Category: 4923-01-7

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 5-Methyl-4H-1,2,4-triazol-3-amine

General procedure: A solution of 21% (w/v) sodium ethoxide (9.13 mL, 24.46 mmol) in ethanol was added to a solution of 3-methyl-1H-1,2,4-triazol-5-amine (2 g, 20.39 mmol) and diethylmalonate (3.42 mL, 22.42 mmol) in Ethanol (10 mL) in a 100 mL round bottomed flask. The resulting mixture was stirred at 75 C overnight. The reaction mixture was cooled and the resulting precipitate was filtered and rinsed with EtOH. The solid was air dried to yield an off white solid (2.84g, 84%). 1H NMR (400 MHz, DEUTERIUM OXIDE) ppm 2.21 (s, 3 H) 4.87 (s, 1 H); LC/MS: MS(ES+) m/e 167 (MH+).

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 4923-01-7

Reference:
Article; Sanchez, Robert M.; Erhard, Karl; Hardwicke, Mary Ann; Lin, Hong; McSurdy-Freed, Jeanelle; Plant, Ramona; Raha, Kaushik; Rominger, Cynthia M.; Schaber, Michael D.; Spengler, Michael D.; Moore, Michael L.; Yu, Hongyi; Luengo, Juan I.; Tedesco, Rosanna; Rivero, Ralph A.; Bioorganic and Medicinal Chemistry Letters; vol. 22; 9; (2012); p. 3198 – 3202;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 4923-01-7, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine, molecular formula is C3H6N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: A solution of aminotriazole 11a-m (3.1mmol), glacial acetic acid (5mL), and diethyl ethoxymethylenemalonate (4.6mmol) was refluxed for 3h. After cooling to room temperature, the resulting precipitate was collected by filtration, washed with cold water and dried. The residue was stirred with cold ethyl ether (20mL) and filtered to afford the desired product. Following general procedure C, compound 12b was isolated as a pale yellow solid 70%, mp=237C dec. 1H NMR (200MHz, DMSO-d6) delta: 12.9 (br s, 1H); 8.58 (s, 1H); 4.28-4.17 (q, J=7.4Hz, 2H); 2.38 (s, 3H); 1.31-1.27 (t, J=7Hz, 3H)

I am very proud of our efforts over the past few months and hope to 5-Methyl-4H-1,2,4-triazol-3-amine help many people in the next few years.

Reference:
Article; Aghazadeh Tabrizi, Mojgan; Baraldi, Pier Giovanni; Ruggiero, Emanuela; Saponaro, Giulia; Baraldi, Stefania; Poli, Giulio; Tuccinardi, Tiziano; Ravani, Annalisa; Vincenzi, Fabrizio; Borea, Pier Andrea; Varani, Katia; European Journal of Medicinal Chemistry; vol. 113; (2016); p. 11 – 27;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C3H6N4

General procedure: 3-Amino-1,2,4-triazole 8a-f (1.0 mmol), o-hydroxybenzaldehyde9a-e (1.0 mmol), acetone (10) (0.22 ml,3.0 mmol), and abs. EtOH (2 ml) were mixed in amicrowave process vial, and then 4 N solution of HCl indioxane (0.07 ml, 0.3 mmol) was added. The mixture wasirradiated at 150C for 30 min. The reaction mixture wascooled by an air flow and stirred for 24 h at roomtemperature for complete precipitation of the product. Theprecipitate was filtered off, washed with EtOH (1 ml) andEt2O (3×1 ml), and dried. Compounds 1a-w were obtainedin a form of white solids.2,5-Dimethyl-11,12-dihydro-5,11-methano[1,2,4]triazolo[1,5-c][1,3,5]benzoxadiazocine (11a). Yield 48%,mp 310-311C. IR spectrum, nu, cm-1: 757, 1091, 1138,1325, 1485, 1548, 1625, 2885, 2922, 3070, 3421. 1H NMRspectrum, delta, ppm: 7.76 (1H, s, NH); 7.33-7.26 (1H, m,H Ar); 7.20-7.12 (1H, m, H Ar); 6.98-6.90 (1H, m, H Ar);6.82-6.76 (1H, m, H Ar); 4.52 (1H, s, 11-CH); 2.30 (2H, s,13-CH2); 2.02 (3H, s, 2-CH3); 1.91 (3H, s, 5-CH3).13C NMR spectrum, delta, ppm: 157.3 (C); 153.9 (C); 151.0(C); 130.0 (CH); 129.4 (CH); 124.4 (C); 121.2 (CH); 116.7(CH); 82.3 (C); 44.3 (CH); 32.3 (CH2); 24.0 (CH3); 14.2(CH3). Mass spectrum, m/z: 242 [M]+. Found, %: C 64.34;H 5.54; N 23.29. C13H14N4O. Calculated, %: C 64.45;H 5.82; N 23.12.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 5-Methyl-4H-1,2,4-triazol-3-amine, in my other articles.

Reference:
Article; Guemue?, Mustafa K.; Gorobets, Nikolay Yu.; Sedash, Yuriy V.; Chebanov, Valentin A.; Desenko, Sergey M.; Chemistry of Heterocyclic Compounds; vol. 53; 11; (2017); p. 1261 – 1267; Khim. Geterotsikl. Soedin.; vol. 53; 11; (2017); p. 1261 – 1267,7;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 4923-01-7, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine, molecular formula is C3H6N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: Method I. A mixture of Py (4.4 ml) and AcOH (3.0 ml) was stirred and treated by the addition of 5-aminoazole1a-h (0.01 mol) and (2E)-(3-morpholin-4-yl)-acrylonitrile (2) (1.38 g, 0.01 mol). The obtained mixture was refluxed at 150C for 5 h. After refluxing, the mixture was cooled. The precipitate that formed was filtered off, washed with a small amount of EtOH, and dried. Method II. A solution (or suspension) of the appropriate aminoazole 1a-h (0.01 mol) in solvent (15 ml) (EtOH in the case of compound 3a, dioxane in the case of compounds 3b-h) was stirred at 50C and treated by adding 3,3-diethoxypropionitrile (4) (1.5 ml, 0.01 mol), then 36% HCl solution (0.86 ml, 0.01 mol). The reaction mixture was refluxed for 2.5-3 h, the suspension (or solution) was cooled to room temperature, and the target product was isolated by the method indicated for each particular compound.

I am very proud of our efforts over the past few months and hope to 5-Methyl-4H-1,2,4-triazol-3-amine help many people in the next few years.

Reference:
Article; Gazizov, Denis A.; Fedotov, Victor V.; Gorbunov, Evgeny B.; Ulomskiy, Evgeny N.; Yeltsov, Oleg S.; Rusinov, Gennady L.; Rusinov, Vladimir L.; Chemistry of Heterocyclic Compounds; vol. 55; 6; (2019); p. 573 – 577; Khim. Geterotsikl. Soedin.; vol. 55; 6; (2019); p. 573 – 577,5;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C3H6N4

General procedure: Method I. A mixture of Py (4.4 ml) and AcOH (3.0 ml) was stirred and treated by the addition of 5-aminoazole1a-h (0.01 mol) and (2E)-(3-morpholin-4-yl)-acrylonitrile (2) (1.38 g, 0.01 mol). The obtained mixture was refluxed at 150C for 5 h. After refluxing, the mixture was cooled. The precipitate that formed was filtered off, washed with a small amount of EtOH, and dried. Method II. A solution (or suspension) of the appropriate aminoazole 1a-h (0.01 mol) in solvent (15 ml) (EtOH in the case of compound 3a, dioxane in the case of compounds 3b-h) was stirred at 50C and treated by adding 3,3-diethoxypropionitrile (4) (1.5 ml, 0.01 mol), then 36% HCl solution (0.86 ml, 0.01 mol). The reaction mixture was refluxed for 2.5-3 h, the suspension (or solution) was cooled to room temperature, and the target product was isolated by the method indicated for each particular compound.

If you are hungry for even more, make sure to check my other article about 4923-01-7, the application of this compound in the production field has become more and more popular.

Reference:
Article; Gazizov, Denis A.; Fedotov, Victor V.; Gorbunov, Evgeny B.; Ulomskiy, Evgeny N.; Yeltsov, Oleg S.; Rusinov, Gennady L.; Rusinov, Vladimir L.; Chemistry of Heterocyclic Compounds; vol. 55; 6; (2019); p. 573 – 577; Khim. Geterotsikl. Soedin.; vol. 55; 6; (2019); p. 573 – 577,5;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 4923-01-7

General procedure: Solution A. A solution of KOH (0.56 g, 0.01 mol) and potassium salt of ethyl nitrocyanoacetate (1.96 g, 0.01 mol) in2 (8 ml) was stirred at room temperature for 3 h, then kept overnight. 4 M aqueous KOAc (8 ml, 0.03 mol) was added to the resulting solution, and the mixture cooled to 5. A mixture of 3-aminoazole 1a-i (0.010 mol), EtOH (10 ml),H2O (10 ml), and concentrated HCl (2.5 ml, 0.030 mol)was treated with a solution of NaNO2 (0.759 g, 0.011 mol)in H2O (3 ml) at -5 . The reaction mixture was kept at this temperature for 10 min, then added to the solution A. The mixture was kept at room temperature for 1 h; the formed precipitate was filtered, stirred with 40% aqueous H2SO4 (10 ml) (AcOH (10 ml) was used for compound 4e), filtered, and dried. The obtained hydrazone 3a-i was heated under reflux in DMF for 3 h. The solvent was evaporated, the residue triturated in water, filtered, and dried.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 4923-01-7, and we look forward to future research findings.

Reference:
Article; Voinkov, Egor K.; Ulomskiy, Eugeny N.; Rusinov, Vladimir L.; Chupakhin, Oleg N.; Gorbunov, Evgeny B.; Drokin, Roman A.; Fedotov, Victor V.; Chemistry of Heterocyclic Compounds; vol. 51; 11-12; (2015); p. 1057 – 1060; Khim. Geterotsikl. Soedin.; vol. 51; 11-12; (2015); p. 1057 – 1060,4;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 4923-01-7, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine, molecular formula is C3H6N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of 25. Og 3-amino-5-methyltriazole and 66.0ml_ diethyl phenylmalonate in 100ml_ N,N-dibutylbutan-1 -amine was stirred at 185C for 20h. The reaction mixture consisted of two layers after cooling to room temperature. The top layer was removed and the lower layer was diluted with 10% w/w sodium hydroxide solution and water. The aqueous layer was extracted with diethyl ether and acidified with concentrated hydrochloric acid until precipition of the product was complete. The precipitate was collected by filtration to yield the product, which was used without further purification.MS (M+1 ): 243Characteristic 1 H NMR (200MHz, d6-DMSO) signals: 7.4 (m, 2H); 7.3 (m, 2H); 7.2 (m, 1 H); 2.4 (s, 3H) ppm.

This is the end of this tutorial post, and I hope it has helped your research about 4923-01-7!

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; INCE, Stuart; REHWINKEL, Hartmut; HAEGEBARTH, Andrea; POLITZ, Oliver; NEUHAUS, Roland; BOeMER, Ulf; WO2012/7416; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 5-Methyl-4H-1,2,4-triazol-3-amine

General procedure: 3-Amino-1,2,4-triazole 8a-f (1.0 mmol), o-hydroxybenzaldehyde9a-e (1.0 mmol), acetone (10) (0.22 ml,3.0 mmol), and abs. EtOH (2 ml) were mixed in amicrowave process vial, and then 4 N solution of HCl indioxane (0.07 ml, 0.3 mmol) was added. The mixture wasirradiated at 150C for 30 min. The reaction mixture wascooled by an air flow and stirred for 24 h at roomtemperature for complete precipitation of the product. Theprecipitate was filtered off, washed with EtOH (1 ml) andEt2O (3×1 ml), and dried. Compounds 1a-w were obtainedin a form of white solids.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 5-Methyl-4H-1,2,4-triazol-3-amine ,and how the biochemistry of the body works.

Reference:
Article; Guemue?, Mustafa K.; Gorobets, Nikolay Yu.; Sedash, Yuriy V.; Chebanov, Valentin A.; Desenko, Sergey M.; Chemistry of Heterocyclic Compounds; vol. 53; 11; (2017); p. 1261 – 1267; Khim. Geterotsikl. Soedin.; vol. 53; 11; (2017); p. 1261 – 1267,7;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 5-Methyl-4H-1,2,4-triazol-3-amine

2-(2,3-Dihydrobenzofuran-5-yl)-N-(3-methyl-1H-1,2,4-triazol-5-yl)thiazole-4- To a mixture of 2-(2,3-dihydro-l-benzoruran-5~yl)-l,3-thiazole-4-carboxylic acid (126 mg, 0.51 mmol), lH-l ,2,4-triazol-5-amine (50 mg, 0.51 mmol) and 2-(lH-benzotriazole-l-yl)- 1 ,1 ,3,3-tetramethyluroniurn hexafluorophosphate (HBTU) (120 mg, 0.32 mmol) under stirring and heating at 1 10 C 2 ml of dry pyridine were added. The mixture was heated at 110 C for 5 h, pyridine was evaporated, and the residue was diluted with an aqueous Na2C03 solution. The resulting precipitate was filtered off, dissolved in hot NN-dimethylformamide, settled by addition of EtOAc and hexane, filtered off and dried. The product was obtained as a light yellow solid (82 mg, 0.25 mmol, 49 % yield). NMR (400 MHz, OMSO-d6, CC14) delta ppm 2.29 (3 H, bs, CH3), 3.30 (2 H, t, CH2CH20), 4.64 (2 H, t, OCH2), 6.80 (1 H, d, CH-arom.), 7.82 (1 H, d, CH-arom.), 8.00 (1 H, s, CH-arom.), 8.31 (1 H, bs, CH-thiazol), 1 1.20 (1 H, bs, NH), 12.95 (1 H, bs, NH). LC/MS [M+H]+: 328.0

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 4923-01-7

Reference:
Patent; 4SC DISCOVERY GMBH; LEBAN, Johann; ZAJA, Mirko; WO2014/202638; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 4923-01-7

Example 20A (rac)-Ethyl 7-(4-cyanophenyl)-2,5-dimethyl-4,7-dihydro[1,2,4]triazolo[1,5-a]pyrimidine-6-carboxylate Under an atmosphere of argon, ethyl 2-(4-cyanobenzylidene)-3-oxobutanoate (381 mg, 1.6 mmol) and 5-methyl-4H-1,2,4-triazole-3-amine (200 mg, 2.0 mmol, 1.3 eq.) were dissolved in DMF (4 ml), and solid sodium bicarbonate (659 mg, 7.8 mmol, 5 eq.) was added. The mixture was stirred at 65 C. for 12 h. The mixture was then filtered, and the DMF from the filtrate was distilled off under reduced pressure. The residue was purified by preparative HPLC (Gromsil C18 column, 30*250 mm; mobile phase: acetonitrile-water-0.1% TFA). After lyophilization, the product was obtained as a solid (300 mg, 46% of theory). LC-MS (Method 2): Rt=1.92 min; MS (ESIpos): m/z (%)=324.1 (100) [M+H]+; MS (ESIneg): m/z (%)=322.1 (100) [M-H]-. 1H-NMR (400 MHz, DMSO-d6): delta=1.0 (t, 3H), 2.1 (t, 3H), 2.4 (s, 3H), 3.4 (m, 2H), 6.25 (s, 1H), 7.4 (m, 2H), 7.8 (m, 2H), 10.75 (s, 1H).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 5-Methyl-4H-1,2,4-triazol-3-amine, in my other articles.

Reference:
Patent; BAYER SCHERING PHARMA AKTIENGESELLSCHAFT; US2012/4203; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics