparation of 1-decyl-3,5-dimethyl-1,2,4-triazole A mixture of 3,5-dimethyl-1,2,4-triazole (6.0 parts; 0.062 mol ex (b) above) and 1-bromodecane (14.4 parts; 0.065 mol) in dimethylformamide (16 ml) was heated together at 120° C. for 23 hours. The cooled reaction mixture was diluted with water (100 ml), a solution of sodium hydroxide (2.62 parts; 0.065 mol) in water (100 ml) added, and the product extracted into ether (3*50 ml). After drying over magnesium sulphate the solution was evaporated to yield a pale yellow oil (3.3 parts; 22percent theory). Infra red analysis: vmax (film): 2923, 2853, 1515, 1341, 701cm-1. Proton NMR: delta(CDCl3; 0.9(t,3H); 1.2-1.4(m,14H); 1.7-1.9(m,2H); 2.3(s,3H); 2.4(s,3H); 4.0(t,2H)ppm. Mass spec: m/z(Br): 238(M+H+, 100percent).

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 3,5-Dimethyl-4H-1,2,4-triazole, hurry up and to see.

Reference:
Patent; Zeneca Limited; US5620595; (1997); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 3641-13-2, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 3641-13-2, name is 5-Amino-4H-1,2,4-triazole-3-carboxylic acid, molecular formula is C3H4N4O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of 3-amino-1,2,4-triazole-5-carboxylic acid (ATZAc)(49.41 g, 385.7 mmol) in anhydrous dimethylformamide (300 mL)was added over a period of 50 min to a stirred solution of POSS-PrCl(25 g, 24.11 mmol) in 300mL of DMF. The temperaturewas allowedto rise to 160 C and stirring was continued for 48 h resulting in awhite solution. Ethanol was added to precipitate octa[3-amino-1,2,4-triazole-5-carboxylic acid) propyl] silsesquioxane. The precipitatewas separated by filtration and washed with ethanolresulting in the POSS-ATZAc, according to our previous work [4].The resulting product was obtained after several attempts.Elemental Analysis for Si8O28C48H72N32 (1768.8 g/mol): C 32.56%, N25.32%, H 4.07%; found C 32.49%, N 24.95%, H 4.00%. IR (KBr pellet,cm-1): nu (C-H)=2939, nu (CO) =704, nu (CN) =1600, nu (CN)=1446, nuas (Si-O-Si) =1112. 13C solid-state NMR (100.61 MHz,ppm): 9.64 (CH2-Si), 23.23 (CH2-CH2Si), 48.95 (CH2-N),140.66-149.40 (aromatic ring), 155.22 (carboxylic acid group). 29Sisolid-state NMR (79.48 MHz, (Si-O), ppm): 66.04 (highintensity), 58.04 (low intensity). EDS (Full scale 58029 ctcursor: 0.152 (octs), keV): C, N, O, Si.

In the meantime we’ve collected together some recent articles in this area about 3641-13-2 to whet your appetite. Happy reading!

Reference:
Article; Vieira, Eduardo Guimaraes; Dal-Bo, Alexandre Goncalves; Frizon, Tiago Elias Allievi; Dias Filho, Newton Luiz; Journal of Organometallic Chemistry; vol. 834; (2017); p. 73 – 82;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 107534-96-3, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 107534-96-3, name is 3-((1H-1,2,4-Triazol-1-yl)methyl)-1-(4-chlorophenyl)-4,4-dimethylpentan-3-ol, molecular formula is C16H22ClN3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 8 Synthesis of 2-{2-[2-(4-chloro-phenyl)-ethyl]-2-hydroxy-3,3-dimethyl-butyl}- 2,4-dihydro-[1 ,2,4]triazole-3-thioneTo an ice-cold solution of 1 -(4-chloro-phenyl)-4,4-dimethyl-3-[1 ,2,4]triazol-1 -ylmethyl- pentan-3-ol (236 mg, 0.77 mmol) in 2 mL of THF was added a solution iPrMgCI in THF (2.0 M, 1 .0 mL, 2.0 mmol). The solution was warmed to 40 C and kept at that temperature for 90 min. Then, it was cooled to 0 C and treated and a suspension of sulfur (75 g, 2.34 mmol) in 1 mL of THF was added portionwise and the mixture stirred for another 60 min at 0 C. The solution was then poured onto 4% HCI (20 mL). The a- queous phase was extracted with TBME (2×30 mL). The combined org. phases were successively washed with water and brine. The crude product was obtained after drying over Na2S04 and removal of all volatiles. Purification was accomplished through flash column chromatography on silica (cyclohexane/EtOAc mixtures) to obtain the product as a colorless liquid (151 mg, 0.44 mmol, 58% yield).1H N R (DMSO-de. 500 MHz): delta (ppm) = 8.40 (s, 1 H); 7.29 (d, J = 12.0 Hz, 2 H); 7.18 (d, J = 12.0 Hz, 2 H); 4.51 -4.58 (m, 2 H); 4.00-4.06 (m, 1 H); 2.61 (dt, J = 5.0 Hz, J = 17.0 Hz, 1 H); 2.20-2.30 (m, 1 H); 1 .94-2.04 (m, 1 H); 1 .70 (dt, J = 5.0 Hz, J = 19.0 Hz, 1 H); 0.94 (s, 9 H).

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 3-((1H-1,2,4-Triazol-1-yl)methyl)-1-(4-chlorophenyl)-4,4-dimethylpentan-3-ol, hurry up and to see.

Reference:
Patent; BASF SE; DOCHNAHL, Maximilian; KEIL, Michael; GEBHARDT, Joachim; VOGELBACHER, Uwe Josef; MENGES, Frederik; RACK, Michael; RENNER, Jens; WOLF, Bernd; WO2011/113820; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 252742-72-6, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 252742-72-6, name is 3-(Chloromethyl)-1H-1,2,4-triazol-5(4H)-one, molecular formula is C3H4ClN3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a solution of benzyl[(2S,3S)-2-phenyl-3-piperidinyl]carbamate (100 mg) in a mixture of N,N- dimethylformamide (0.66 ml) and water (0.01 ml) were added potassium carbonate (27 mg) and 5-(chloromethyl)-2,4-dihydro-3H-1,2,4-triazol-3-one (45 mg), and the whole was stirred at room temperature for 1 hour. The mixture was poured into cold water (30 ml) and stirred for 10 minutes. The resulting precipitates was collected by filtration, washed with water, and dried to give the title compound (108 mg) . MASS (ES+): 408 (M+H)+

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 3-(Chloromethyl)-1H-1,2,4-triazol-5(4H)-one.

Reference:
Patent; FUJISAWA PHARMACEUTICAL CO., LTD.; WO2004/111000; (2004); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 1455-77-2, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture containing Co(NO3)2·6H2O (58.2mg, 0.2mmol), Hdatrz (19.8mg, 0.2mmol) and NH2-H2ip (36.2mg, 0.2mmol) was dissolved in mixed H2O?CH3OH (v:v=1:1, 10.0mL) solution, and the initial pH value of the reactant mixture was adjusted to 6 by triethylamine. The resulting mixture was then transferred into a Teflon-lined stainless steel vessel (23.0mL) and heated at 165°C for 96h under autogenous pressure. After the mixture was cooled to room temperature at a rate of 2.9°Ch?1, red block-shaped crystals suitable for X-ray analysis were obtained directly, washed with water and dried in air (Yield: 50percent, based on NH2-H2ip). Anal. Calc. for C36H32Co4N14O17: C, 37.01; H, 2.76; N, 16.78. Found: C, 37.04; H, 2.65; N, 16.72percent. IR (KBr pellet, cm?1): 3409 (br), 3319 (w), 3167 (w), 1625 (s), 1588 (s), 1559 (s), 1481 (s), 1449 (s), 1386 (s), 1322 (w), 1011 (m), 985 (m), 952 (w), 797 (w), 778 (w), 724 (w), 666 (w).

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 1455-77-2.

Reference:
Article; Zhao, Hong; Li, Hong-Xue; Liu, Zhong-Yi; Yang, En-Cui; Zhao, Xiao-Jun; Polyhedron; vol. 101; (2015); p. 29 – 36;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 7343-34-2, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 7343-34-2, name is 3,5-Dimethyl-4H-1,2,4-triazole, molecular formula is C4H7N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a slurry of 4,6-dicUoro-2-(methyltMo)pyrimidine (1-1) (1.00 g, 5.13 mmol, 1.0 eq.) and cesium carbonate (2.70 g, 7.67 mmol, 1.5 eq.) in DMF (40 mL) at 0 °C under nitrogen was added a solution of 3,5-dimethyl-lH-l,2,4-triazole (498 mg, 5.13 mmol, 1.0 eq.) in DMF (20 mL) via a dropping funnel over 1 hour. The reaction was then warmed to room temperature. The reaction was monitored by TLC and was complete after 1 hour. The reaction was quenched by addition of water (100 mL) and extracted with ethyl acetate (3 x 150 mL). The combined organic layers were dried over sodium sulfate, filtered and concentrated to dryness. The resulting residue was purified by silica gel column chromatography (0-50percent ethyl acetate in hexanes) to afford 4-cMoro-6-(3,5-dimemyl-lH-l,2,4-triazol-l-yl)-2-(m (1-2) as a white solid. 1HNMR (300 MHz, CDC13) delta 7.58 (s, 1H), 2.90 (s, 3H), 2.60 (s, 3H), 2.41 (s, 3H). LRMS mlz (M+H) 256 found, 256 required.

I am very proud of our efforts over the past few months and hope to 3,5-Dimethyl-4H-1,2,4-triazole help many people in the next few years.

Reference:
Patent; MERCK SHARP & DOHME CORP.; COX, Christopher, D.; DUDKIN, Vadim, Y.; KIM, June, J.; KUDUK, Scott, D.; MCVEAN, Carol; REGER, Thomas; STEEN, Justin; STEELE, Thomas; WO2013/52526; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 16681-65-5

The title compound was prepared according to No. WO2008 / 135826 International Patent Application Publication. In 1-methyl -1H-1,2,3- triazole (1.0g, 12.0 mmol, prepared according to International Patent Application No. 2008098104) 50 mL 2-neck flask containing, by the addition of THF (45 mL) , colorless solution was cooled to -40 . Then, by adding dropwise the (2.5 M, 4.8 mL, 12.0 mmol in hexane) n-BuLi, to give a dark reddish brown viscous solution. The mixture was stirred for 45 minutes at -30 to -20 in the following, was introduced into a pure DMF (3mL, 38.5 mmol) at -10 . The mixture was allowed to warm to room temperature, after stirring for 60 minutes, poured into water. Extract the aqueous portion with EtOAc (4 × 50 mL), the combined organics washed with brine, dried with MgSO4, filtered, and concentrated. The aqueous portion was extracted with DCM (3 × 50 mL) station, and dried as described above. The combined organics were concentrated to give a light brown oil The UV activity much higher than the starting material. DCM-25% CH3CN, according to TLC or of from 25% EtOAc-DCM, showed the product has a slightly higher Rf than the starting material. (With 100% DCM, 25% CH3CN-DCM increased) by silica gel chromatography on to give the title compound as a colorless oil.

If you are hungry for even more, make sure to check my other article about 16681-65-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Janssen Pharmaceuticals N.V; Leonardo, Christi.A.; Barvei, Kent; Edward, James P.; Gloita, Kevin D.; Kummer, David .A.; Maharoof, Umar; Nishimura, Rachael; Urbanski, Mode; Venkatesan, Hariharan; Wang, Ai Hua; Olin, Ronald L.; Woods, Craig; Fourier, Anne; Shu, Jih; Cumings, Maxwell D.; (86 pag.)KR2016/68948; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 4923-01-7, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine, molecular formula is C3H6N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: Method I. A mixture of Py (4.4 ml) and AcOH (3.0 ml) was stirred and treated by the addition of 5-aminoazole1a-h (0.01 mol) and (2E)-(3-morpholin-4-yl)-acrylonitrile (2) (1.38 g, 0.01 mol). The obtained mixture was refluxed at 150C for 5 h. After refluxing, the mixture was cooled. The precipitate that formed was filtered off, washed with a small amount of EtOH, and dried. Method II. A solution (or suspension) of the appropriate aminoazole 1a-h (0.01 mol) in solvent (15 ml) (EtOH in the case of compound 3a, dioxane in the case of compounds 3b-h) was stirred at 50C and treated by adding 3,3-diethoxypropionitrile (4) (1.5 ml, 0.01 mol), then 36% HCl solution (0.86 ml, 0.01 mol). The reaction mixture was refluxed for 2.5-3 h, the suspension (or solution) was cooled to room temperature, and the target product was isolated by the method indicated for each particular compound.

I am very proud of our efforts over the past few months and hope to 5-Methyl-4H-1,2,4-triazol-3-amine help many people in the next few years.

Reference:
Article; Gazizov, Denis A.; Fedotov, Victor V.; Gorbunov, Evgeny B.; Ulomskiy, Evgeny N.; Yeltsov, Oleg S.; Rusinov, Gennady L.; Rusinov, Vladimir L.; Chemistry of Heterocyclic Compounds; vol. 55; 6; (2019); p. 573 – 577; Khim. Geterotsikl. Soedin.; vol. 55; 6; (2019); p. 573 – 577,5;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics