Day: August 23, 2021

Electric Literature of 27996-86-7, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of 5 mmol appropriate benzaldehyde and 5 mmol thiosemicarbazide in isopropanol was refluxed with a catalytic amount of acetic acid. The solid precipitate was filtered and crystallized from ethanol.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 4-[1,2,4]Triazol-1-yl-benzaldehyde.

Reference:
Article; Ozadali, Keriman; Unsal Tan, Oya; Yogeeswari, Perumal; Dharmarajan, Sriram; Balkan, Ayla; Bioorganic and Medicinal Chemistry Letters; vol. 24; 7; (2014); p. 1695 – 1697;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 3179-31-5, name is 1H-1,2,4-Triazole-3-thiol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 1H-1,2,4-Triazole-3-thiol

Step C: Preparation of 3-(2-(4-(2,6-Difluorobenzyloxy)phenyl)-2-oxoethyl)thio-1H-1,2,4-triazole To a solution of 1H-1,2,4-Triazole-3-thiol (0.250 g, 2.4 mmol) and triethylamine (2.50 g, 2.4 mmol) in dry dichloromethane (20 ml) was added 2-Bromo-1-(4-(2,6-difluorobenzyloxy)phenyl)-1-Ethanone (Step B, 0.851 g, 2.4 mmol) in dry dichloromethane (5 ml) at room temperature. The reaction mixture was stirred for 50 minutes and then concentrated in vacuo. The crude residue was taken in EtOAc and washed with 0.1M HCl, and brine. The organic layer was dried over Na2SO4, filtered, concentrated and purified by flash chromatography on silica gel column (chloroform:methanol, 9:1) to provide the title compound. 1H NMR (270 MHz, CDCl3): 4.5 (s, 2H); 5.1 (s, 2H); 6.8-7.0 (m, 4H), 7.2 (m, 1H); 7.9 (d, 2H); 8.0 (s, 1H).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,4-Triazole-3-thiol, in my other articles.

Reference:
Patent; Wellstat Therapeutics Corporation; Sharma, Shalini; (66 pag.)US9133073; (2015); B2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 1001401-62-2, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, molecular formula is C9H7N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: TBTU (1.1 mmol) was added to a solution of the required carboxylic acid A-1 (1.0 mmol) and DIPEA (2.0 mmol) in DMF (2.0 mL). After stirring at rt for 10 min a solution of the required amine B-3 (1 .0 mmol) in DMF (1.0 mL) was added. The resulting rxn mixture was stirred at rt for up to 3 d before being purified directly by prep. HPLC (method G) to furnish the desired product.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 2-(2H-1,2,3-Triazol-2-yl)benzoic acid.

Reference:
Patent; ACTELION PHARMACEUTICALS LTD; BOLLI, Martin; BOSS, Christoph; BROTSCHI, Christine; GUDE, Markus; HEIDMANN, Bibia; SIFFERLEN, Thierry; WILLIAMS, Jodi T.; WO2014/57435; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 288-36-8, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 2-iodobenzoic acid (3.0 g, 12.09 mmol) in DMF (1.0 mL) was treated with 1,2,3-triazole (1.5 g, 21.7 mmol), CsCO3 (7.08 g, 21.7 mmol), and trans-N,N’- dimethylcyclohexane-l52-diamine (0.31 g, 2.17 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to rt, diluted with EtOAc5 and filtered through Celite. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the faster eluting desired 2-(2H-l52,3-triazol-2-yl)benzoyl acid. Data for 2-triazolyl isomer: 1HNMR (500 MHz, DMSO-d6) delta 13.05 (br s , IH)5 8.12 (s, 2H), 7.81-7.52 (m, 4H) ppm. The undesired l-(2H-l,2,3-triazol-2-yl)benzoic acid eluted second. A portion of the desired acid (0.10 g, 0.53 mmol) was treated with thionyl chloride (0.59 g, 5.3 mmol) in dichloromethane (5.0 mL) at rt. After stirring at RT for 1 h, the mixture was concentrated, azeotroping with benzene to yield acid chloride A-3.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-1,2,3-Triazole.

Reference:
Patent; MERCK & CO., INC.; WO2007/126934; (2007); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 23579-79-5, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 23579-79-5, name is 3,5-Dibromo-1-methyl-1H-1,2,4-triazole, molecular formula is C3H3Br2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

In a 25 mL pressure vial, 3,5-dibromo-1-methyl- 1H-1,2,4-triazole (lnt-41, 424 mg, 1.76 mmol) was dissolved in DMF (5 mL) and potassium carbonate (375 mg, 2.71 mmol), followed by 3- chlorophenol (176 mg, 141 L, 1.36 mmol) were added. The vial was sealed, the reaction mixture was stirred for 15 h at 100 C. After cooling, it was concentrated in vacuo, the residue was purified by column chromatography (silica gel, 70 g, eluting with ethyl acetate / n-heptane, gradient 0: 100 to 30:70 v/v) to yield the title compound as white solid (388 mg, 99%). 1H NMR (CDCl3, 300 MHz): delta 3.78 (s, 3 H), 7.21-7.28 (m, 2 H), 7.32-7.39 (m, 2 H). MS (ES+) m/z 288.0, 290.0, 292.0 [M+H, Br & CI isotopes] .

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 3,5-Dibromo-1-methyl-1H-1,2,4-triazole, hurry up and to see.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; BERCHTOLD, Stefan; GALLEY, Guido; GOERGLER, Annick; JAKOB-ROETNE, Roland; KRUMMENACHER, Daniela; LIMBERG, Anja; NEIDHART, Werner; RATNI, Hasane; REUTLINGER, Michael; RODRIGUEZ SARMIENTO, Rosa Maria; SCHNIDER, Christian; (309 pag.)WO2018/87018; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7170-01-6, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Step 1. Preparation of 3-methyl-1-(4-nitrophenyl)-1H-1,2,4-triazole A mixture of 1-fluoro-4-nitrobenzene (1.54 g, 10.9 mmol), 3-methyl-1H-1,2,4-triazole (1.00 g, 12.0 mmol) and K2CO3 (1.66 g, 12.0 mmol) in DMF (30 ml) was stirred at 75 C. for 12 hours. After being cooled to room temperature, the reaction mixture was concentrated in vacuo. The mixture was dissolved in EtOAc, washed with saturated aq. NaHCO3, dried over Na2SO4, filtered and concentrated in vacuo. The residue was purified by column chromatography on SiO2 (Hex:EA=2:1) to give the desired product (0.500 g, 22%) as a brown solid. 1H NMR (400 MHz, CDCl3) delta 2.52 (3H, s), 7.85-7.88 (2H, m), 8.37-8.40 (2H, m), 8.58 (1H, s). LC-MS m/z=205.0 [M+H]+.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 3-Methyl-1H-1,2,4-triazole.

Reference:
Patent; CHEMIZON, A DIVISION OF OPTOMAGIC CO., LTD.; US2012/53180; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C9H9N3O

A solution of 8.75 g (0.05 mol) of (1-phenyl-1H-1,2,3-triazol-4-yl)methanol (11) in 100 mL of methylene chloride was added in one portion with thorough stirring to a suspension of 16.15 g (0.075 mol) of freshly prepared pyridinium chlorochromate (PCC) in 200 mL of anhydrous methylene chloride. The mixture was stirred for 90 min at room temperature, 200 mL of anhydrous diethyl ether was added, the solution was separated from the black precipitate by decanting, and the precipitate was washed with diethyl ether (2 × 50 mL). The combined extracts were filtered through 20 g of silica gel, the solvent was distilled off under reduced pressure, and the residue was recrys-tallized from carbon tetrachloride. Yield 6.75 g (78%). mp 96-97C. 1 H NMR spectrum (500 MHz, DMSO-d 6 ), delta, ppm: 7.57 t (1H, p-H, J = 7.2 Hz), 7.65 t (2H, m-H, J = 7.2 Hz), 8.03 d (2H, o-H, J = 7.2 Hz), 9.59 s (1H, 5-H), 10.24 s (1H, CHO). Mass spectrum: m/z 174 [M + H] + . Found, %: C 62.45; H 4.14; N 24.21. C 9 H 7 N 3 O. Calculated, %: C 62.42; H 4.07; N 24.27.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 103755-58-4.

Reference:
Article; Pokhodylo; Tupychak; Shyyka, O. Ya.; Obushak; Russian Journal of Organic Chemistry; vol. 55; 9; (2019); p. 1310 – 1321; Zh. Org. Khim.; vol. 55; 9; (2019); p. 1393 – 1405,13;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 16681-65-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A suspension of 6-bromo-3-chloroisoquinoline (60 mg, 0.25 mmol), 1 -methyl- 1 H-1 ,2,3-triazole (41 mg, 0.50 mmol), Pd(OAc)2 (2.22 mg, 9.9 umol) and KOAc (49 mg, 0.50 mmol) in DMA (4 mL) was stirred at 150^ under microwave irradiation for 60 minutes. The reaction mixture was diluted with brine and extracted with EtOAc. The combined organic layers were washed with water and dried with Na2S04 and concentrated in vacuo. The residue was purified using Biotage silica gel column chromatography eluting with 40% EtOAc in cyclohexane to afford the title compound as a white solid (19 mg, 31 %). 1 H NMR (500 MHz, CDCI3) : delta .17 (t, J = 0.9 Hz, 1 H), 8.15 (dt, J = 8.5, 0.9 Hz, 1 H), 7.94 – 7.85 (m, 2H), 7.82 (d, J = 1 .1 Hz, 1 H), 7.67 (dd, J = 8.5, 1 .6 Hz, 1 H), 4.19 (s, 3H). LCMS (ESI) Rt = 2.00 minutes MS m/z 245 [M+H]+

I am very proud of our efforts over the past few months and hope to 1-Methyl-1H-1,2,3-triazole help many people in the next few years.

Reference:
Patent; CANCER RESEARCH TECHNOLOGY LIMITED; HOELDER, Swen; BLAGG, Julian; CHEUNG, Jack; ATRASH, Butrus; SHELDRAKE, Peter; WO2014/37751; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 15294-81-2, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 15294-81-2, name is 4,5-Dibromo-1H-1,2,3-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Intermediate 14e (0554) 4,5-Dibromo-2-methyl-2H-l,2,3-triazole Batch 1 : To a solution of 4,5-dibromo-lH-triazole (Intermediate 14f; 490.00 g, 2.16 mol) in DMF (3.2 L) was added potassium carbonate (358.23 g, 2.59 mol). The mixture was cooled to -10C under a nitrogen atmosphere and iodomethane (147.91 mL, 2.38 mol) was added dropwise. The reaction was then stirred at 25C for 16 hours. Batch 2: To a solution of 4,5-dibromo-lH-triazole (Intermediate 14f; 400 g, 1.76 mol, 1.00 eq) in DMF (2.8 L) was added potassium carbonate (291.9 g, 2.11 mol). The mixture was cooled to – 10C under a nitrogen atmosphere and iodomethane (131.48 mL, 2.11 mol) was added dropwise. The reaction was then stirred at 25C for 16 hours. Batches 1 and 2 were then combined and the reaction was quenched by the addition of water (4.2 L) and the aqueous phase extracted with MTBE (7 L x 3). The organic extract was concentrated under vacuum to approximately 700 mL and isopropanol (2 L) was added dropwise. This mixture was then stirred at 25 C for 2 hours and the resulting precipitate filtered and dried under vacuum to afford undesired 4,5-dibromo-l-methyltriazole (220 g, 23.5%) as a solid which showed the following NMR spectral data: FontWeight=”Bold” FontSize=”10″ H NMR (400MHz, CDCb) delta 4.09 (s, 3H). 13CNMR (400MHz, CDCb) delta 123.03, 113.09, 37.00. The filtrate was concentrated under vacuum to afford an oil, isopropanol (1 L) was added and resulting solution was warmed to 50 C and then water (3 L) was added dropwise. The mixture was cooled to 25C and stirred for 5 hours and the resulting precipitate was collected by filtration, washed with water (300 mL x 2) and, dried under vacuum at 50C for 16 hours to afford 4,5-dibromo-2- methyl-2H-l,2,3-triazole (Intermediate 14e; 570 g, 60.8% yield) as a solid. FontWeight=”Bold” FontSize=”10″ H NMR (400MHz, CDCb) delta 4.18 (s, 3H). 13C NMR (400MHz, CDCb) delta 124.25, 43.07.

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 15294-81-2.

Reference:
Patent; ASTRAZENECA AB; WARD, Richard, Andrew; JONES, Clifford, David; FERON, James, Lyman; (80 pag.)WO2017/80980; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 3179-31-5, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 3179-31-5, name is 1H-1,2,4-Triazole-3-thiol, molecular formula is C2H3N3S, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Step A–Cyclohexylmethyl 1,2,4-Triazol-3-yl Sulfide Cyclohexylmethyl bromide (42 ml; 0.30 mol) was added over 5 min to 1,2,4-triazole-3-thiol (30.3 g; 0.30 mol) and sodium methoxide (17.3 g; 0.32 mol) in dry methanol (250 ml) under dry nitrogen. The mixture was refluxed for 4 h, stirred at room temperature overnight and evaporated. The residue was dissolved in ethyl acetate (400 ml) and water (200 ml). The organic phase is separated, washed with water (100 ml), dried (Na2 SO4), filtered and its volume reduced by evaporation, causing a solid to precipitate. The solid was filtered off and dried, to afford cyclohexylmethyl 1,2,4-triazol-3-yl sulfide (48.0 g; 81%) as white plates, m.p. 74-78 C. (Found, C: 54.98; H: 7.85; N: 21.32; S: 16.13. C9 H15 N3 S requires C: 54.79; H: 7.66; N: 21.30; S: 16.25%). NMR – d(CDCl3; 90 MHz) 0.50-2.10 (11H, m), 3.1 (2H, d, J=6.4 Hz), 8.13 (1H, s) and 13.9 (1H, br s).

I am very proud of our efforts over the past few months and hope to 1H-1,2,4-Triazole-3-thiol help many people in the next few years.

Reference:
Patent; Rohm and Haas Company; US5308830; (1994); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics