Category: 41253-21-8

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 41253-21-8

To 1.5 kg of crude alpha,alpha,alpha’,alpha’-tetramethyl-5-bromomethyl-1,3-benzene-diacetonitrile 5 (purity > 80%, about 3 mol) in 7.5 1 DMF 0.275 kg 1,2,4-triazole sodium (3 mol) were added. The mixture was stirred at room temperature for 1 hr. After completion, 10 1 ethyl acetate and 25 1 water were added. The mixture was stirred for about 10 minutes and then phase separated. To the aqueous layer 5 1 ethyl acetate were added. The mixture was stirred for about 10 minutes and then phase separated. The aqueous layer was discarded, and the organic layers were combined. The combined organic layers were washed with 10 1 water twice. The organic layer was concentrated to dryness to obtain the crude anastrozole 6 (90 %, purity > 60%). The crude product was purified by flash column chromatography (silica) using ethyl acetate as eluent (purity > 98%). Finally, the pre-purified anastrozole was re-crystallised from ethyl acetate/cyclohexane (1:2) to obtain 6 with a purity of more than 99.9%. Yield 34 %.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 41253-21-8, and we look forward to future research findings.

Reference:
Patent; Helm AG; EP1705168; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 41253-21-8, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(3) Synthesis of intermediate 5-(4-chlorobenzyl)-2-methoxymethoxymethyl-2-methyl-1-(1H-1,2,4-triazol-1-ylmethyl)cyclopentanol (Compound (VII), R1 =CH3, Ym =4-Cl, G=CH2OCH3, A=N)1H-1,2,4-Triazole sodium salt (1.196g, 13.1 mmol) was dissolved in NMP (7 ml), and heated to an internal temperature of 115 degrees C. To this, 5-(4-chlorobenzyl)-2-methoxymethoxymethyl-2-methylcyclopentanone (Compound (IX), R1 =CH3, Ym =4-Cl, G=CH2OCH3) (2.60 g, 8.76 mmol) was added, and washed thoroughly with NMP (1.8 ml). After the internal temperature became 115 degrees C again, sodium t-butoxide (505 mg, 5.26 mmol) and trimethylsulfoxonium bromide (2.2379 g, 1.476 mmol) were added in portions over about 3 hours. After completion of the addition, stirring was conducted at the same temperature for 75 minutes. The reaction solution was cooled to 35 degrees C, and then, to the reaction solution, water was added and extraction with ethyl acetate was conducted. The organic layer was washed with water and saturated brine, and dried over anhydrous sodium sulfate. The solvent was distilled away and the residue was subjected to silica gel column chromatography (eluent; hexane:ethyl acetate =3:1 to 0:1) for purification to obtain the desired substance. Product: 2.36 gYield: 71 %Description: Colorless viscous oil

In the meantime we’ve collected together some recent articles in this area about 41253-21-8 to whet your appetite. Happy reading!

Reference:
Patent; KUREHA CORPORATION; ARAKI, Nobuyuki; YAMAZAKI, Toru; KUSANO, Nobuyuki; IMAI, Eiyu; KANNO, Hisashi; MORI, Masaru; MIYAKE, Taiji; WO2011/70771; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 41253-21-8

This was made by displacing the 4-chloro phthalazine (Compound 195) with the sodium salt of 1,2, 4-triazole in DMF at55-65 C. BOCNH-P3 (L-tert-BuGly)-P2[(4R)-(4-(1, 2,4-triazo-1-yl) phthalazine-1-oxo)-S-proline]-Pl (1R,2S Vinyl Acca)-CONHSO2-Cyclopropane : the material was obtained as a white foam in 62% yield. LC/MSRt-min (MNa+) [method C]: 3.35 (774). 1H NMR (500 MHz, CD30D)8 ppm 0.97 (s, 9 H) 1. 01 (m, 2 H) 1.10 (s, 9 H) 1.16 (m,1 H) 1.37 (m, 2 H) 1.82 (m,1 H) 2.18 (d, J=8. 55 Hz,1 H) 2.32 (m,1 H) 2.69 (dd, J=13. 58,6. 87 Hz,1 H) 2.88 (br s,1 H) 4.06 (d,J=11. 60 Hz,1 H) 4.13 (s,1 H) 4.53 (m, J=9. 16 Hz,1 H) 4.61 (d,J=11. 90 Hz,1 H) 5.06 (d, J=10. 07 Hz,1 H) 5.23 (d,J=17. 40 Hz,1 H) 5.68 (m,1 H) 5.98 (s, 1 H) 7.97 (m, 2 H) 8.30 (m,J=11. 90 Hz, 2 H) 8.44 (d, J=7. 63 Hz,1 H) 9.14 (s, 1 H).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about Sodium 1,2,4-triazol-1-ide, in my other articles.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; WO2003/99274; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C2H2N3Na

Compound 485; Synthesis of (4-hvdroxy-3,5-dimethochiyphenylY5-thiazol-2-yl-2-r 1 ,2,41 thiazol- 1 -yl-phenyl)methanone; Compound 347 [(5-(thiazol-2-yl)-2-(lH-l,2,4-triazol-l-yl)phenyl)(3,4,5- trimethoxyphenyl)methanone] (41.7 mg, 0.1 mmol) was dissolved in DMF (3 ml), and 1,2,4-triazole-Na (27 mg) was added thereto at room temperature. The mixture was reacted at 130C for 12 hours. After completion of the reaction, the reaction mixture was cooled to room temperature, and diluted with an EtOAc solution. The organic layer was washed with a saturated ammonium chloride solution, water, and brine. The extracted organic layer was dried over anhydrous MgSO4, and the solid substance was filtered off. The filtrate was vacuum evaporated to remove the solvent. The resulting residue was purified by column chromatography (SiO2, CH2Cl2/MeOH=40/l?10/l) to obtain Compound 485 (78.7 mg, 73%) in a form of a white solid.1H NMR (CDCl3) delta 8.375 (brs, IH), 8.345 (dd, J = 10.5, 8.40, IH), 8.173 (d, J= 2.10 Hz, IH), 7.965 (m, 2H), 7.773 (d, J= 8.40 Hz, IH), 7.476 (d, J = 3.0 Hz, IH), 3.857 (s, 6H). MS (ESI) m/z 409 (M+ + H).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about Sodium 1,2,4-triazol-1-ide, in my other articles.

Reference:
Patent; CHONG KUN DANG PHARMACEUTICAL CORP.; WO2008/38955; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world.41253-21-8, name is Sodium 1,2,4-triazol-1-ide belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C2H2N3Na

(2) Production Example 2-2 (0100) 3.24 mmol of compound 4-a was dissolved in 3.2 mL of dimethylacetamide, and heated to 85 C. 4.85 mmol of a sodium salt of 1,2,4-triazole and 4.53 mmol of TMSOB were added to the obtained solution. Next, 1.64 mmol of a 28% methanol solution of sodium methoxide was added intermittently over a period of 50 minutes, after which a reaction was allowed to progress for 50 minutes. Following completion of the reaction, azole derivative 6-a was obtained using the same method as that used in Production Example 2-1 above. The purity was 99.1%.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of Sodium 1,2,4-triazol-1-ide ,and how the biochemistry of the body works.

Reference:
Patent; Kureha Corporation; Masano, Taiga; Sudo, Keiichi; US2015/218134; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 41253-21-8, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A suspension of 2-fluorobenzylnitrile (3.0 g, 25 mmol) and 1,2,4-triazole sodium salt (2.4 g, 27 mmol) were stirred in tetrahydrofuran (7 mL) and dimethylformamide (14 mL) at 95 C. for 18 h. After cooling and concentrating, the product was crystallized from hot CH2Cl2/hexane (1:1) to give the title compound as a white solid (4.25 g, 100% yield). 1H-NMR (300 MHz, CDCl3) delta ppm: 8.74 (1H, s), 8.16 (1H, s), 7.82 (1H, dd, J=4.9,1.3 Hz), 7.77-7.25 (2H, m), 7.57-7.51 (1H, m). LCMS [M+H]+ calcd for C9H7N4: 171.06; found: 171.12.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about Sodium 1,2,4-triazol-1-ide is helpful to your research.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/111984; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C2H2N3Na

First, 3.8 g of 1,2,4-triazole were dissolved in 8 ml of NMP at 2O0C. Then,2.2 g of NaOH and 22 ml of NMP were added in portions over 1 hour, maintaining the temperature at less than 350C. The solution was stirred for 2 hours at 20C, and 7.8 g of Na2SO4 were then added. After filtration of the solid, the resulting solution was transferred to a dropping funnel, and added over 75 minutes to a solution of 14 g of crude l,3-benzenediacetonitrile-5-(bromomethyl)-alpha,alpha,alpha’,alpha’ tetramethyl (having a purity of 81.8%, containing: 3,5-bis(2-cyanoisopropyl)toluene 4.0%, l,l-dibromo-3,5-bis(2- cyanoisopropyl)toluene 10.7%, and other impurities 3.5% ) in 20 ml of NMP, cooled to -3O0C. At the end of the addition, the suspension was stirred at -300C for 18 hours, and monitored via HPLC. When the concentration of starting material is less than 0.5 percent, an amount of acetic acid sufficient to give a pH of about 6.5 to about 7.0 is added (an HPLC analysis of the crude reaction mixture showed: residual starting material 0.4%, Anastrozole 68.9%, Isoanastrozole 5.5%, 3,5-bis (2-cyanoisopropyl)toluene 7.5%, 1,1-dibromomethyl- 3,5-bis(2-cyanoisopropyl)benzene, and 15.4%, and other impurities 2.3%.). The mixture is then allowed to warm slowly to 200C, filtered, and 37 ml of toluene, 75 ml of heptane, and 37 ml of water are added. The biphasic system is stirred vigorously for 30 minutes, and the organic layer is then separated. Water, toluene, and heptane in amounts of 25 ml, 25 ml, and 50 ml, respectively, are added to the aqueous phase, and the system is stirred for 30 minutes before the organic phase is separated. Then, 10 ml of toluene and 20 ml of heptane are added to the aqueous phase, and the system is stirred for 30 minutes before the organic phase is separated. Toluene and water, 99 ml and 400 ml, respectively, are added to the aqueous phase, and the resulting biphasic system is stirred for 1 hour. The organic layer is separated and washed 3 times with a mixture of MeOH and water (3 ml and 21 ml, respectively). The final organic phase is concentrated to 45 ml under reduced pressure at 400C, and 45 ml of heptane are added dropwise over 1 hour. The resulting suspension is cooled to 00C, stirred for 1 hour, and filtered. The crude solid is dissolved in toluene (40 ml) at 4O0C, and heptane (40 ml) is slowly added under stirring. The suspension is cooled to 00C, stirred for 1 hour, EPO and filtered. The solid is driejd at 55C under reduced pressure until constant weight is achieved, yielding 5.8 g of product with a purity as follows: Anastrozole 98.45%, Isoanastrozole 0.09%, 3,5-bis (2-cyanoisopropyl)toluene 0.06%, l-bromo-3,5-bis (2- cyanoisopropyl)toluene 0.11%, l,l-dibromo-3,5-bis(2-cyanoisopropyl)toluene 0.07%, other impurities 1.22% are by HPLC.

If you are hungry for even more, make sure to check my other article about 41253-21-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SICOR, INC.; WO2006/108155; (2006); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 41253-21-8, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

(4) Synthesis of 5-(4-chlorobenzyl)-2,2-bis-methoxymethoxymethyl-1-[1,2,4]triazol-1-ylmethylcyclopentanol (Compound (XXIV), G2=CH2OCH3, Ym=4-Cl, A=N)[1,2,4]-Triazole sodium salt (526 mg, 5.78 mmol) was dissolved in NMP (3 ml), and heated to an internal temperature of 115 degrees C. To this, 1 ml of a solution of 5-chlorobenzyl-2,2-bis-methoxymethoxymethyl-cyclopentanone (Compound No. (Compound (XXII), G2=CH2OCH3, Ym=4-Cl) 1.374g (3.85 mmol) in NMP was added. To this solution, sodium t-butoxide 333mg (3.47 mmol) and TMSOB 1.193 g (6.87 mmol) were added in portions while conducting the reaction at 115 degrees C for 5 hours. After completion of the reaction, the reaction solution was cooled to 35 degrees C, combined with 15 ml of water, and extracted with ethyl acetate. The organic layer was washed with water and saturated brine, dried over anhydrous sodium sulfate. The solvent was distilled away and the residue was subjected to silica gel column chromatography (eluent; ethyl acetate) for purification to obtain the desired substance. Product: 680.2 mgYield: 40.2 %Description: Colorless viscous liquid1H-NMR (CDCl3) delta:1.47-1.56 (1 H, m), 1.60-1.80 (2 H, m), 1.73-1.83 (1 H, m), 2.17 (1 H, dd, J = 13.2, 4.0 Hz), 2.22-2.31 (1 H, m), 2.44 (1 H, dd, J = 13.2, 10.3 Hz), 3.31 (3 H, s), 3.33 (1 H, d, J = 9.7 Hz), 3.38 (3 H, s), 3.46 (1 H, d, J = 9.7 Hz), 3.59 (2 H, s), 4.32 (1 H, d, J = 14.2 Hz), 4.41 (1 H, s), 4.45 (1 H, d, J = 6.4 Hz), 4.48 (1 H, d, J = 6.4 Hz), 4.54 (1 H, d, J = 14.2 Hz), 4.64 (2 H, s), 7.04 (2 H, d, J = 8.4 Hz), 7.21 (2 H, d, J = 8.4 Hz), 7.95 (1 H, s), 8.24 (1 H, s).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about Sodium 1,2,4-triazol-1-ide.

Reference:
Patent; KUREHA CORPORATION; ARAKI, Nobuyuki; YAMAZAKI, Toru; KUSANO, Nobuyuki; IMAI, Eiyu; KANNO, Hisashi; MORI, Masaru; MIYAKE, Taiji; WO2011/70771; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 41253-21-8, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

At room temperature, 113g of acetonitrile was added to the four-necked flask.1,2,4-triazole sodium salt (18.20 g, 0.2 mol),2,4′-Dichloroacetophenone (37.80 g, 0.2 mol), heated to 80-85 C,The reaction was 1-2 h, the reaction was completed, the solvent was evaporated to dryness under reduced pressure, 50 g of water was added, and extracted with 150 g of dichloromethane, and washed with water.The solvent was dried to give a white solid with a qualitative content of 98%.The weight yield was 96%.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about Sodium 1,2,4-triazol-1-ide, hurry up and to see.

Reference:
Patent; Huai’an Guorui Chemical Co., Ltd.; Wu Yaojun; Zhang Pu; Zhao Wei; Jin Yucun; Wang Fengyun; Chen Mingguang; Mao Gengsheng; (11 pag.)CN109553583; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 41253-21-8, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

2-(1H-1,2,4-Triazol-1-yl)benzonitrile. A suspension of 2-fluorobenzylnitrile (3.0 g, 25 mmol) and 1,2,4-triazole sodium salt (2.4 g, 27 mmol) were stirred in tetrahydrofuran (7 mL) and dimethylformamide (14 mL) at 95 C. for 18 h. After cooling and concentrating, the product was crystallized from hot CH2Cl2/hexane (1:1) to give the title compound as a white solid (4.25 g, 100% yield). 1H-NMR (300 MHz, CDCl3) delta ppm: 8.74 (1H, s), 8.16 (1H, s), 7.82 (1H, dd, J=4.9, 1.3 Hz), 7.77-7.25 (2H, m), 7.57-7.51 (1H, m). LCMS [M+H]+ calcd for C9H7N4: 171.06. found: 171.12

I am very proud of our efforts over the past few months and hope to Sodium 1,2,4-triazol-1-ide help many people in the next few years.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/129379; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics