Category: 103755-58-4

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C9H9N3O

General procedure: A 10mL microwave tube was loaded with6a(1.4mmol), paraformaldehyde (4mmol), the appropriate alcohol (4.5mmol) and were irradiated for 20min. The internal temperature reached 150C. The alcohol excess was evaporated under reduced pressure. The residual solid product was purified by column chromatography on silica gel and eluted with an increasing polarity gradient mixture of hexane and ethyl acetate (9/1). For the product 7e was used 5mL of chloroform as solvent.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol, in my other articles.

Reference:
Article; Jordao, Alessandro K.; Novais, Juliana; Leal, Bruno; Escobar, Ana C.; Dos Santos Junior, Helvecio M.; Castro, Helena C.; Ferreira, Vitor F.; European Journal of Medicinal Chemistry; vol. 63; (2013); p. 196 – 201;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 103755-58-4, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol, molecular formula is C9H9N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Step 2 Synthesis of 1-Phenyl-1H-[1,2,3]triazole-4-carbaldehyde MnO2 (1.23 g, 14.14 mmol) was added to a stirred solution of (1-phenyl-1H-[1,2,3]triazol-4-yl)-methanol (245 mg, 1.4 mmol) in DCM (15 mL) and the resulting mixture was stirred at room temperature overnight. The mixture was filtered over a celite bed, and the filtrate was concentrated under reduced pressure to afford 271 mg (99%) of 1-phenyl-1H-[1,2,3]triazole-4-carbaldehyde.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol, hurry up and to see.

Reference:
Patent; Bischoff, Alexander; Subramanya, Hosahalli; Sundaresan, Kumar; Sammeta, Srinivasa Raju; Vaka, Anil Kumar; US2010/160323; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol

General procedure: Into a round-bottom flask were added 5.71mmolof alditolyl-triazole 12 or 21a in 50ml dichloromethane, 0.9mL of pyridine (2 eq.), 5.71mmolof acyl chloride and catalytic amount of DMAP. The mixture was stirred vigorously at room temperature, and the reaction progress was monitored by thin layer chromatography. Next, the mixture was washed with distilled water (3×100mL), saturated sodium bicarbonate solution (5×100mL), dried over anhydrous sodium sulfate, filtered and concentrated under reduced pressure. The product was purified via silica-gel column chromatography using gradient mixture of hexane-ethyl acetate, to afford the pure derivatives 13a-k and 22a-d.

If you are hungry for even more, make sure to check my other article about 103755-58-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Gonzaga, Daniel; Senger, Mario Roberto; Da Silva, Fernando De Carvalho; Ferreira, Vitor Francisco; Silva Jr., Floriano Paes; European Journal of Medicinal Chemistry; vol. 74; (2014); p. 461 – 476;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol

Step b: Preparation of l-phenyl-lH-l,2,3-triazole-4-carbaldehyde (9). To a solution of (1- phenyl-lH-l,2,3-triazol-4-yl)methanol, 7, (1.03 g, 5.87 mmol) in CH2Cl2 (50 mL) was added MnO2 (2.05g, 23.5 mmol). The reaction mixture was stirred for 3 days at room temperature. The reaction mixture was then filtered through Celite and the resulting filtrate was concentrated in vacuo. The crude material was purified by silica gel chromatography (0-5% methanol/dichloromethane) yielding 0.83g (82%) of 9: 1H NMR (400 MHz, CDCl3) delta 10.22 (s, IH), 8.51 (s, IH), 7.53, (d, J= 9.6 Hz, 2H), 7.58-7.49, (m, 3H).

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol ,and how the biochemistry of the body works.

Reference:
Patent; ALTIRIS THERAPEUTICS; WO2009/121063; (2009); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 103755-58-4, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol, molecular formula is C9H9N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: In a two neck flask of 50 mL under nitrogen atmosphere was added KOH (0.64 g, 5 mmol) and tosyl chloride (0.45 g, 2.2 mmol) dissolved in THF (8 mL). The suspension was cooled to 0 C and the required triazole (2 mmol) was added in one portion. The mixture was stirred for 2 h at room temperature. In the end of reaction the aqueous phase was washed with ethyl acetate, the organic phase obtained was dried with MgSO4, filtered and the solvent evaporated under vacuum. The crude product was purified by column chromatography using as eluent a mixture of hexane/ethyl acetate (7/3). (1-(3-Chlorophenyl)-1H-1,2,3-triazol-4-yl)methyl-4-methylbenzenesulfonate (4c): The product was obtained as a white solid in 90% yield:

I am very proud of our efforts over the past few months and hope to (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol help many people in the next few years.

Reference:
Article; Stefani, Helio A.; Canduzini, Hugo A.; Manarin, Flavia; Tetrahedron Letters; vol. 52; 46; (2011); p. 6086 – 6090;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 103755-58-4

General procedure: Propynyl alcohol (2.2 g, 0.04 mol), cuprous iodide (0.4 g, 2.0 mmol) andN,N-diisopropylethylamine (5.2 g, 0.04 mol) were sequentially added into a stirred solution of intermediate9a-9l(0.04 mol) in absolute ethanol (10 v/w) at 25oCfor 24 h. The insoluble matter removed by filtration, and the filtrate is concentrated. Next the filtrate was poured into water, extracted with dichloromethane, and the combined organic layer was washed with water, dried over anhydrous Na2SO4and evaporated to dryness to give compounds10a-10l. Intermediate10a-10l(0.10 mol) without purification was dissolved in glacial acetic acid (10 v/w), chromium trioxide (2 mL, 0.01 mol) was added dropwise and the mixture was stirred 1 h at 100oC.After cooling to r.t., solvent was removed by concentrate under reduced pressure. The residue was added to water under stirring, the precipitates were collected by filtration and washed with water to obtain compounds11a-11l.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol, in my other articles.

Reference:
Article; Xu, Qiaoling; Dai, Baozhu; Li, Zhiwei; Xu, Le; Yang, Di; Gong, Ping; Hou, Yunlei; Liu, Yajing; Bioorganic and Medicinal Chemistry Letters; vol. 29; 19; (2019);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C9H9N3O

A solution of 8.75 g (0.05 mol) of (1-phenyl-1H-1,2,3-triazol-4-yl)methanol (11) in 100 mL of methylene chloride was added in one portion with thorough stirring to a suspension of 16.15 g (0.075 mol) of freshly prepared pyridinium chlorochromate (PCC) in 200 mL of anhydrous methylene chloride. The mixture was stirred for 90 min at room temperature, 200 mL of anhydrous diethyl ether was added, the solution was separated from the black precipitate by decanting, and the precipitate was washed with diethyl ether (2 × 50 mL). The combined extracts were filtered through 20 g of silica gel, the solvent was distilled off under reduced pressure, and the residue was recrys-tallized from carbon tetrachloride. Yield 6.75 g (78%). mp 96-97C. 1 H NMR spectrum (500 MHz, DMSO-d 6 ), delta, ppm: 7.57 t (1H, p-H, J = 7.2 Hz), 7.65 t (2H, m-H, J = 7.2 Hz), 8.03 d (2H, o-H, J = 7.2 Hz), 9.59 s (1H, 5-H), 10.24 s (1H, CHO). Mass spectrum: m/z 174 [M + H] + . Found, %: C 62.45; H 4.14; N 24.21. C 9 H 7 N 3 O. Calculated, %: C 62.42; H 4.07; N 24.27.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 103755-58-4.

Reference:
Article; Pokhodylo; Tupychak; Shyyka, O. Ya.; Obushak; Russian Journal of Organic Chemistry; vol. 55; 9; (2019); p. 1310 – 1321; Zh. Org. Khim.; vol. 55; 9; (2019); p. 1393 – 1405,13;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol

General procedure: To a solution of (1-aryl-1H-1,2,3-triazol-4-yl)methanol (2a-2c) [18] (10 mmol) in dry DMF (5 mL), anhydrous sodium hydride (15 mmol) was added and stirred for 5 min. After adding propargyl bromide (12 mmol), the resulting mixture was stirred at room temperature overnight. Upon completion of the reaction water (20 mL) was added and the whole was extracted with dichloromethane (3 × 30 mL). The combined organic layers were washed with brine and dried over Na2SO4. The organic layer was concentrated in vacuum and the residue was purified by silica gel (60-120 mesh) column chromatography using hexane-EtOAc, (7 : 3, v/v) as eluent to afford products 3a-3c as white solids. 1-Phenyl-4-[(prop-2-yn-1-yloxy)methyl]-1H-1,2,3-triazole (3a). Yield 89 %, white solid, mp 70-73 C. IR spectrum, nu, cm-1: 3221 (?C-H), 2108 (C?C), 1230 (N=N), 1064, 1041 (C-O). 1H NMR spectrum (400 MHz, CDCl3), delta, ppm: 7.99 s (1H, triazole H), 7.62 d (J = 8.9 Hz, 2H, Ar-H), 7.58 d (J = 8.9 Hz, 2H, Ar-H), 7.50 t (J = 7.3 Hz, 1H, Ar-H), 4.65 s (2H, OCH2), 4.20 s (2H, OCH2), 2.50 t (J = 2.4 Hz, 1H, ?C-H). 13C NMR spectrum (101 MHz, CDCl3) deltaC, ppm: 145.78, 140.09, 129.76, 128.63, 122.57, 121.70, 77.08, 74.22, 62.34, 57.33. Found, %: C: 67.57; H 5.17; N 19.68; O 7.47. C12H11N3O. Calculated, %: C 67.59; H 5.20; N 19.71; O 7.50. MS: M 214 [M + H]+.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 103755-58-4

Reference:
Article; Reddy; Reddy; Goud; Rao; Premkumar; Supriya; Russian Journal of General Chemistry; vol. 86; 6; (2016); p. 1424 – 1429; Zh. Obshch. Khim.; vol. 86; 6; (2016); p. 1424 – 1429,6;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 103755-58-4

General procedure: Into a round-bottom flask were added 5.71mmolof alditolyl-triazole 12 or 21a in 50ml dichloromethane, 0.9mL of pyridine (2 eq.), 5.71mmolof acyl chloride and catalytic amount of DMAP. The mixture was stirred vigorously at room temperature, and the reaction progress was monitored by thin layer chromatography. Next, the mixture was washed with distilled water (3×100mL), saturated sodium bicarbonate solution (5×100mL), dried over anhydrous sodium sulfate, filtered and concentrated under reduced pressure. The product was purified via silica-gel column chromatography using gradient mixture of hexane-ethyl acetate, to afford the pure derivatives 13a-k and 22a-d.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol, in my other articles.

Reference:
Article; Gonzaga, Daniel; Senger, Mario Roberto; Da Silva, Fernando De Carvalho; Ferreira, Vitor Francisco; Silva Jr., Floriano Paes; European Journal of Medicinal Chemistry; vol. 74; (2014); p. 461 – 476;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 103755-58-4, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol, molecular formula is C9H9N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a solution of primary alcohol intermediate 43 (1.7 g, 9.71 mmol) in anhydrous DCM (20 mL) was added PBr3 (7.89 g, 29.13 mmol) at room temperature. The reaction mixture was stirred at room temperature overnight. The reaction mixture was quenched by adding H2O (20 mL) slowly, adjusted the pH to 7-8 with NaHCO3. The organic phase was separated and aqueous layer was extracted with DCM (20 mL × 2). The combined organic layers were dried over Na2SO4. The solvent was removed in vacuo and the residue was purified by silica gel column (PE/EtOAc = 4:1) to afford bromine intermediate 44 (1.11 g, 48%) as a white solid. Mp: 126-130 C, TLC Rf = 0.70 (PE/EtOAc = 2:1); 1H NMR (600 MHz, CDCl3, delta ppm): 8.02 (s, 1H), 7.74-7.72 (m, 2H), 7.56-7.53 (m, 2H), 7.48-7.45 (m, 1H), 4.66 (s, 2H); MS (ESI) m/z calcd for C9H8BrN3 [M +2 + H]+: 240.0, found: 240.2.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol.

Reference:
Article; Qin, Yinhui; Teng, Yuetai; Ma, Ruixin; Bi, Fangchao; Liu, Zhiyang; Zhang, Panpan; Ma, Shutao; European Journal of Medicinal Chemistry; vol. 180; (2019); p. 321 – 339;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics