Day: September 17, 2021

Electric Literature of 7170-01-6, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A mixture of Zn(NO3)2.6H2O (30.0 mg, 0.1 mmol), 3-amino-1,2,4-triazole (8.4 mg, 0.1 mmol), H2bdc (8.3 mg, 0.05 mmol) and HNO3 (0.08 mL) in a mixed solvents of DMA (1.5 mL), MeOH(1.5 mL) and H2O (3 mL) was placed in a glass vial (23 mL) and heated at 100 C for 3 days. Colorless polyhedral crystals were obtained and washed with MeOH (yield: 75% based on ligand).Anal. Calc. (Found) for C12H11Zn2N8O4.5: C, 30.66 (30.62); H, 2.36(2.26); N, 23.84 (23.82)%. Selected IR data (KBr, cm-1): 3413,3337, 3231, 1633, 1588, 1541, 1390, 1404, 1290, 1227, 1067,1013, 885, 830, 746, 583.

I am very proud of our efforts over the past few months and hope to 3-Methyl-1H-1,2,4-triazole help many people in the next few years.

Reference:
Article; Liu, Jie; Wei, Yuhui; Bao, Fenlin; Li, Guixiang; Liu, Huiyan; Wang, Haiying; Polyhedron; vol. 169; (2019); p. 58 – 65;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C2H4N4

General procedure: 20 mg of gamma-Fe2O3Ph-PMO-NaHSO4 was added to a roundbottomflask containing an aromatic aldehyde (1 mmol), 3-amino-1,2,4-triazole 2 (1.0 mmol), b-diketones (dimedone 3, 1,3-cyclohexadione 4 or ethyl acetoacetate 5) (1.0 mmol) and stirredunder solvent-free conditions at 100 C in certain times. Meanwhile,the progress of the reactionwas indicated by TLC (n-hexane:ethyl acetate; 7:3). With completing the reaction, 3ml ethanol waspoured and the magnetic nanocomposite was separated in thepresence of a magnetic stirring bar; the reaction mixture becameclear. The crude product was recrystallized from ethanol to give thepure product. The pure products were characterized by conventionalspectroscopic methods. Physical and spectral data for theselected compounds are represented below.

If you are hungry for even more, make sure to check my other article about 61-82-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Haghighat, Mahdieh; Shirini, Farhad; Golshekan, Mostafa; Journal of Molecular Structure; vol. 1171; (2018); p. 168 – 178;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 252742-72-6, name is 3-(Chloromethyl)-1H-1,2,4-triazol-5(4H)-one belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 252742-72-6

Example 8: Synthesis of I5-Chloromethyl-2,4-dihydro-[1 ,2,4]triazol-3-one-variant:To a solution of 0.6Og (1.48mmol, 1 equivalent) of III in 3.1 mL of DMF were added 226mg (1.64mmol, 1.1 equivalents) of potassium carbonate at ambient temperature. The mixture was stirred at 209C and a solution of 238mg (1.78mmol, 1.2 equivalents) of 5-Chloromethyl-2,4-dihydro-[1 ,2,4]triazol-3-one in 1.5ml_ of DMF was added dropwise within 15min. The reaction was stirred for 15min at 209C before 1 OmL of water were added dropwise while the product started to crystallize. The resulting suspension was stirred for 10min at 259C before it is cooled to 00C and stirred for 1 h. The crystals was collected by filtration and washed with cold water to give 416mg (68percent) of the title compound after drying under reduced pressure (400C, 10mbar) as a white crystalline product.Example 8a: Synthesis of I lambda^I -Amino^-chloro-eth-^-ylideneJ-hydrazinecarboxylic acid methyl ester-variant: To a solution of 500mg (1.14mmol, 1 equivalent) of III in 4.2mL of acetonitrile were added 546muL (3.29mmol, 2.9 equivalents) of lambda/,lambda/-diisopropylethylamine and 244mg (1.48mmol, 1.29 equivalents) of /V- [1 -Amino-2-chloro-eth-(Z)-ylidene]-hydrazinecarboxylic acid methyl ester. The resulting suspension was stirred at ambient temperature for 3h while a clear solution was formed. The reaction mixture was concentrated under reduced pressure (450C, 100mbar) and the residue was dissolved in 1 OmL of dichloromethane and washed with 1 OmL of a 26.5percent aqueous sodium chloride solution. The organic layer was concentrated under reduced pressure (459C, 100mbar). Then 4.2mL of acetonitrile were added to the residue and the mixture was transferred to a reactor where it was stirred for 55h at 1109C and 1.5bar. Then the reaction mixture was concentrated under reduced pressure (450C, 10 mbar) and the residue was dissolved in 5.6mL of methanol. The reaction mixture was heated to reflux and charcoal was added. The reaction mixture was kept at reflux for 30min before it was filtered over a bed of celite and washed with methanol. The filtrate was concentrated under reduced pressure and then suspended in acetonitrile. The resulting crystalline product I was collected by filtration and washed with cold acetonitrile to give 324mg (53percent) of the title compound as a white crystalline product.Example 9: Synthesis of I without isolation of intermediates:A mixture of 33.5g (77mmol, 1 equivalent) of Xl dissolved in 496ml_ of methanol and 6.69g of Pd/C (10percent) was charged with hydrogen and stirred for 2h at ambient temperature. The catalyst was filtered off and washed three times with 5OmL of methanol. The filtrate was concentrated under reduced pressure (450C, 10mbar) to yield in 34g of III as a colourless oil. This oil was dissolved in 278ml_ of acetonitrile and 28g (218mmol, 2.9 equivalents) of lambda/,lambda/-diisopropylethylamine and 16g (97,8mmol, 1.3 equivalents) of /V-[1 – Amino-2-chloro-eth-(Z)-ylidene]-hydrazinecarboxylic acid methyl ester were added. The mixture was stirred at ambient temperature for three hours and then concentrated under reduced pressure. The residue was dissolved in 30OmL of dichloromethane and washed with 30OmL of a 26.5percent aqueous sodium chloride solution. The organic layer was concentrated under reduced pressure (45°C, 10mbar). Then 13OmL acetonitrile were added and the resulting mixture was transferred to a reactor where it was stirred for 45h at 1100C and 1.5 bar. The reaction mixture was then concentrated under reduced pressure (450C, 10mbar) and the residue was dissolved in 371 mL methanol. The reaction mixture was heated to reflux and charcoal was added. The reaction mixture was kept at reflux for 30min before it was filtered over a bed of celite and washed with methanol. The filtrate was concentrated under reduced pressure and then suspended in 278mL of acetonitrile. The resulting crystals were collected by filtration and washed with acetonitrile to give 377g (69percent) of the title compound as a white crystalline product.NMR: 1H-NMR (DMSOd6, 300MHz) delta (ppm) = 1.36 (d, CH3, 3H, J 6.5Hz), 2.39(dt, CH2, 1 H, J 11.7Hz, J 3.1 Hz), 2.75 (d, CH2, 1 H, J 14.2Hz), 2.84 (d, CH2, 1 H, J 11.7Hz), 3.38 (d, CH2, 1 H, J 13.9Hz), 3.49 (d, CH, 1 H, J 2.54), 3.62 (d, CH2, 1 H, J 10.9Hz), 4.12 (t, CH2, 1 H, J 9.9Hz), 4.33 (d, CH, 1 H, J 2.7Hz), 4.94 (q, CH, 1 H, J 6.5Hz), 7.07 (t, CH, 2H, J 8.8Hz), 7.37 (s, CH, 2H), 7.51 (t, CH, 2H, J 6.1 Hz), 7.83 (S, CH, 1 H), 11.29 (bs, NH, 2H). 13C-NMR (DMSOd6, 75.47MHz) delta (ppm) = 24.75, 50.79, 51.88, 59.07, 68.02, 71.87, 95.77, 114.79, 115.07, 121.39, 121.60, 125.22, 126.87, 128.83, 129.88, 130.31 , 130.74, 131.18, 131.37, 131.47, 133.52, 133.56, 144.24, 146.87, 156.72, 160.45, 163.68.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 252742-72-6.

Reference:
Patent; Sandoz AG; WO2009/106486; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 81606-79-3, name is 2-(1,2,4-Triazol-1-yl)acetonitrile belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 2-(1,2,4-Triazol-1-yl)acetonitrile

To a 50 mL microwave vial with 3-(2-hydroxyethyl)benzaldehyde (620 mg, 4.13 mmol), 2-(lH-l,2,4-triazol-l-yl)acetonitrile (892.60 mg, 8.26 mmol) in toluene (8 mL). DIPEA (2.67 g, 20.64 mmol) was added and stirred at 150 C in microwave. The crude residue was purified by flash column chromatography with DCM/MeOH to afford the title compound as oil (500 mg, 50%).

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 81606-79-3.

Reference:
Patent; PRINCIPIA BIOPHARMA INC.; LOU, Yan; OWENS, Timothy Duncan; BRAMELD, Kenneth Albert; GOLDSTEIN, David Michael; (171 pag.)WO2019/99576; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 27996-86-7

Weigh 5.73 g (36 mmol) of 2-methyl-8-hydroxyquinoline, 5.19 g (30 mmol)4-(1-1,2,4-triazolyl)benzaldehyde and 100 mL of acetic anhydride,Add to a 250 mL round bottom flask,The reaction is completely dissolved at room temperature,Move to the magnetic heating mixer.Warming up to 145 C,Heating back,TLC tracking.After 5 hours of reaction,Stop the reaction,Cool and stand still,A large amount of yellow solid precipitated in the reaction solution.Atmospheric pressure filtration,Wash the solid three times,drying,Recrystallization of acetonitrile,Obtained a yellow-brown floc product of 5.31g,Yield 49.71%

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 27996-86-7.

Reference:
Patent; Fuyang Normal College; Liu Jie; Miao Hui; Qiao Rui; Liu Zhaodi; (18 pag.)CN109206405; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 13423-60-4, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 13423-60-4, name is 1-Phenyl-1H-1,2,4-triazole, molecular formula is C8H7N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

EXAMPLE 19trans-diiodo(N-cyclohexylamine)(1-methyl-3-phenyl-1,2,4-triazol-5-ylidene)platinum(II)Step 1: 1-phenyl-4-methyl-1,2,4-triazolium iodideMethyl iodide (0.13 ml; 2 mmol) is added to a solution of 1-phenyl-1,2,4-triazole-which was obtained according to Antilla, J. C. et al., Journal of Organic Chemistry 2004, 69, 5578-5587-(0.15 g; 1 mmol) in 1 ml of acetonitrile. This mixture is heated at 80 C. for 16 hours, and is then evaporated to dryness. The residue obtained is recrystallized from a minimum amount of ethyl acetate, thus making it possible to obtain 0.12 g of the desired product (41%) whose characteristics are the following:1H NMR spectrum (500.19 MHz, CDCl3, 20 C.) delta [ppm]=4.34 (s, 3H), 7.54 (m, 3H), 7.96 (d, 2H), 9.09 (s, 1H), 11.60 (s, 1H).

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1-Phenyl-1H-1,2,4-triazole.

Reference:
Patent; SANOFI-AVENTIS; CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE; US2011/172199; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Safety of 1,2,4-Triazole-3-carboxylic acid

To a reaction of 1/7-1, 2, 4-triazole-3 -carboxylic acid (226 mg, 2.0 mmol) and 3,5- dichloroaniline (340 mg, 2.1 mmol) in dry DMF (10 mL) was added 1- hydroxybenzotriazole monohydrate (337 mg, 2.2 mmol) and EDC (N-(3- Dimethylaminopropyl)-N’-ethylcarbodiimide) (422 mg, 2.2 mmol) followed by N- methylmorpholine (0.88 mL, 8.0 mmol via syringe). The mixture was stirred at room temperature under nitrogen and the solids were gradually dissolved. The contents were stirred at room temperature for 24.0 h, and then slowly diluted into iced water and extracted with DCM (2 x 50 mL). The DCM phase was washed with ice cold water (2 x 100 mL). The DCM phase was dried over anhydrous Na2S04, filtered and concentrated under reduced pressure and chromatographed on silica gel using EtOAc and Hexanes (60:40) as eluents to get the desired amide 14 (68.6 mg, 13 % yield) as a white solid compound. -NMR (400 MHz, DMSO-de): <514.85 (br s, 1H), 10.88 (br s, 1H), 8.69 (br s, 1H), 8.04-7.98 (m, 2H), 7.35-7.33 (m, 1H) ppm. MH+ = 257.3 m/z. Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 4928-87-4, and we look forward to future research findings. Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; NATIONAL JEWISH HEALTH; WEMPE, Michael Fitzpatrick; VAZQUEZ-TORRES, Andres; DAI, Shaodong; (72 pag.)WO2020/41556; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 31250-99-4, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 31250-99-4, name is 1-Trityl-1H-1,2,4-triazole, molecular formula is C21H17N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

EXAMPLE 6 This Example illustrates the preparation of 1-trityl-3-bromo-1,2,4-triazole. A stirred solution of 1-trityl-1,2,4-triazole (15.55 g, prepared as described in Example 1) and N,N,N’,N’-tetramethylethylenediamine (5.8 g) in dry tetrahydrofuran (500 ml) was cooled to -70 C. under nitrogen and treated dropwise with n-butyllithium (37.5 ml, 1.6M in hexane). The deep-red solution was stirred at -70 C. for twenty minutes, then treated dropwise with a solution of bromine (10.4 g) in dry tetrahydrofuran (10 ml). The now brownish-yellow solution was allowed to warm to -20 C., quenched with 0.1M sodium thiosulphate solution (150 ml), and extracted with dichloromethane (500 ml). The organic layer was washed with water (4*100 ml), dried and evaporated. The residue was chromatographed on silica, using dichloromethane-ether (25:2) as eluant, to give 1-trityl-5-bromo-1,2,4-triazole (7.86 g, m.p. 239-241 C.). NMR (CDCl3):delta7.1-7.3(15H,m), 7.95(1H,s).

I am very proud of our efforts over the past few months and hope to 1-Trityl-1H-1,2,4-triazole help many people in the next few years.

Reference:
Patent; Zeneca Limited; US5393732; (1995); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C2HBr2N3

A Compound WX122-1 (4 g) was dissolved in DMF (100 ml) and the resulting solution was cooled down to0C. NaH (846.3mg) was added in batch. Gas was generated during the process, and after 0.5 hour, MeI (2.6 grams)was added dropwise into the reaction solution which was slowly heated to 25C namely room temperature and stirredfor 12 hours. The reaction solution was poured into a saturated ammonium chloride solution (300ml), and extracted withethyl acetate (50ml33), and the organic phase was washed with a saturated sodium chloride solution (100ml). Theorganic phases were mixed and dried with anhydrous sodium sulfate, filtered, and concentrated under the reducedpressure. This compound was used directly in the next step and did not require purification. ESI m/z: [M+H]+= 242.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 3,5-Dibromo-1H-1,2,4-triazole, in my other articles.

Reference:
Patent; Shandong Danhong Pharmaceutical Co., Ltd.; LUO, Zhi; LI, Xiaolin; YANG, Yaxun; YANG, Lele; LI, Peng; HE, Haiying; LI, Jian; CHEN, Shuhui; (155 pag.)EP3626699; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7343-34-2, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 7343-34-2, name is 3,5-Dimethyl-4H-1,2,4-triazole, molecular formula is C4H7N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: General method for preparation of all presented compounds is described below. Completion ofthe reactions was determined by TLC with bromocresol green solution as a stain.10 mmol of the appropriate azole (1H-1,2,4-triazole, 3-methyl-1H-1,2,4-triazole,3,5-dimethyl-1H-1,2,4-triazole, 1H-tetrazole or 5-methyl-1H-tetrazole) and 10 mmol of 1-adamantanecarboxylic acid were placed in 20 mL screwcap vial and dissolved in 10 mL of 98% concentratedsulfuric acid. The mixture was cooled to 0 C using an ice bath. After cooling, 10 mmol (1010mg) of potassium nitrate were added in small portions over the period of 30 min. Once all of thenitrate has been added, the ice bath was removed, and the mixture was stirred for another 4 h atroom temperature. After 4 h of stirring, reaction mixture was poured on 100 g of crushed ice withshaking and allowed to stand until it reached room temperature. Quenched mixture was filtered andneutralized with saturated NaHCO3 solution. Precipitate was filtered, washed with copious amountsof distilled water and dried in vacuum desiccator. Products are suciently pure for the synthesis ofcoordination compounds, but for the analysis the small portions of each compound were recrystallizedfrom the mixture of water/MeOH (9:1).

We very much hope you enjoy reading the articles and that you will join us to present your own research about 7343-34-2, Happy reading!

Reference:
Article; Pavlov, Dmitry; Sukhikh, Taisiya; Filatov, Evgeny; Potapov, Andrei; Molecules; vol. 24; 15; (2019);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics