Day: September 27, 2021

Application of 342617-08-7, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 342617-08-7, name is 3-(3-Bromophenyl)-4H-1,2,4-triazole, molecular formula is C8H6BrN3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Step 2: [3-(3-Bromophenyl)-1H-1,2,4-triazol-1-yl]methyl 2,2-dimethyipropanoate A slurry of 3-(3-bromophenyl)-1H-1,2,4-triazole (58.5 g; 261 mmol; Step 1 above), anhydrous K2CO3 (43.2 g; 313 mmol), and chloromethylpivalate (45 mL; 313 mmol) in dry MeCN (250 mL) was heated to 80 C. (Note 1) for 1 hour. The mixture was cooled, solid was collected by filtration and the filtrate was concentrated in vacuo. Residue from the filtaret was combined with the filtered solid and the whole was stirred with water approximately 20 minutes. Solid was collected by filtration, washed with water (*3) and recrystallized from MeOH/water, affording the title compound as a colorless solid. LC/MS (method E) tR 0.88 min, m/z 338, 340 (M+H, Br isotopes). The following were prepared from the appropriate benzamides by a procedure similar to Example IV-25.

In the meantime we’ve collected together some recent articles in this area about 342617-08-7 to whet your appetite. Happy reading!

Reference:
Patent; IGNAR, DIANE MICHELE; US2010/113512; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 4928-87-4, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a reaction of 1/7-1, 2, 4-triazole-3 -carboxylic acid (226 mg, 2.0 mmol) and (R)- l-(4-methoxyphenyl)ethan-l -amine (0.28 mL, 2.1 mmol) in dry DMF (10 mL) was added l-hydroxybenzotriazole monohydrate (337 mg, 2.2 mmol) and EDC (N-(3- Dimethylaminopropyl)-N’-ethylcarbodiimide) (422 mg, 2.2 mmol) followed by N- methylmorpholine (0.88 mL, 8.0 mmol via syringe). The mixture was stirred at room temperature under nitrogen and the solids were gradually dissolved. The contents were stirred at room temperature for 24 h, and then slowly diluted into iced water and extracted with DCM (50 mL x 2). The DCM phase was washed with ice cold water (100 mL x 2). The DCM phase was dried over anhydrous Na2S04, filtered and concentrated under reduced pressure and chromatographed on silica gel using MeOH and DCM (5:95) as eluents to get the desired amide 22 (287.1 mg, 58 % yield) as a white solid compound. -NMR (400 MHz, DMSO-de): <514.98-14.44 (m, 1H), 9.16-8.08 (m, 2H), 7.34 (d, J= 8.4 Hz, 2H), 6.88 (d, J= 8.8 Hz, 2H,), 5.18-5.04 (m, 1H), 3.73 (s, 3H), 1.48 (d, J= 7.2 Hz, 3H,) ppm. MH+ = 247.1 m/z. By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1,2,4-Triazole-3-carboxylic acid. Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; NATIONAL JEWISH HEALTH; WEMPE, Michael Fitzpatrick; VAZQUEZ-TORRES, Andres; DAI, Shaodong; (72 pag.)WO2020/41556; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 16681-65-5, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Intermediate 84 (4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(2,6-dimethylpyridin-3-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanol To a flask containing 1 -methyl- lH-l ,2,3-triazole (275 mg, 3.31 mmol, prepared according to PCX Int. Appl., 2008098104) was added THF (35 mL) and the colorless solution was cooled to – 50 C. Then, kappa-butyllithium (2.5 M in hexanes, 1 ,2 mL, 3.0 mmol) was added dropwise which afforded a dark reddish-brown viscous solution. The mixture was stirred between -20 to -10 C for 30 minutes, then a homogeneous THF solution of (4-chloro-2-methoxy-3-(4- (irifluQromethyl)benzy)quinoh (700 nig, 1.44 mmol in 4 mL THF, Intermediate 12: step f) was introduced at 0 C. The reaction mixture became a dark brown color and was allowed to warm gradually to room temperature. The mixture was stirred for 60 minutes at, room, temperature then quenched with aqueous NH4CI solution. The aqueous portion was extracted with EtOAc, 3 x 50 mL. The combined organics were washed with brine, dried over MgS04, filtered and concentrated to provide a brown oil. Chromatography on silica gel (1% MeOH-DCM increasing to 5% MeOH-DCM) provided the title compound as a light brown solid. Racemic (4~chloro-2-methoxy-3-(4~(trifluorometliyl)benzyl)quinohyl)rnethanol was separated into its individual enantiomers using the following conditions: Chiralcel OD, 20 uM (Diacel) using ethanol with 242 nM detection to give the first eluting enantiomer as Intermediate 84b and the second eluting enantiomer as Intermediate 84c.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1-Methyl-1H-1,2,3-triazole is helpful to your research.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 16681-70-2, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a mixture of (E)-3-(4-chloro-2-((5-methyl-2 H-tetrazol-2-yl)methyl)phenyl)- 1 -(4-(pi peridi n-4- yl)piperazin-i-yl)prop-2-en-i-one, dihydrochloride salt (Example 149, step 2)(130 mg, 0.259 mmol), DIPEA (0.316 ml, 1.810 mmol) and 1H-i ,2,3-triazole-4-carboxylic acid (38.0 mg, 0.336 mmol) in DMF (1.5 ml) was added T3P, 50% solution in EtOAc (0.302 ml, 0.517mmol). The resultant mixture was stirred at room temperature over the weekend. Water (0.5 ml) was added and the solvent removed in vacuo. The residue was purified by reverse phase preparative HPLC to afford the title compound as the trifluoroacetate salt;LC-MS: Rt 0.87 mins; MS mlz 525.3 (M+H)+; Method 2minLowpHvo2

In the meantime we’ve collected together some recent articles in this area about 1H-[1,2,3]Triazole-4-carboxylic acid to whet your appetite. Happy reading!

Reference:
Patent; NOVARTIS AG; BEATTIE, David; BAETTIG, Urs; LEGRAND, Darren Mark; LISTER, Andrew Stuart; MCKENNA, Jeffrey; PEARCE, David William; SANDHAM, David Andrew; STEWARD, Oliver Ross; THOMSON, Christopher; WO2015/8230; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 930-33-6, name is 1H-1,2,4-Triazol-3(2H)-one belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 930-33-6

509 g (28.28 mol) of water are added to a solution of the obtained OTA (in 98% sulfuric acid) with stirring and then 213 g (3.38 mol) of concentrated nitric acid (98% by weight commercial nitric acid) are added.After the introduction of nitric acid, the medium was brought to 65 DEG C and stirred at this temperature for 2 hoursSamples are taken to monitor the progress of the nitration (when the temperature of the reaction medium reaches 65 ). The sample is analyzed after external calibration (using commercial ONTA). The results are shown in Fig. Can be obtained at a very high yield.The following procedure was carried out for the recovery of the prepared ONTA.The reaction medium is cooled to 10 C (at the expiry of 2 hours). Subsequently, an amount of 293 g (16.28 mol) of water is added while maintaining the temperature at 10 . The crystallized ONTA is then filtered off and then pull-dried on a Buchner filter.The weight of the recovered wetted ONTA is 403 g.HPLC analysis (of the recovered ONTA) shows that after external calibration (by commercial ONTA), a yield of 96% of the wet product (for the starting ATA) can be achieved.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1H-1,2,4-Triazol-3(2H)-one ,and how the biochemistry of the body works.

Reference:
Patent; Hercules; Yurenko; Herve, Gregoire; Jacob, Gi; Kanyong, Gi; Busay, Jang Marque; (13 pag.)KR2016/28405; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 27996-86-7, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde, molecular formula is C9H7N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: To a glass vessel suitable for sealing with Teflon cap (for microwave vials) were added 1-(chloromethyl)-4,5-dimethoxy-2-nitrobenzene (1 equiv.) [34] and benzaldehyde derivative (3 equiv.) The vessel was capped and then evacuated and backfilled with N2 (thrice-repeated process). Anhydrous DMF (3.5mL/mmol) was introduced and the solution was vigorously stirred for 20minat-20C. TDAE (1.06 equiv.) was added slowly and the mixture was stirred for one hour. Then, the reaction was stirred at room temperature overnight. After LC-MS analysis clearly showed that the chloride had been totally consumed, the reaction was hydrolyzed with water. The mixture was then extracted with ethyl acetate. The combined organic layers were washed with water and brine, dried over Na2SO4, filtered off, and concentrated under reduced pressure to afford the corresponding crude product.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 4-[1,2,4]Triazol-1-yl-benzaldehyde is helpful to your research.

Reference:
Article; Da Costa, Laurene; Scheers, Els; Coluccia, Antonio; Rosetti, Alessia; Roche, Manon; Neyts, Johan; Terme, Thierry; Cirilli, Roberto; Mirabelli, Carmen; Silvestri, Romano; Vanelle, Patrice; European Journal of Medicinal Chemistry; vol. 140; (2017); p. 528 – 541;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

n-BuLi (1.23 M in hexanes, 1.1 mL, 1.35 mmol) was added dropwise to a stirred slurry of 1-methyl-1,2,3-triazole (112 mg, 1.35 mmol) in THF (1 mL) at -40 C. under nitrogen. After stirring for another 30 minutes, the mixture was treated dropwise with a solution of (4-chloro-3-isopropoxy-2-methoxyquinolin-6-yl)(1,2-dimethyl-1H-imidazol-5-yl)methanone (252 mg, 0.67 mmol, Intermediate 27) in THF (5 mL). The reaction was allowed to warm to room temperature over 1 hour. The reaction was then quenched with saturated aqueous NH4Cl. The mixture was poured into a separatory funnel and extracted with DCM (4*60 mL). The organics were combined, washed with brine, dried (Na2SO4), filtered and concentrated to dryness to afford a light yellow oil. The crude material was purified by FCC (1-7.5% MeOH/DCM) followed by reverse-phase HPLC (acetonitrile/water+NH4OH) to provide the title compound as a white solid. 1H NMR (400 MHz, CDCl3) delta ppm 8.08 (d, J=2.2 Hz, 1H), 7.78 (d, J=8.7 Hz, 1H), 7.33 (dd, J=8.6, 2.2 Hz, 1H), 7.18 (s, 1H), 6.18 (s, 1H), 4.74-4.67 (m, 1H), 4.32 (s, 1H), 4.13 (s, 3H), 3.94 (s, 3H), 3.39 (s, 3H), 2.32 (s, 3H), 1.39 (d, J=6.2 Hz, 6H). MS (ESI): mass calcd. for C22H25ClN6O3, 456.2. m/z found, 457.0 [M+H]+. [4-Chloro-2-methoxy-3-(1-methylethoxyl)quinolin-6-yl](1,2-dimethyl-1H-imidazol-5-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanol was purified by chiral SFC (Stationary phase: CHIRALPAK AD-H 5 muM 250*20 mm, Mobile phase: 70% CO2, 30% MeOH/iPrOH 50/50 v/v+(0.3% iPrNH2)) to give 2 enantiomers. The first eluting enantiomer was Example 80b: 1H NMR (400 MHz, CDCl3) delta ppm 8.09 (d, J=2.2 Hz, 1H), 7.77 (d, J=8.7 Hz, 1H), 7.32 (dd, J=8.7, 2.2 Hz, 1H), 7.17 (s, 1H), 6.17 (s, 1H), 4.75-4.66 (m, 1H), 4.36 (s, 1H), 4.13 (s, 3H), 3.94 (s, 3H), 3.39 (s, 3H), 2.32 (s, 3H), 1.39 (d, J=6.2 Hz, 6H). MS (ESI): mass calcd. for C22H25ClN6O3, 456.2. m/z found, 457.2 [M+H]+ and the second eluting enantiomer was Example 80c: 1H NMR (400 MHz, CDCl3) delta ppm 8.06 (d, J=2.2 Hz, 1H), 7.80 (d, J=8.7 Hz, 1H), 7.35-7.32 (m, 1H), 7.21 (s, 1H), 6.24 (s, 1H), 4.74-4.67 (m, 1H), 4.13 (s, 3H), 3.95 (s, 3H), 3.52 (s, 1H), 3.42 (s, 3H), 2.37 (s, 3H), 1.39 (d, J=6.2 Hz, 6H). MS (ESI): mass calcd. for C22H25ClN6O3, 456.2. m/z found, 457.2 [M+H]+.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 16681-65-5.

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 584-13-4, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 584-13-4, name is 4H-1,2,4-Triazol-4-amine, molecular formula is C2H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

4-(4F-l,2,4-Triazol-4-yamino)-2-broraobenzonitriIe (CAB05094)To a solution of 4H-l,2,4-triazol-4-amine (4 204 gt 50,0 mmol) in DMSO (50 mL) was added KOtBu (5.51 g, 50,0 mmol). The mixture was stirred for 0,5 hours at room temperature before 4-fluoro-2-bromobenzonitrile (5.00 g, 25,0 mmol) was added and stirring was continued for 1 hour. The mixture was poured into crushed ice and neutralized with 2M KHSO4 solution. The precipitate was filtered off and recrystallised from MeOH to give CAB05094 (4.82 g, 73%) as a light yellow crystalline solid. Mp 234-236 0C; 1H NMR (400 MHz5 DMSO^6) delta 6,66 (dd, J= 8,6, 2.4 Hz, IH), 6,79 (d, J= 2,4 Hz, IH)5 7,78 (d, J- 8.6 Hz, IH), 8.86 (s, 2H)5 10.45 (s, IH); 13C NMR (100.6 MHz3 DMSO-rf6) delta 105.0, 1 11.5, 115.4, 117.8, 126.0, 136.2, 143,9, 151.8; LRMS (APCI-): m/z 226611,,88 ((110000%%,, [[CC99HH557799BBrrNN55]]””)),, 226633..88 ((9900%%,, [[CC59H581BiN5]”); HRMS (ES+) calcd for C9H779BrN5 [M+H]+: 263,9879, found 263.9870;

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 4H-1,2,4-Triazol-4-amine, hurry up and to see.

Reference:
Patent; STERIX LIMITED; WOO, Lok Wai Lawrence; BUBERT, Christian; WOOD, Paul Michael; PUTEY, Aurelien; PUROHIT, Atul; POTTER, Barry Victor Lloyd; WO2011/23989; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 16681-65-5, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A dry, N2 (g) flushed, 1 dram vial was charged with tetramethylammonium acetate (33.3 mg, 0.250 mmol), bis(triphenylphosphine)palladium dichloride (8.79 mg, 0.0130 mmol) and (S)-methyl 3-bromo-5-(phenyl(tetrahydro-2H-pyran-4-yl)methyl)-5H-pyrido[3,2-b]indole-7-carboxylate (60.0 mg, 0.125 mmol). To this was added 1-methyl-1H-1,2,3-triazole (20.8 mg, 0.250 mmol). The vial was again flushed with nitrogen. To this was added NMP (0.5 mL). The resulting mixture was stirred vigorously under a stream of nitrogen for 10 min. The vial was placed in a pre-heated oil bath at 95 C. and heated at that temperature overnight. The reaction was cooled to room temperature, diluted with EtOAc, washed with water (2×), then brine, dried over MgSO4, filtered, and concentrated. The residue was purified by column chromatography (100% EtOAc?1% MeOH/EtOAc) to give 39.5 mg (66%) as an off-white solid. 1H NMR (500 MHz, CDCl3) delta 8.61 (d, J=1.6 Hz, 1H), 8.50 (s, 1H), 8.47 (d, J=8.2 Hz, 1H), 8.10 (d, J=8.2 Hz, 1H), 7.82 (s, 1H), 7.75 (s, 1H), 7.53-7.45 (m, 2H), 7.42-7.35 (m, 2H), 7.35-7.30 (m, 1H), 5.63 (d, J=10.7 Hz, 1H), 4.11-4.03 (m, 4H), 3.98 (s, 3H), 3.86 (dd, J=11.7, 3.0 Hz, 1H), 3.57 (td, J=11.9, 1.7 Hz, 1H), 3.37 (td, J=11.9, 1.9 Hz, 1H), 3.22-3.09 (m, 1H), 2.11-2.01 (m, 1H), 1.72-1.59 (m, 1H), 1.50-1.38 (m, 1H), 1.07 (d, J=13.1 Hz, 1H). LCMS (M+H)=482.3.

In the meantime we’ve collected together some recent articles in this area about 1-Methyl-1H-1,2,3-triazole to whet your appetite. Happy reading!

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; Norris, Derek J.; Delucca, George V.; Gavai, Ashvinikumar V.; Quesnelle, Claude A.; Gill, Patrice; O’Malley, Daniel; Vaccaro, Wayne; Lee, Francis Y.; DeBenedetto, Mikkel V.; Degnan, Andrew P.; Fang, Haiquan; Hill, Matthew D.; Huang, Hong; Schmitz, William D.; Starrett, JR., John E.; Han, Wen-Ching; Tokarski, John S.; Mandal, Sunil Kumar; (220 pag.)US2016/176864; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 1455-77-2, New Advances in Chemical Research in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world. 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, molecular formula is C2H5N5, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: An equimolar solution of 3,5-diamino-1,2,4-triazole (0.99 g, 0.01 mol) and 2-hydroxynaphthaldehyde (1.72 g, 0.01 mol) in dry methanol (50 mL) was refluxed for 3 h, a precipitated product was formed during refluxing. It was then cooled to room temperature, filtered, washed with methanol (35 mL), then with diethyl ether (2 × 5 mL) and dried under vacuum. Recrystallization in a mixture of methanol:dioxane (1:4) gave TLC pure product (L1) in 83percent yield. The same method was applied for the preparation of all other ligands (L2)?(L5).

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 3,5-Diamino-1,2,4-triazole.

Reference:
Article; Sumrra, Sajjad H.; Chohan, Zahid H.; Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy; vol. 98; (2012); p. 53 – 61;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics