Continuously updated synthesis method about 135242-93-2

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol ,and how the biochemistry of the body works.

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 135242-93-2, name is (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C4H7N3O

c 3-Chloromethyl-1-methyl-1H-1,2,4-triazole (1-Methyl-1H-1,2,4-triazol-3-yl)methanol (500 mg, 4.4 mmol) (prepared using the conditions described in EP-A-421210) was added portionwise to thionyl chloride (5 ml) at 0 C. Upon complete addition the mixture was allowed to warm to room temperature, then heated at reflux for 45 minutes (gas evolution observed). Upon cooling the thionyl chloride was removed in vacuo. The residue was partitioned between dichloromethane and aqueous sodium hydrogen carbonate. The aqueous phase was further extracted with dichloromethane (x2). The combined extracts were dried (Na2SO4), filtered and evaporated to give the title chloride (570 mg), as an oil. This material was used without further purification. Data for the title compound: 1H NMR (250 MHz, CDCl3) delta 3.92 (3H, s), 4.63 (2H, s), 8.10 (1H, s). MS (ES+) m/e 133 [MH]+, 131 [MH]+.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol ,and how the biochemistry of the body works.

Reference:
Patent; Merck Sharp & Dohme Ltd.; US6355798; (2002); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Extracurricular laboratory: Synthetic route of 135242-93-2

If you are hungry for even more, make sure to check my other article about 135242-93-2, the application of this compound in the production field has become more and more popular.

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 135242-93-2, name is (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C4H7N3O

To a solution of (1-methyl-1 H-1 ,2,4-triazol-3-yl)methanol (489 mg, compound D24) in dry DCM (0.6 ml) are added tetrabromomethane (1 .87 g) and triphenylphosphane (1.48 g). The mixture is stirred for 1 h at RT to give 3-(bromomethyl)-1-methyl-1 H-1 ,2,4-triazole. The reaction mixture is directly used in step 2.

If you are hungry for even more, make sure to check my other article about 135242-93-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; NYCOMED GMBH; FLOCKERZI, Dieter; STENGEL, Thomas; MANN, Alexander; OHMER, Harald; KAUTZ, Ulrich; WEINBRENNER, Steffen; FISCHER, Stefan; ZITT, Christof; HATZELMANN, Armin; DUNKERN, Torsten; HESSLINGER, Christian; MAIER, Thomas; TENOR, Hermann; BRAUN, Clemens; KUeLZER, Raimund; MARX, Degenhard; WO2011/73231; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Simple exploration of 135242-93-2

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 135242-93-2.

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 135242-93-2, name is (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol

To a mixture of 176 (1-methyl-1H-1,2,4-triazol-3-yl)methanol (400 mg, 3.54 mmol) and 177 iodobenzene diacetate (1.25 g, 3.89 mmol) in 68 dichloromethane (10 mL) was added 178 TEMPO ((2,2,6,6-tetramethylpiperidin-1-yl)oxyl) (56 mg, 354 mumol). The mixture was stirred at 15-20 C. for 2 h. The mixture was concentrated in vacuo. The residue was purified by silica gel chromatography (petroleum ether:ethyl acetate=1:2) to give 179 1-methyl-1H-1,2,4-triazole-3-carbaldehyde (300 mg, 2.70 mmol, 76% yield). 1H NMR (chloroform-d 400 MHz) delta 10.01 (s, 1H), 8.19 (s, 1H), 4.06 (s, 3H

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 135242-93-2.

Reference:
Patent; H. Lundbeck A/S; Juhl, Karsten; Jessing, Mikkel; Langgard, Morten; Vital, Paulo Jorge Vieira; Kehler, Jan; Rasmussen, Lars Kyhn; Clementson, Carl Martin Sebastian; Marigo, Mauro; (154 pag.)US2019/194189; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

The Shocking Revelation of 135242-93-2

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 135242-93-2.

Research speed reading in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 135242-93-2, name is (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C4H7N3O

f 6-(1-Methyl-1H-1,2,4-triazol-3-ylmethoxy)-7-phenyl-3-(pyrazin-2-yl)-1,2,4-triazolo[4,3-b]pyridazine To a solution of (1-methyl-1H-1,2,4-triazol-3-yl)methanol (prepared using the conditions described in EP-A-421210; 0.044 g, 0.39 mmol) in dimethyl formamide (10 ml) was added sodium hydride (0.016 g of a 60% dispersion in oil, 0.390 mmol) and the reaction mixture was stirred at room temperature under nitrogen for 0.5 h. After this time, the product from Example 1 step e) (0.1 g, 0.325 mmol) was added and the reaction mixture stirred for 2.5 h. The solvent was removed under high vacuum. Water (5 ml) was added to the residue and the solid produced was collected by filtration. The solid was recrystallized from ethyl acetate/ethanol to give the required product (0.049 g, m.p. 256.9-257.8 C.). 1H NMR (360 MHz, CDCl3) delta 3.94 (3H, s), 5.62 (2H, s), 7.47 (3H, m), 7.67 (2H, m), 8.04 (1H, s), 8.10 (1H, s), 870 (1H, s), 8.84 (1H, s), 9.80 (1H, s) MS (ES+) m/e 386 [MH+].

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 135242-93-2.

Reference:
Patent; Merck Sharp & Dohme Ltd.; US6297235; (2001); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Interesting scientific research on (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 135242-93-2.

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 135242-93-2, name is (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol

To a cooled (ice bath) solution of (1-methyl- 1H-1 ,2,4-triazol-3-yl)methanol (400 mg, 3.54 mmol) and DIEA (0.98 mL, 7.1 mmol) in CH2CI2 (35 mL) wasadded MsCI (0.41 mL, 5.3 mmol). The reaction was stirred at roomtemperature for 3 h then quenched with NaHCO3 (sat) (20 mL). The layers wereseparated and the aqueous layer was back-extracted with CH2CI2 (15 mL x 2).The combined organic layers were washed with brine (20 mL x 2) then dried over anhydrous Na2504, filtered and concentrated to give(1-methyl- 1H-1 ,2,4-triazol-3-yl)methyl methanesulfonate (650 mg, 96%) asyellow oil. 1H NMR (400 MHz, ODd3) O [ppm] 8.05 (s, 1H), 5.29(s, 2H), 3.93(s,3H), 3.09 (5, 3H).

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 135242-93-2.

Reference:
Patent; PFIZER INC.; ITEOS THERAPEUTICS; NINKOVIC, Sacha; CROSIGNANI, Stefano; SCALES, Stephanie Anne; MCALPINE, Indrawan James; COLLINS, Michael Raymond; MADERNA, Andreas; WYTHES, Martin; (295 pag.)WO2016/147144; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New downstream synthetic route of Application of 135242-93-2

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol, hurry up and to see.

Application of 135242-93-2, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 135242-93-2, name is (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol, molecular formula is C4H7N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

6-Cyclobutyl-3-(2-fluorophenyl)-4H-1,2,3-triazolo[1,5-alpha]pyrimidin-5-one (50 g, 0.18 mmol), triphenylphosphine (120 mg, 0.44 mmol) and (1-methyl-1H-1,2,4-triazol-3-yl)methanol (50 g, 0.44 mmol) were suspended in dry tetrahydrofuran (1.5 ml).. diethyl azodicarboxylate (70 mul, 0.44 mmol) was added and a solution resulted immediately.. The reaction was stirred at room temperature for 48 hours during which time a precipitate formed in the reaction mixture.. The crude reaction mixture was evaporated and recrystallized from EtOAc. The pale pink crystalline solid thus produced was collected by filtration and washed with diethyl ether to afford 6-cyclobutyl-3-(2-fluorophenyl)-5-(1-methyl-1H-1,2,4-triazol-3-ylmethoxy)-1,2,3-triazolo[1,5-alpha]pyrimidine (40 mg, 60%) as pale needles, m.p. 202-205 C.; deltaH (400 MHz, CDCl3) 1.84-1.92 (1H, m, CH(CH2)3), 2.06-2.16 (3H, m, CH(CH2)3), 3.67 (1H, quintet, J=9 Hz, CH(CH2)3), 3.94 (3H, s, NCH3), 7.19-7.29 (2H, m, ArH), 7.32-7.36 (1H, m, ArH), 8.04 (1H, s, triazole CH), 8.12 (1H, td, J=7.5 and 1.8 Hz, ArH), 8.55 (1H, d, J=1.5 Hz, pyrimidine CH); m/z (ES+) 380 (M+H+).

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol, hurry up and to see.

Reference:
Patent; Merck Sharp & Dohme Ltd.; US6337331; (2002); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A new synthetic route of (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol.

Related Products of 135242-93-2, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 135242-93-2, name is (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol, molecular formula is C4H7N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a mixture of (1-methyl-1H-1,2,4-triazol-3-yl)methanol (400 mg, 3.54 mmol) and iodobenzene diacetate (1.25 g, 3.89 mmol) in dichloromethane (10 mL) was added TEMPO ((2,2,6,6-tetramethylpiperidin-1-yl)oxyl) (56 mg, 354 mumol. The mixture was stirred at 15-20 C. for 2h. The mixture was concentrated in vacuo. The residue was purified by silica gel chromatography (petroleum ether:ethyl acetate=1:2) to give 1-methyl-1H-1,2,4-triazole-3-carbaldehyde.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol.

Reference:
Patent; H. Lundbeck A/S; Kehler, Jan; Rasmussen, Lars Kyhn; Langgard, Morten; Jessing, Mikkel; Vital, Paulo Jorge Vieira; Juhl, Karsten; Marigo, Mauro; (63 pag.)US2018/179200; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Discover the magic of the 135242-93-2

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol is helpful to your research.

Electric Literature of 135242-93-2, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 135242-93-2, name is (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol, molecular formula is C4H7N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a solution of 0.5 g (4.42 mmol, 1.0 eq.) of (l-methyl-li/-l,2,4-triazol-3-yl)methanol (Xlla) in 20 mL of acetonitrile was added 1.07 g (6.63 mmol, 1.5 eq.) of I,G -carbonyl and the mixture was stirred at room temperature for 2 h. Volatiles were removed in vacuo and the residue was resuspend in 20 mL of water. The mixture was extracted with 3 x 50 mL of 5% methanol in methylene chloride. The combined organic extracts were washed with 50 mL of sat. sodium carbonate solution, followed by 50 mL of brine, dried (T^SCL), filtered and the solvent was removed in vacuo to provide 0.77 g of ( 1 -methyl- 1 H- 1 2.4-triazol-3-yl)methyl 1 //-imidazole- 1 -carboxy late (XIHa).

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol is helpful to your research.

Reference:
Patent; ARBUTUS BIOPHARMA CORPORATION; KULTGEN, Steven; COLE, Andrew G.; (217 pag.)WO2020/23710; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Interesting scientific research on 135242-93-2

In the meantime we’ve collected together some recent articles in this area about (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol to whet your appetite. Happy reading!

Synthetic Route of 135242-93-2, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 135242-93-2, name is (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol, molecular formula is C4H7N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a mixture of (l-methyl-l/-/-l,2,4-triazol-3-yl)methanol (400 mg, 3.54 mmol) and iodobenzene diacetate (1.25 g, 3.89 mmol) in dichloromethane (10 mL) was added TEMPO ((2, 2,6,6- tetramethylpiperidin-l-yl)oxyl) (56 mg, 354 pmol). The mixture was stirred at 15-20C for 2h. The mixture was concentrated in vacuo. The residue was purified by silica gel chromatography (petroleum ethenethyl acetate = 1:2) to give l-methyl-l/-/-l,2,4-triazole-3-carbaldehyde (300 mg, 2.70 mmol, 76% yield). XH NMR (chloroform-d 400 MHz) d 10.01 (s, 1H), 8.19 (s, 1H), 4.06 (s, 3H).

In the meantime we’ve collected together some recent articles in this area about (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol to whet your appetite. Happy reading!

Reference:
Patent; H. LUNDBECK A/S; KEHLER, Jan; JUHL, Karsten; MARIGO, Mauro; VITAL, Paulo, Jorge, Vieira; JESSING, Mikkel; LANGGARD, Morten; RASMUSSEN, Lars, Kyhn; CLEMENTSON, Carl, Martin, Sebastian; (278 pag.)WO2019/115567; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Never Underestimate The Influence Of 135242-93-2

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol.

Application of 135242-93-2, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 135242-93-2, name is (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of carbonyldiimidazole (CDI) (97 g, 0.6 mol), (l-methyl-l,2,4-triazol-3- yl)methanol (67.7 g, 0.6 mol), and 2-MeTHF (1150 mL) was stirred at room temperature (20 C) for 2h. The reaction mixture was added to a stirred mixture of (S)- 1 -amino-N-(3-chloro- 4-fluorophenyl)-7-fluoro-2,3-dihydro-lH-indene-4-carboxamide hydrochloride (143.3 g, 0.4 mol), 2-MeTHF (860 mL), and N,N-diisopropylethylamine (129 g, 1 mol). The mixture was heated to 60 C and the contents maintained at 60 C for 6h. The contents were cooled to 20 C, water (285 mL) was added, and the mixture was stirred for 15 min. The layers were separated and the organic layer was washed with water two times (285 mL each time). The organic layer was filtered through a pad of Celite, and rinsed with 145 mL 2-MeTHF (1 volume). The solution was concentrated to about 700 mL under vacuum. 2-propanol (710 mL) was added and the mixture concentrated to about 700 mL. Additional 2-propanol (710 mL) was added and the mixture concentrated to approximately 1000 mL. The slurry was heated at 45 C for 2h and cooled to 20 C, over lh. The slurry was stirred at 20 C for 2h, and the product filtered. The product was washed with 2-propanol two times (286 mL each wash), and the wet product was dried under vacuum to give (1 -methyl- 1H- 1,2, 4-triazol-3- yl)methyl (S)-(4-((3-chloro-4-fluorophenyl)carbamoyl)-7-fluoro-2,3-dihydro-lH-inden-l- yl)carbamate (I) as solid (144.5 g, 78.4% yield).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol.

Reference:
Patent; ARBUTUS BIOPHARMA CORPORATION; COLE, Andrew G.; KULTGEN, Steven; PAMULAPATI, Ganapati Reddy; (70 pag.)WO2020/46941; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics