9/22/2021 News Now Is The Time For You To Know The Truth About 1157938-97-0

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone is helpful to your research.

Synthetic Route of 1157938-97-0, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 1157938-97-0, name is 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Under nitrogen, in a 250 ml three-necked flaskZinc powder (11.7 g, 179 mmol, 4.0 eq.) AndTHF (200 ml), TMSCl (2.25 ml) was added,Stirring 30min at room temperature, ice salt bath temperature to 0 ,Ethyl 2-bromopropionate (11.6 mL, 89.6 mmol, 2.0 eq.) Was added dropwise and stirring was continued at 0 C for 30 min,The suspended matter was filtered off under nitrogen flow,The filtrate was transferred to a 500 ml three-neck flask;1- (2,5-difluorophenyl) -2- (1 -hydro-1,2,4-triazol-1-yl) ethanone (10 g, 44.8 mmol, 1.0 eq.Was dissolved in THF (130 ml)The filtrate (200 ml) was added dropwise at room temperature, and the stirring was continued for 72 hours.A solid was produced and filtered to give an off-white solid,3-hydroxy-2-methyl-4- (1 -hydro-1,2,4-triazol-1-yl) butanoic acid ethyl ester;A mixture of crude ethyl 3- (2,5-difluorophenyl) -3-hydroxy-2-methyl-4- (1 -hydro- 1,2,4-triazol-(12.7 g) was suspended in EA (100 mL)Water (50 mL) was added, and when pH = 1 was adjusted with 6N hydrochloric acid,Into a clear two-phase, liquid separation, aqueous phase with EA (50mL)Extraction was carried out twice, the EA phase was combined, washed with saturated brine,Dried over anhydrous sodium sulfate, filtered, concentrated,To give a pale yellow solid, i. EEthyl 3- (2,5-difluorophenyl) -3-hydroxy-2-methyl-4- (1 -hydro-1,2,4-triazol-1-yl) butanoate Purified product(8.8 g, 27 mmol, 60% yield, greater than 99% d.e.).

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone is helpful to your research.

Reference:
Patent; Sichuan Kelun Drug Research Institute Co., Ltd.; Chen, Li; Duan, Jilong; Li, Yang; Li, Donghong; Ge, Jianhua; Wang, Lichun; Hu, Siyu; Zhao, Dong; Wang, Jingyi; Huang, Qingdong; (14 pag.)CN105801500; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7-Sep-2021 News The Best Chemistry compound: 1157938-97-0

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, hurry up and to see.

Reference of 1157938-97-0, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 1157938-97-0, name is 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, molecular formula is C10H7F2N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

The thus obtained LDA-solution (3.66 mL, 0.98 mmol, 1.1 eq) was transferred to a Schlenk vessel and ethylpropionate (100 mg, 0.98 mmol, 1.1 eq.) was added in a drop wise fashion at -78 C. under a nitrogen atmosphere. The resulting mixture was stirred at -78 C. for 30 minutes and then 1-(2,5-difluorophenyl)-2-(lII-1,2,4-triazol-1-yl)ethanone (200 mg, 0.90 mmol, 1.0 eq.) in THF (3.66 mL) was added in a drop wise fashion over 15 minutes. The reaction mixture was stirred for 2 hours at -78 C. and then quenched with acetic acid and warmed to room temperature. The mixture was diluted with aqueous saturated NH4Cl and ethylacetate. The aqueous layer was extracted with ethylacetate (2×) and the combined organic layers were washed with brine, dried (Na2SO4), filtered and concentrated in vacuo to give a yellow oil containing the racemic ester I with a diastereomeric excess of 29% in favour of the desired RR/SS diastereomer. Further purification by column chromatography (n-heptane/EtOAc/MeOH 60/40/5 v/v/v) provided the RR/SS diastereomer (light yellow solid) as well as the RS/SR diastereomer (off-white solid) in a combined overall yield of 179 mg (0.55 mmol, 61%).

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, hurry up and to see.

Reference:
Patent; Basilea Pharmaceutica AG; Van Summeren, Ruben; Vaessen, Harrie; Mink, Daniel; Waser, Mario; (11 pag.)US2019/77771; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Continuously updated synthesis method about 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone.

Synthetic Route of 1157938-97-0, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 1157938-97-0, name is 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, molecular formula is C10H7F2N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

(B) in a three neck reaction flask, propionitrile was added 4mol, 0.1mol catalyst (containing primary amine 0.05molC-9 cinchona alkaloids, 0.05mol formula and copper pigment base formula),Benzoic acid and 0.1mol 0.5LN, N- dimethylacetamide (the DMA), cooled to -10 , stirring the first solution containing 1mol product 0.3LN, N- dimethylacetamide solution, at -10 8 hours of reaction, TLC the reaction was complete, a solution of a concentration of 1mol / 0.3L L hydrochloric acid the reaction was quenched with 0.2L ethyl acetate three times, the combined organic phase was dried over anhydrous sodium sulfate, and concentrated under reduced pressure, the resulting oil was treated with n-heptane / methylene chloride (1/1 by volume) was recrystallized, filtered and dried to give an off-white solid, i.e. a second product, yield 80%, dr is 97:3.;

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone.

Reference:
Patent; Liu, Ke; (7 pag.)CN105777740; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Never Underestimate The Influence Of 1157938-97-0

If you are hungry for even more, make sure to check my other article about 1157938-97-0, the application of this compound in the production field has become more and more popular.

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 1157938-97-0, name is 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C10H7F2N3O

Propionitrile (11 g, 0.200 mmol) was dissolved in 100 mL of anhydrous THF.Replace with nitrogen three times and slowly add at -78CBistrimethylsilyllithium200 mL (1M) of tetrahydrofuran solution, stir for 10 min, then add magnesium bromide (46 g, 0.25 mmol),After stirring for 20 min, 1-(2,5-difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone (22.3 g, 0.100 mmol) was added and slowly raised. To -50 C, then the solution is stirred for 2 hours,Until the disappearance of the raw material, 100 mL saturated ammonium chloride solution and 150 mL ethyl acetate were added.Extract twice, combine the organic phases, and wash three times with saturated saline solution.The organic phase was dried, spin-dried and passed through a column of silica gel (PE:EA=1:2) according to formula (I)23.6 g (yield: 84.9%, d.e. >99%) of de(2S,3R) and (2R,3S) white solids were mixed.The resulting solid was dissolved in 50 ml toluene, 100 ml methyl tert-butyl ether andIn a mixed solvent of 20 mL of methanol, D-10-camphorsulfonic acid (19.7 g, 84.91 mmol) was added.Heat the reaction to 60 C, react for 1h, slowly cool and cool, filter,Obtain a white solid, then add water, stir with sodium bicarbonate, extract with dichloromethane,The organic phase was concentrated to obtain the diastereoisomer of (2S,3R) 8.49 g according to formula (I)(Yield: 35.9%, e.e. >99%, d.e. >99%) LC-MS of the resulting compoundThe result of H-NMR measurement is the same as that described in Example 2.

If you are hungry for even more, make sure to check my other article about 1157938-97-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Liu Meijun; (18 pag.)CN106317044; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Something interesting about 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone

If you are hungry for even more, make sure to check my other article about 1157938-97-0, the application of this compound in the production field has become more and more popular.

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 1157938-97-0, name is 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 1157938-97-0

a) Preparation of a Stock-solution of lithium-diisopropylamide (LDA) in tetrahydrofuran (THF): Diisopropylamine (716 mg, 7,1 mmol, 1.05 eq) was dissolved in anhydrous THF (21.3 mL) and the resulting solution was cooled to -78 C under a nitrogen atmosphere. Subsequently, -BuLi (2,7 M solution in w-heptane, 2.5 mL, 6.7 mmol, 1,0 eq) was added in a drop wise fashion over 15 minutes and the reaction mixture was stirred at -78 C for an additional 15 minutes. Then the solution was warmed to 0 C and stirred for 30 minutes after which the stock solution was cooled to -78 C again, b) Coupling reaction: The thus obtained LDA-solution (3,66 mL, 0.98 mmol, 1.1 eq) was transferred to a Schlenk vessel and ethylpropionate (100 mg, 0.98 mmol, 1.1 eq.) was added in a drop wise fashion at -78 C under a nitrogen atmosphere. The resulting mixture was stirred at -78 C for 30 minutes and then l-(2,5-difluorophenyl)-2-(lH-l,2,4-triazol-l-yl)ethanone (200 mg, 0.90 mmol, 1.0 eq.) in THF (3.66 mL) was added in a drop wise fashion over 15 minutes. The reaction mixture was stirred for 2 hours at -78 C and then quenched with acetic acid and warmed to room temperature. The mixture was diluted with aqueous saturated NH4C1 and ethylacetate. The aqueous layer was extracted with ethylacetate (2x) and the combined organic layers were washed with brine, dried (Na2S04), filtered and concentrated in vacuo to give a yellow oil containing the racemic ester I with a diastereomeric excess of 29% in favour of the desired RR/SS diastereomer. Further purification by column chromatography (-heptane/EtOAc/MeOH 60/40/5 v/v/v) provided the RR/SS diastereomer (light yellow solid) as well as the RS/SR diastereomer (off-white solid) in a combined overall yield of 179 mg (0.55 mmol, 61%).

If you are hungry for even more, make sure to check my other article about 1157938-97-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; BASILEA PHARMACEUTICA AG; VAN SUMMEREN, Ruben; VAESSEN, Harrie; MINK, Daniel; WASER, Mario; WO2014/23623; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Chemical Properties and Facts of 1157938-97-0

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone.

Related Products of 1157938-97-0, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 1157938-97-0, name is 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A 2-neck flask with cooler was charged with zinc (1.1 g, 17 mmol, 3.8 eq.) and heated in vacuo using a hotgun (3 nitogen-vacuum cycles). Subsequently, THF (60 mL) was added and then trimethylsilylchloride (0.15 mL). The resulting suspension was stirred under a nitrogen atmosphere at room temperature for 15 minutes, after which a solution of ketone III (Ri = F, 1.0 g, 4.5 mmol, 1.0 eq.) in THF (30 mL) was added. The reaction mixture was then heated to 66 C, after which the heating source was removed. Subsequently, a solution of ethyl-2-bromopropionate (0.87 mL, 1.2 g, 6.7 mmol, 1.5 eq.) in THF (20 mL) was added dropwise over 10 minutes. The reaction mixture was then stirred at 66 C for 1.5 hours, after which it was cooled to room temperature. The reaction was quenched by addition of a saturated aqueous ammoniumchloride solution (100 mL) and diluted with methyl-teributyl ether (MTBE, 100 mL). The layers were separated and the aquous layer was extracted with MTBE (2x 100 mL). The combined organic layers were washed with brine (100 mL), dried (Na2S04), filtered and concentrated in vacuo to give a yellow oil (1.4 g) containing racemic ester I. ^-NMR- and GC-analysis showed a conversion of ketone III (Ri = F) of 80% and a d.e. of ester I of 60% in favor of the desired RR/SS-diastereomer. The product was not purified further.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone.

Reference:
Patent; BASILEA PHARMACEUTICA AG; VAN SUMMEREN, Ruben; VAESSEN, Harrie; MINK, Daniel; WASER, Mario; WO2014/23623; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Continuously updated synthesis method about C10H7F2N3O

I am very proud of our efforts over the past few months and hope to 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone help many people in the next few years.

Application of 1157938-97-0, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 1157938-97-0, name is 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Zinc (11.7 g, 179 mmol, 4.0 eq.) was suspended in THF (200 mL) and stirred in the presence of TMSCl (2.25 mL) under a nitrogen atmosphere at ambient temperature for 30 minutes in a 250 mL 3-neck flask. Subsequently, the suspension was cooled to 0 C. and ethyl-2-bromopropionate (11.6 mL, 89.6 mmol, 2.0 eq) was added via a syringe pump over 45 minutes. The reaction mixture was stirred for an additional 15 minutes at 0 C. (conversion checked with GC to be 100%), after which the suspension was filtered via cannula over a glass filter under a nitrogen stream to the reaction vessel (500 mL 3-neck flask). Subsequently, a solution of ketone III (R1=F, 10 g, 44.8 mmol, 1.0 eq.) in THF (130 mL) was dosed to the reaction mixture over 1 hour at room temperature. The mixture was stirred for an additional 72 hours at which point a solid had formed. The suspension was filtered and the off-white solid was suspended in EtOAc and dissolved by addition of water and aqueous HCl until a clear biphasic system was obtained (pH 1). The layers were separated and the aqueous layer was extracted with EtOAc (2×). The combined organic layers were washed with water and brine, dried (Na2SO4), filtered and concentrated in vacuo to give racemic RR/SS ester I (R1=F, 8.8 g, 27 mmol, 60%) as a light yellow solid with >99% d.e. as determined by GC. The filtrate was subjected to the same aqueous work-up. GC-analysis showed that the remaining ketone was present in the filtrate as well as racemic ester I with a d.e. of -25% (in favor of the undesired RS/SR diastereomer).

I am very proud of our efforts over the past few months and hope to 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone help many people in the next few years.

Reference:
Patent; Basilea Pharmaceutica AG; Van Summeren, Ruben; Vaessen, Harrie; Mink, Daniel; Waser, Mario; (11 pag.)US2019/77771; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Now Is The Time For You To Know The Truth About 1157938-97-0

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone is helpful to your research.

Reference of 1157938-97-0, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 1157938-97-0, name is 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Under nitrogen, in a 250 ml three-necked flaskZinc powder (11.7 g, 179 mmol, 4.0 eq.) AndTHF (200 ml), TMSCl (2.25 ml) was added,Stirring 30min at room temperature, ice salt bath temperature to 0 ,Ethyl 2-bromopropionate (11.6 mL, 89.6 mmol, 2.0 eq.) Was added dropwise and stirring was continued at 0 C for 30 min,The suspended matter was filtered off under nitrogen flow,The filtrate was transferred to a 500 ml three-neck flask;1- (2,5-difluorophenyl) -2- (1 -hydro-1,2,4-triazol-1-yl) ethanone (10 g, 44.8 mmol, 1.0 eq.Was dissolved in THF (130 ml)The filtrate (200 ml) was added dropwise at room temperature, and the stirring was continued for 72 hours.A solid was produced and filtered to give an off-white solid,3-hydroxy-2-methyl-4- (1 -hydro-1,2,4-triazol-1-yl) butanoic acid ethyl ester;A mixture of crude ethyl 3- (2,5-difluorophenyl) -3-hydroxy-2-methyl-4- (1 -hydro- 1,2,4-triazol-(12.7 g) was suspended in EA (100 mL)Water (50 mL) was added, and when pH = 1 was adjusted with 6N hydrochloric acid,Into a clear two-phase, liquid separation, aqueous phase with EA (50mL)Extraction was carried out twice, the EA phase was combined, washed with saturated brine,Dried over anhydrous sodium sulfate, filtered, concentrated,To give a pale yellow solid, i. EEthyl 3- (2,5-difluorophenyl) -3-hydroxy-2-methyl-4- (1 -hydro-1,2,4-triazol-1-yl) butanoate Purified product(8.8 g, 27 mmol, 60% yield, greater than 99% d.e.).

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone is helpful to your research.

Reference:
Patent; Sichuan Kelun Drug Research Institute Co., Ltd.; Chen, Li; Duan, Jilong; Li, Yang; Li, Donghong; Ge, Jianhua; Wang, Lichun; Hu, Siyu; Zhao, Dong; Wang, Jingyi; Huang, Qingdong; (14 pag.)CN105801500; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

The Best Chemistry compound: 1157938-97-0

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, hurry up and to see.

Synthetic Route of 1157938-97-0, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 1157938-97-0, name is 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, molecular formula is C10H7F2N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

The thus obtained LDA-solution (3.66 mL, 0.98 mmol, 1.1 eq) was transferred to a Schlenk vessel and ethylpropionate (100 mg, 0.98 mmol, 1.1 eq.) was added in a drop wise fashion at -78 C. under a nitrogen atmosphere. The resulting mixture was stirred at -78 C. for 30 minutes and then 1-(2,5-difluorophenyl)-2-(lII-1,2,4-triazol-1-yl)ethanone (200 mg, 0.90 mmol, 1.0 eq.) in THF (3.66 mL) was added in a drop wise fashion over 15 minutes. The reaction mixture was stirred for 2 hours at -78 C. and then quenched with acetic acid and warmed to room temperature. The mixture was diluted with aqueous saturated NH4Cl and ethylacetate. The aqueous layer was extracted with ethylacetate (2×) and the combined organic layers were washed with brine, dried (Na2SO4), filtered and concentrated in vacuo to give a yellow oil containing the racemic ester I with a diastereomeric excess of 29% in favour of the desired RR/SS diastereomer. Further purification by column chromatography (n-heptane/EtOAc/MeOH 60/40/5 v/v/v) provided the RR/SS diastereomer (light yellow solid) as well as the RS/SR diastereomer (off-white solid) in a combined overall yield of 179 mg (0.55 mmol, 61%).

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, hurry up and to see.

Reference:
Patent; Basilea Pharmaceutica AG; Van Summeren, Ruben; Vaessen, Harrie; Mink, Daniel; Waser, Mario; (11 pag.)US2019/77771; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

The important role of C10H7F2N3O

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, its application will become more common.

Synthetic Route of 1157938-97-0,Some common heterocyclic compound, 1157938-97-0, name is 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, molecular formula is C10H7F2N3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Zinc (11.7 g, 179 mmol, 4.0 eq.) was suspended in THF (200 mL) and stirred in the presence of TMSCl (2.25 mL) under a nitrogen atmosphere at ambient temperature for 30 minutes in a 250 mL 3-neck flask. Subsequently, the suspension was cooled to 0 C. and ethyl-2-bromopropionate (11.6 mL, 89.6 mmol, 2.0 eq) was added via a syringe pump over 45 minutes. The reaction mixture was stirred for an additional 15 minutes at 0 C. (conversion checked with GC to be 100%), after which the suspension was filtered via cannula over a glass filter under a nitrogen stream to the reaction vessel (500 mL 3-neck flask). Subsequently, a solution of ketone III (R1=F, 10 g, 44.8 mmol, 1.0 eq.) in THF (130 mL) was dosed to the reaction mixture over 1 hour at room temperature. The mixture was stirred for an additional 72 hours at which point a solid had formed. The suspension was filtered and the off-white solid was suspended in EtOAc and dissolved by addition of water and aqueous HCl until a clear biphasic system was obtained (pH 1). The layers were separated and the aqueous layer was extracted with EtOAc (2×). The combined organic layers were washed with water and brine, dried (Na2SO4), filtered and concentrated in vacuo to give racemic RR/SS ester I (R1=F, 8.8 g, 27 mmol, 60%) as a light yellow solid with >99% d.e. as determined by GC. The filtrate was subjected to the same aqueous work-up. GC-analysis showed that the remaining ketone was present in the filtrate as well as racemic ester I with a d.e. of -25% (in favor of the undesired RS/SR diastereomer).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, its application will become more common.

Reference:
Patent; Basilea Pharmaceutica AG; Van Summeren, Ruben; Vaessen, Harrie; Mink, Daniel; Waser, Mario; (11 pag.)US2019/77771; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics