Research on new synthetic routes about 1186050-58-7

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Fluoro-6-(2H-1,2,3-triazol-2-yl)benzoic acid, other downstream synthetic routes, hurry up and to see.

Reference of 1186050-58-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1186050-58-7, name is 2-Fluoro-6-(2H-1,2,3-triazol-2-yl)benzoic acid belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

To a 3-necked, 3 L, round- bottomed flask equipped with a nitrogen line, temperature probe, heating mantle, reflux condenser, mechanical stirrer, and 1 N aq. NaOH scrubber were added 2-fluoro-6-[1 ,2,3]triazol-2-yl-benzoic acid (Intermediate 12, 120.98 g, 75 wt%, 90.74 g actual, 438 mmol) and toluene (1 L). The mixture was warmed to 50 oC for 1 h with stirring. The mixture was then cooled to 25 oC and thionyl chloride (47.9 mL, 657 mmol) was added. The mixture was warmed back to 50 oC and held for 1 h. During this time, in a separate 5 L jacketed reactor equipped with a mechanical stirrer and temperature probe were added toluene (600 mL), aqueous sodium carbonate (185.7 g, 1 .75 mol in 1 .6 L water), and 2- (4,6-dimethyl-pyrimidin-2-yl)-octahydro-pyrrolo[3,4-c]pyrrole*HOAc(Intermediate 23, 122 g, 438 mmol). This biphasic mixture was cooled to 0 oC. After cooling to 0 oC, the original slurry was poured through a filter and over the stirring biphasic mixture of amine and aqueous sodium carbonate. The mixture was allowed to warm to room temperature. After 2 h, additional 2-(4,6- dimethyl-pyrimidin-2-yl)-octahydro-pyrrolo[3,4-c]pyrrole*HOAc (4 g, 14 mmol) was added and the mixture was stirred for 30 additional minutes. At the end of this period, the layers were separated and 100 mL of methanol were added to the organic layer. The organic layer was dried over MgSO , filtered, and concentrated to a white solid. This solid was taken up in ethanol (1 .4 L) and warmed to 77 oC. The mixture was then cooled to 55 oC and seeded with previously crystallized material. (Note: The seeds were generated from slurrying the initial product in 2-propanol at room temperature [100 mg/mL]). The mixture was cooled to room temperature at a rate of 5 oC per hour. After stirring at room temperature for 14 h, the mixture was filtered and dried to provide the final product as a white crystalline solid (136.84 g, 74%). 1H NMR (400 MHz, CDCIs): 7.88 – 7.78 (m, 1 .78H), 7.75 – 7.69 (s, 1 .22H), 7.51 – 7.43 (m, 1 H), 7.17 – 7.1 1 (m, 1 H), 6.30 – 6.28 (m, 1 H), 4.03 – 3.48 (m, 7H), 3.29 – 3.21 (m, 1 H), 3.15 – 2.92 (m, 2H), 2.30 (s, 6H). MS (ESI) mass calcd forC21 H22FN7O, 407.19; m/z found, 408 [M+H]+. Anal, calcd. for C21 H22FN7O C, 61 .90, H, 5.44, N, 24.06; found C, 61 .83, H, 5.42, N, 24.08

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Fluoro-6-(2H-1,2,3-triazol-2-yl)benzoic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; CHAI, Wenying; LETAVIC, Michael, A.; LY, Kiev, S.; PIPPEL, Daniel, J.; RUDOLPH, Dale, A.; SAPPEY, Kathleen, C.; SAVALL, Brad, M.; SHAH, Chandravadan, R.; SHIREMAN, Brock, T.; SOYODE-JOHNSON, Akinola; STOCKING, Emily, M.; SWANSON, Devin, M.; WO2011/50198; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

The important role of 1186050-58-7

The synthetic route of 2-Fluoro-6-(2H-1,2,3-triazol-2-yl)benzoic acid has been constantly updated, and we look forward to future research findings.

Related Products of 1186050-58-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1186050-58-7, name is 2-Fluoro-6-(2H-1,2,3-triazol-2-yl)benzoic acid belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

Dissolve 2-fluoro-6- (2H- 1,2,3 -triazol-2-yl) benzoic acid (0.69 g, 3.33 mmol) with anhydrous dichloromethaneThionyl chloride (8 mL, 109.0 mmol) and DMF (0.04 mL, 0.5 mmol) were slowly added and the reaction was gradually warmed to reflux for 3 hours. The reaction was stopped, cooled and the solvent was slowly evaporated under reduced pressure. The resulting product was used directly in the next step.

The synthetic route of 2-Fluoro-6-(2H-1,2,3-triazol-2-yl)benzoic acid has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jin Chuanfei; Xu Juan; Zhong Wenhe; Zhang Yingjun; Liu Qi; (35 pag.)CN105949203; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Share a compound : 2-Fluoro-6-(2H-1,2,3-triazol-2-yl)benzoic acid

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

1186050-58-7, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1186050-58-7, name is 2-Fluoro-6-(2H-1,2,3-triazol-2-yl)benzoic acid, This compound has unique chemical properties. The synthetic route is as follows.

To a solution of (S)-2,7-dimethyl-3-(3,4,5-trifluorophenyl)-4,5,6,7-tetrahydro-2H-pyrazolo[3,4-c]pyridine (15 mg, 53.3 mumol) (Intermediate 40) in CH2Cl2 (0.48 mL) was added 2-fluoro-6-(2H-1,2,3-triazol-2-yl)benzoic acid (prepared according to methods described in Pat. Pub. No. WO2012145581, Oct. 26, 2012) (12.2 mg, 58.7 mumol), HATU (26.4 mg, 69.3 mumol), and N,N-diisopropylethylamine (27.6 muL, 0.16 mmol). After stirring at room temperature for 30 min, the mixture was concentrated in vacuo and purified by preparative HPLC (XBridge C18 column (5 mum, 100*4.6 mm), mobile phase of 5-95% ACN in 20 mM aqueous NH4OH) to afford the title compound as a white powder (21 mg, 84% yield). MS (ESI): mass calcd. for C23H18F4N6O, 470.1; m/z found, 471.2 [M+H]+. 1H NMR (600 MHz, DMSO-d6) delta 8.19-8.05 (m, 1.62H), 7.93-7.90 (m, 0.40H), 7.87-7.83 (m, 0.91H), 7.74-7.66 (m, 1H), 7.59-7.38 (m, 3H), 5.59-5.49 (m, 0.74H), 4.73-4.62 (m, 0.28H), 4.57-4.51 (m, 0.17H), 3.81 (s, 2.26H), 3.76 (s, 0.22H), 3.70 (s, 0.52H), 3.64-3.52 (m, 0.72H), 3.38-3.17 (m, 0.73H), 3.07-3.00 (m, 0.22H), 2.84-2.76 (m, 0.15H), 2.71-2.60 (m, 0.63H), 2.45-2.22 (m, 1.47H), 1.47 (d, J=6.7 Hz, 2.28H), 1.35 (d, J=6.8 Hz, 0.6H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Janssen Pharmaceutica NV; Ameriks, Michael K.; Chen, Gang; Huang, Chaofeng; Laforteza, Brian Ngo; Ravula, Suchitra; Southgate, Emma Helen; Zhang, Wei; US2020/102303; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Sources of common compounds: 1186050-58-7

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1186050-58-7.

These common heterocyclic compound, 1186050-58-7, name is 2-Fluoro-6-(2H-1,2,3-triazol-2-yl)benzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 1186050-58-7

A mixture of [4-(Hexahydro-pyrrolo[3,4-c]pyrrol-2-yl)-6-methoxy-pyrimidin-2-yl]- dimethyl-amine (60.0 mg, 0.23 mmol), 2-fluoro-6-[1 ,2,3]triazol-2-yl-benzoic acid (52.0 mg, 0.25 mmol), HATU (130.0 mg, 0.34 mmol) and DIPEA (0.12 mL, 0.68 mmol) was stirred into DMF (4.0 mL) at room temperature for 30 minutes. The reaction mixture was diluted with ethyl acetate (60.0 mL) and washed with water (2 X 100 mL). The organic phase was dried (Na2SO4), filtered and concentrated to dryness to yield crude title compound (354.0 mg, 343 %). The crude product was purified using Agilent HPLC (Basic system) to yield pure title compound (84.0 mg, 81 .5 %). MS (ESI) mass calcd. for C22H25FN8O2,452.49; m/z found 453.3 [M+H]+. 1 H NMR (CDCI3): 7.88-7.79 (m, 2H), 7.72 (d, J = 6.7, 1 H), 7.54-7.41 (m, 1 H), 7.19-7.08 (m, 1 H), 5.02-4.92 (m, 1 H), 3.96-3.86 (m, 1 H), 3.87-3.83 (m, 3H), 3.81 -3.50 (m, 5H), 3.43-3.19 (m, 2H), 3.15-3.09 (m, 6H)), 3.09-2.91 (m, 2H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1186050-58-7.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; CHAI, Wenying; LETAVIC, Michael, A.; LY, Kiev, S.; PIPPEL, Daniel, J.; RUDOLPH, Dale, A.; SAPPEY, Kathleen, C.; SAVALL, Brad, M.; SHAH, Chandravadan, R.; SHIREMAN, Brock, T.; SOYODE-JOHNSON, Akinola; STOCKING, Emily, M.; SWANSON, Devin, M.; WO2011/50198; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics