9/23/2021 News Research on new synthetic routes about 16681-65-5

We very much hope you enjoy reading the articles and that you will join us to present your own research about 16681-65-5, Happy reading!

Synthetic Route of 16681-65-5, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of n-BuLi (0.3 mL, 0.75 mmol, 2.5 M solution in hexane) was added slowly to a solution of 1-methyl-1H-1,2,3-triazole (65.6 mg, 0.789 mmol) in THF (4 mL) at -45 C. After addition, stirring was continued for an additional 30 minutes at 40 C. and (3-((4-(1H-pyrazol-1-yl)piperidin-1-yl)methyl)-4-chloro-2-methoxyquinolin-6-yl)(1,2-dimethyl-1H-imidazol-5-yl)methanone (189 mg, 0.395 mmol, Intermediate 42) dissolved in THF (2 mL) was slowly added. An additional 1 mL of THF was used to complete the quantitative addition. The mixture was stirred at -40 C. for 5 minutes then warmed to room temperature and stirred for 1 hour. The solution was quenched with saturated aqueous NH4Cl solution. H2O was added and layers were separated. The aqueous layer was extracted with EtOAc and the combined organic extracts washed with brine, dried over MgSO4, filtered, evaporated in vacuo. The crude product was purified using flash column chromatography (0 to 7% MeOH-DCM) to provide the title compound. MS m/e 562.6 (M+H)+.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 16681-65-5, Happy reading!

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

S News The Shocking Revelation of 16681-65-5

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1-Methyl-1H-1,2,3-triazole.

Related Products of 16681-65-5, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

l-Methyl-5-tributylstannanyl-lH-[l,2,3]triazole; To a solution of 1 -methyl- lH-[l,2,3]triazole (1.33 g, 16 mmol) in THF (20 mL) at -78 0C, was added dropwise n-BuLi (11 mL,1.6M, 18 mmol). The mixture was stirred at -78 0C for 2 h before addition of Bu3SnCl (4.75 mL, 17.6 mmol). The mixture was stirred at this temperature for 1 h and at r.t. for 1 h. The mixture was concentrated in vacuo and hexanes was added. The insoluble material was removed by filtration and the filtrate was concentrated in vacuo to afford l-methyl-5-tributylstannanyl-lH- [l,2,33triazole (6.12 g, 82% yield) as a yellow syrup.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1-Methyl-1H-1,2,3-triazole.

Reference:
Patent; NOVARTIS AG; NOVARTIS PHARMA GMBH; WO2006/108591; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

September 22, 2021 News Chemical Properties and Facts of 16681-65-5

This is the end of this tutorial post, and I hope it has helped your research about 16681-65-5!

Reference of 16681-65-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

7.1 : 1 -Methyl-1 H-[1 ,2,3]triazole (1 .50 g; 17.150 mmol) was dissolved in dry THF (30.0 mL) under argon and cooled to -65 C. Butyllithium (2.5 M in hexane; 6.86 mL; 17.150 mmol) was added dropwise over a period of 10 min. The temperature was hold between -65 C and -60 C. A colorless suspension was formed, which was stirred at – 65 C for 1 h. 1 -Methyl-1 H- pyrazole-4-carbaldehyde (1 .89 g; 17.150 mmol), dissolved in dry THF (10.0 mL), was added dropwise at -65 C and the mixture stirred at – 65 C for 15 min. The reaction mixture was slowly warmed to 0 C within 1 .5 h and then quenched with methanol (10 ml_) and evaporated to dryness. The crude residue was dissolved in dry THF (50.0 ml_) and water (15.0 ml_). (0380) Manganese(IV) oxide (2.98 g; 34.299 mmol) was added, and the mixture was stirred at 80 C overnight. Manganese(IV) oxide (2.98 g; 34.299 mmol) was added and the mixture was stirred for further 24 h at 80 C. The mixture was filtered over kieselguhr. The residue was washed with dichloro- methane/methanol(30%). The combined filtrates were evaporated to an aqueous residue. A precipitate was formed, which was filtered by suction and washed with little water, acetonitrile and MTBE and dried under vacuum at 50 C for 1 h. The filtrate was diluted with water and extracted with ethyl acetate. The combined organic layers were washed with sodium sulfate, filtered by suction and evaporated to dryness. The solid residue was triturated with little acetonitrile, filtered by suction and washed with little acetonitrile and MTBE, and dried under vacuum at 50 C for 1 h. Yield: 2.38 g colorless solid; (0381) LC/MS, Rt: 1 .29 min; (M+H) 192.2

This is the end of this tutorial post, and I hope it has helped your research about 16681-65-5!

Reference:
Patent; MERCK PATENT GMBH; BUCHSTALLER, Hans-Peter; (101 pag.)WO2018/87021; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

18-Sep-2021 News Some scientific research about 16681-65-5

I am very proud of our efforts over the past few months and hope to 1-Methyl-1H-1,2,3-triazole help many people in the next few years.

Related Products of 16681-65-5, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Intermediate 52: step b 1-(4-(1-methyl-1H-1,2,3-triazole-5-carbonyl)piperidin-1-yl)ethanone A solution of i-memyl-lH-l ,2,3-triazole (0.28 g, 3.37 mmol) in dry THF (3 mL) was cooled in a -78 C bath and -butyllithium (2.5 M in hexanes, 1 .26 mL, 3.15 mmol) was added dropwise over a 20 minute period. The suspension was stirred in the cold bath for 30 minutes and then 1 – acetyl-A’-methoxy-N-methy}piperidine-4-carboxamide (0.74 g, 3.45 mmol, Intermediate 52: step a) dissolved in THF (3 mL) was added dropwise. The resulting suspension was stirred at -78 C for 5 minutes then warmed to 0 C and stirred for an additional 30 minutes. The mixture was warmed to room temperature and stirred for 2,5 hours then quenched with saturated aqueous NH4C . The aqueous mixture was extracted with EtOAc (2 x). The combined EtOAc extracts were dried over Na2S04, filtered, concentrated to dryness and chromatographed (EtOAc/DCM) to provide the title compound.

I am very proud of our efforts over the past few months and hope to 1-Methyl-1H-1,2,3-triazole help many people in the next few years.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

S News Analyzing the synthesis route of 16681-65-5

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1-Methyl-1H-1,2,3-triazole, hurry up and to see.

Reference of 16681-65-5, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

intermediate 6: step a(1-methyl-1H-1,2,3-triazol-5-yl)(1-methyl-1H-imidazol-5-yl)methanolA solution of 1 -methyl- lH- l ,2,3-triazole (1 .47 g, 17.7 mmol, PCT Int. Appl. 2008098104) in 20 mL THF was cooled to -40 C in a dry-ice/acetonitrile bath. -Butyllithium (1.6 M in hexane, 10.2 mL, 16.3 mmol) was added dropwise via syringe and the mixture was stirred at -40 C for 30 minutes. A solution of 1 -methyl- 1 H-imidazole-5-carbaldehyde (1.50 g, 13.6 mmol) in 10 mL THF was then added and the mixture was stirred for 5 minutes, then was transferred to an ice/water bath. After 1 hour, the mixture was quenched by addition of saturated aqueous NPLCl, diluted with water, and extracted twice with EtOAc. The aqueous phase, which contained the title compound, was then concentrated. The residue wras purified by flash column chromatography (silica gel, gradient 3-10% MeOH-DCM) to afford the title compound as a light yellow foam.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1-Methyl-1H-1,2,3-triazole, hurry up and to see.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; BARBAY, Kent; EDWARDS, James, P.; KREUTTER, Kevin, D.; KUMMER, David, A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald, L.; WOODS, Craig, R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell, D.; LEONARD, Kristi, A.; WO2015/57203; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

S-21 News Now Is The Time For You To Know The Truth About 16681-65-5

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1-Methyl-1H-1,2,3-triazole, hurry up and to see.

Application of 16681-65-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A 2.5 M solution of n-butyllithium in hexanes (9.60 mL, 24.0 mmol) was added dropwise to a stirring solution of 1-methyl-1H-1,2,3-triazole (2.00 g, 24.0 mmol, prepared according to PCT Int. Appl., 2008098104) in dry THF (100 mL) at -50 C. The reaction became heterogeneous and yellow during addition. After 15 min, a solution of tert-butyl 3-formylazetidine-1-carboxylate (4.45 g, 24.0 mmol) in dry THF (10 mL) was added dropwise by syringe. The reaction mixture became homogeneous and was allowed to slowly warm to 0 C. Water (10 mL) and ethyl acetate (100) mL were added. The biphasic mixture was warmed to 23 C. The mixture was partitioned between half-saturated aqueous sodium chloride solution (100 mL) and ethyl acetate (300 mL). The layers were separated. The organic layer was dried with sodium sulfate and the dried solution was filtered. Celite (14 g) was added to the filtrate and the solvents were removed by rotary evaporation to provide a free-flowing powder. The powder was loaded onto a silica gel column. Elution with ethyl acetate initially, grading to 5% methanol-ethyl acetate provided the title compound as a white foam.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1-Methyl-1H-1,2,3-triazole, hurry up and to see.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Pierce, Joan; Goldberg, Steven; Fourie, Anne; Xue, Xiaohua; US2014/107094; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

14-Sep-21 News Continuously updated synthesis method about 16681-65-5

I am very proud of our efforts over the past few months and hope to 1-Methyl-1H-1,2,3-triazole help many people in the next few years.

Electric Literature of 16681-65-5, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

1-Methyl-1H-1,2,3-triazole was prepared according to the literature reference W02008/98104. To a 2 L flask containing 1-methyl-1H-1,2,3-triazole (9 g, 108.3 mmol) was added THF (1500 mL) and the solution was cooled to -40 C. To this colorless homogeneous solution was added n-butyllithium (2.5 M in hexanes, 45 mL, 112.5 mmol) dropwise which immediately afforded a dark brown viscous mixture. The mixture was kept between -10 to -20 C. for 60 minutes, then a THF solution of 2,4-dimethylthiazole-5-carbaldehyde (17.2 g, 121.8 mmol in 200 mL THF) was introduced via cannula. Once the aldehyde was added the reaction was allowed to warm to room temperature. After 3 hours, the reaction was quenched by pouring it into a saturated solution of aqueous NH4Cl. The aqueous portion was extracted with EtOAc in portions, 7*400 mL. The combined organics were washed with brine, dried over MgSO4, filtered and concentrated to afford a brown oil. Chromatography on silica gel (10% acetone-DCM increasing to 50% acetone and increasing to 10% MeOH-DCM) provided the title compound as an amber solid.

I am very proud of our efforts over the past few months and hope to 1-Methyl-1H-1,2,3-triazole help many people in the next few years.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; US2015/105404; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

September 10,2021 News What I Wish Everyone Knew About 16681-65-5

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1-Methyl-1H-1,2,3-triazole is helpful to your research.

Synthetic Route of 16681-65-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a 2-necked flask containing 1 -methyl-1 H-[1 ,2,3]triazole (162.91 mg; 1.96 mmol; 1.05 eq.) is added anhydrous THF (4.00 ml_) and the solution is cooled between -40 to -20C. To this colorless solution n-BuLi in hexane 1 .6M (1 .23 ml; 1 .96 mmol; 1 .05 eq.) is added dropwise. After stirring at 0C for 1 hour, a solution of pyridine-3-carbaldehyde (175.28 L; 1.87 mmol; 1 .00 eq.) in anhydrous THF (3.00 mL) is added and the reaction mixture is stirred for 3 h. After this time, RM is quenched by pouring into a saturated solution of NH4CI. Aqueous phase is extracted 3 times with n-BuOH. Organic layer is dried over Na2S04, filtered and concentrated in vacuo to obtain: (3-methyl- 3H-[1 ,2,3]triazol-4-yl)-pyridin-3-yl-methanol (243.00 mg; yield 66 %; 99 % by UPLC) is obtained as a beige oil.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1-Methyl-1H-1,2,3-triazole is helpful to your research.

Reference:
Patent; SELVITA S.A.; FABRITIUS, Charles-Henry Robert Yves; NOWAK, Mateusz Oktawian; WIKLIK, Katarzyna Anna; SABINIARZ, Aleksandra Barbara; BIE?, Marcin Dominik; BUDA, Anna Ma?gorzata; GUZIK, Pawel Szczepan; JAKUBIEC, Krzysztof Roman; MACIUSZEK, Monika; KWIECI?SKA, Katarzyna; TOMCZYK, Mateusz Micha?; GA??ZOWSKI, Micha? Miko?aj; GONDELA, Andrzej; DUDEK, ?ukasz Piotr; (681 pag.)WO2016/180536; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

9/9/2021 News You Should Know Something about 16681-65-5

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 16681-65-5.

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 1-Methyl-1H-1,2,3-triazole

The title compound was prepared according to No. WO2008 / 135826 International Patent Application Publication. In 1-methyl -1H-1,2,3- triazole (1.0g, 12.0 mmol, prepared according to International Patent Application No. 2008098104) 50 mL 2-neck flask containing, by the addition of THF (45 mL) , colorless solution was cooled to -40 . Then, by adding dropwise the (2.5 M, 4.8 mL, 12.0 mmol in hexane) n-BuLi, to give a dark reddish brown viscous solution. The mixture was stirred for 45 minutes at -30 to -20 in the following, was introduced into a pure DMF (3mL, 38.5 mmol) at -10 . The mixture was allowed to warm to room temperature, after stirring for 60 minutes, poured into water. Extract the aqueous portion with EtOAc (4 × 50 mL), the combined organics washed with brine, dried with MgSO4, filtered, and concentrated. The aqueous portion was extracted with DCM (3 × 50 mL) station, and dried as described above. The combined organics were concentrated to give a light brown oil The UV activity much higher than the starting material. DCM-25% CH3CN, according to TLC or of from 25% EtOAc-DCM, showed the product has a slightly higher Rf than the starting material. (With 100% DCM, 25% CH3CN-DCM increased) by silica gel chromatography on to give the title compound as a colorless oil.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 16681-65-5.

Reference:
Patent; Janssen Pharmaceuticals N.V; Leonardo, Christi.A.; Barvei, Kent; Edward, James P.; Gloita, Kevin D.; Kummer, David .A.; Maharoof, Umar; Nishimura, Rachael; Urbanski, Mode; Venkatesan, Hariharan; Wang, Ai Hua; Olin, Ronald L.; Woods, Craig; Fourier, Anne; Shu, Jih; Cumings, Maxwell D.; (86 pag.)KR2016/68948; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7-Sep-2021 News Brief introduction of 16681-65-5

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 1-Methyl-1H-1,2,3-triazole help many people in the next few years.

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C3H5N3

To a flask containing 1-methyl-1H-1,2,3-triazole (150 mg, 1.81 mmol) was added THF (15 mL) and the colorless homogeneous solution was cooled to -43 C. using a CH3CN-CO2 bath. n-BuLi (2.5M in hexanes, 0.7 mL, 1.75 mmol) was added drop wise via syringe which afforded an opaque mixture. The suspension was stirred at -40 C. for 30 min, then a THF solution of tert-butyl-3-(4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinoline-6-carbonyl)azetidine-1-carboxylate (430 mg, 0.8 mmol, in 2 mL THF, Intermediate 66: step b) was introduced at -40 C. The reaction mixture was allowed to warm gradually to room temperature over 45 min and then quenched with NH4Cl solution. The aqueous portion was extracted with EtOAc (3*30 mL) and the combined organics were washed with brine, dried over MgSO4, filtered and concentrated to provide an amber gum. Chromatography on silica gel (10% acetone-hexane increasing to 30% acetone) afforded the title compound (170 mg) as a white amorphous solid. 1H NMR (500 MHz, CDCl3) delta 8.24 (d, J=2.1 Hz, 1H), 7.78 (d, J=8.8 Hz, 1H), 7.56-7.47 (m, 3H), 7.40 (d, J=8.1 Hz, 2H), 7.35 (dd, J=8.7, 2.1 Hz, 1H), 4.35 (s, 2H), 4.20 (t, J=8.8 Hz, 1H), 4.07 (s, 3H), 4.00 (dd, J=9.3, 5.6 Hz, 1H), 3.92 (dd, J=8.9, 5.7 Hz, 1H), 3.67 (s, 3H), 3.62 (t, J=8.8 Hz, 1H), 3.52-3.38 (m, 1H), 1.38 (s, 9H). MS (ESI): mass calcd. for C30H31ClF3N5O4: 618.06, m/z found 619.9 [M+H]+.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 1-Methyl-1H-1,2,3-triazole help many people in the next few years.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Pierce, Joan; Goldberg, Steven; Fourie, Anne; Xue, Xiaohua; US2014/107094; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics