Category: 74205-82-6

Electric Literature of 74205-82-6, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 74205-82-6, name is (1H-1,2,4-Triazol-1-yl)methanol, molecular formula is C3H5N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: To a solution of indolines 6 (1.0 mmol) dissolved in acid (1.0 ml) in an icebath was added (1H-1,2,4-triazol-1-yl)methanol 5 (ammount as given in Table 1). Themixture was then stirred under the temperature and time given in Table 1. After completion of the reaction (TLC), the reaction mixture was poured intoice water, and 20% NaOH solution was added slowly to adjust the pH to 9. The product was extracted with dichloromethane. After removal of the solvent, theresidue was chromatographed over silica gel using dichloromethane-methanol togive 7 (yield as given in Table 1). The analytical and spectroscopic data for 7b and 7c are given below

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 74205-82-6.

Reference:
Article; He, Yi; Li, Xiaolong; Li, Jue; Li, Xiaocen; Guo, Li; Hai, Li; Wu, Yong; Tetrahedron Letters; vol. 55; 29; (2014); p. 3938 – 3941;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 74205-82-6, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 74205-82-6, name is (1H-1,2,4-Triazol-1-yl)methanol, molecular formula is C3H5N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: A mixture containing 25 ml of acetonitrile, two equivalents of (3,5-dimethyl-1H-pyrazol-1-yl) methanol (compound 2), and one equivalent of N,N-Diethyl-propanediamine was stirred at room temperature for 4 days. Next, the solvent was concentrated at a reduced pressure, washed with brine and dichloromethane. The organic solution was dried with MgSO4, and the solvent was concentrated at reduced pressure to yield compound 3 as light yellow oil.

In the meantime we’ve collected together some recent articles in this area about 74205-82-6 to whet your appetite. Happy reading!

Reference:
Article; Bendaha, Hasnae; Yu, Lisa; Touzani, Rachid; Souane, Rachid; Giaever, Guri; Nislow, Corey; Boone, Charles; El Kadiri, Sghir; Brown, Grant W.; Bellaoui, Mohammed; European Journal of Medicinal Chemistry; vol. 46; 9; (2011); p. 4117 – 4124;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 74205-82-6, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 74205-82-6, name is (1H-1,2,4-Triazol-1-yl)methanol, molecular formula is C3H5N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

PREPARATION EXAMPLE A (COMPOUND NO. 15) 2-(4-Chloro-2-fluoro-5-ethoxycarbonylmethoxyphenyl)-4, 5,6,7-tetrahydro-2H-isoindole-1,3-dione (4.0 g, made substantially by the methods described in EP 0 083 055 A2) and KOH (85%, 2.1 g) in 50 ml ethanol were stirred at room temperature for 1 hour and then evaporated to dryness. To the residue was added 100 ml chloroform and 8 ml SOCl2. The reaction mixture was then heated to reflux for 2 hours. Potassium chloride was filtered and washed with fresh chloroform. The filtrate was evaporated to dryness. To the residue was added 50 ml chloroform and 1.5 g 1-hydroxymethyl-(1H)-1,2,4-triazole. The reaction mixture was then stirred at room temperature for 5 hours. Water was added to the mixture, the organic layer was separated and washed with water and brine, dried and concentrated. The residue was purified by silica gel column chromatography to give 2.1 g of 2-(4-chloro-2-fluoro-5-[(1,2,4-triazolylmethoxy)carbonylmethoxy]phenyl)-4,5,6,7-tetrahydro-2H-isoindole-1,3-dione (Compound No. 15). M.P. 151-154 C.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about (1H-1,2,4-Triazol-1-yl)methanol, hurry up and to see.

Reference:
Patent; Rohm and Haas Company; US6258751; (2001); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 74205-82-6, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 74205-82-6, name is (1H-1,2,4-Triazol-1-yl)methanol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example4. Synthesis of Intermediate 5Intermediate 4 (16.3g, 70.4 mmol) was completely dissolved in concentrated sulfuric acid (80ml) under ice bath, and triazolemethanol (10.4g) was added. The solution was stirred at room temperature for 5hrs. TLC was used toshow the completion of raw materials. Post-treatment: the reaction solution wasslowly added to 20% sodium hydroxide solution under ice bath. After alkalizing,dichloromethane was added to extract the product. The organic layer was driedand the solvent was removed by rotary evaporation. 21.2g yellow oil product(crude) was obtained. 15.6g light yellowsemi-solid (Intermediate 5) was obtained after column chromatography separation(dichloromethane: methanol 20: 1+ 1% triethylamine) and rotary evaporation,with a yield of 71.0%.

In the meantime we’ve collected together some recent articles in this area about 74205-82-6 to whet your appetite. Happy reading!

Reference:
Patent; Sichuan University; Wu, Yong; Hai, Li; Sun, Baohou; He, Yi; Li, Xiaocen; (11 pag.)CN103664900; (2016); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 74205-82-6, New Advances in Chemical Research in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world. 74205-82-6, name is (1H-1,2,4-Triazol-1-yl)methanol, molecular formula is C3H5N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

The indoline (1) (10.0 (^, 0.08311101) was added to a 11 round bottom flask, Glacial acetic acid 1001111, stirring at room temperature 0.5h, adding triazole methyl alcohol (16.61 g, 0.167 mol), and the reaction was stirred at 80 C for 3 h. TLC indicated that the reaction was complete and stopped The reaction was cooled to room temperature, 40% aqueous sodium hydroxide (100 ml) and 100 ml of methanol were added under ice-cooling, refluxed for 0.5 h at 70 C, Dichloromethane (75 mL x 3), saturated brine (150 ml x 2), dried over anhydrous sodium sulfate and concentrated to give Yellow oil 7.74 g (2), yield 46.6%

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 74205-82-6.

Reference:
Patent; Sichuan University; Wu, Yong; Guan, mei; Zhao, yinbo; Hai, Li; He, Yi; Li, Xiao Cen; (9 pag.)CN103664901; (2016); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 74205-82-6, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 74205-82-6, name is (1H-1,2,4-Triazol-1-yl)methanol, molecular formula is C3H5N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

This compound was prepared from the condensation of four equivalents of 1H-(1, 2, 4)-triazol-1-ylmethanol (10 mmol, 1 g) with one equivalent of ethane-1,2-diamine (?99,0 %, Fluka, 2,5 mmol, 0,15 g) in anhydrous acetonitrile (?99,8 %, Sigma-Aldrich) as the solvent. The mixture was stirred under reflux for 4 h. Then, the solution was dried over anhydrous MgSO4. After filtration, the solvent was removed under reduced pressure and the obtained residue was washed with a mixture of dichloromethane (99.8 %, Sigma-Aldrich) and diethyl ether (3/1 ratio) to give an oily product, which was recrystallized with ethanol to yield white crystals.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about (1H-1,2,4-Triazol-1-yl)methanol.

Reference:
Article; Zerrouki; Allouchi; Nicola; El Kadiri; Bahari; Colin; Rietveld; Structural Chemistry; vol. 27; 2; (2016); p. 697 – 704;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 74205-82-6, name is (1H-1,2,4-Triazol-1-yl)methanol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

General procedure: To a solution of indolines 6 (1.0 mmol) dissolved in acid (1.0 ml) in an icebath was added (1H-1,2,4-triazol-1-yl)methanol 5 (ammount as given in Table 1). Themixture was then stirred under the temperature and time given in Table 1. After completion of the reaction (TLC), the reaction mixture was poured intoice water, and 20% NaOH solution was added slowly to adjust the pH to 9. The product was extracted with dichloromethane. After removal of the solvent, theresidue was chromatographed over silica gel using dichloromethane-methanol togive 7 (yield as given in Table 1). The analytical and spectroscopic data for 7b and 7c are given below

If you are hungry for even more, make sure to check my other article about 74205-82-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; He, Yi; Li, Xiaolong; Li, Jue; Li, Xiaocen; Guo, Li; Hai, Li; Wu, Yong; Tetrahedron Letters; vol. 55; 29; (2014); p. 3938 – 3941;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 74205-82-6, name is (1H-1,2,4-Triazol-1-yl)methanol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of (1H-1,2,4-Triazol-1-yl)methanol

Step 2. Preparation of 1-(chloromethyl)-1H-1,2,4-triazole To a solution of (1H-1,2,4-triazol-1-yl)methanol (1.0 g, 10.09 mmol) in dichloroethane (20 ml) thionyl chloride (1.105 ml, 15.14 mmol) was added and the reaction mixture was stirred at 100 C. for 4 hours. The reaction mixture was cooled to 30 C., poured into H2O (25 mL) and extracted with dichloromethane (3*20 mL). The combined organic layers was washed with H2O (50 mL) & brine solution (50 mL), dried over Na2SO4 and evaporated in rotavapor under vacuum to yield 1-(chloromethyl)-1H-1,2,4-triazole (0.570 g, 48%) as brown liquid.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about (1H-1,2,4-Triazol-1-yl)methanol, in my other articles.

Reference:
Patent; CADILA HEALTHCARE LIMITED; DESAI, Ranjit C.; PINGALI, Harikishore; (40 pag.)US2016/83380; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 74205-82-6, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 74205-82-6, name is (1H-1,2,4-Triazol-1-yl)methanol, molecular formula is C3H5N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Step 2–Preparation of 1-(chloromethyl)-1,2,4-triazole hydrochloride A 4 neck 1 liter flask equipped with condenser, addition funnel and mechanical stirrer was charged 45 gms of 1-(hydroxymethyl)-1,2,4-triazole (0.464 mole) in 500 ml of THF was heating to 40 C. with vigorous stirring. Then SOCl2 (61 ml, 0.84 mole) was added dropwise maintaining the temperature at 45 C. During the addition, a precipitate formed and the mixture was stirred for an additional 2 hours. The product was filtered, washed three times with ethyl acetate and vacuum dried at room temperature. 67.3 gms of product having a melting point of 118-130 C. resulted (94.2% yield).

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about (1H-1,2,4-Triazol-1-yl)methanol, hurry up and to see.

Reference:
Patent; Rohm and Haas Company; US5087635; (1992); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 74205-82-6, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 74205-82-6, name is (1H-1,2,4-Triazol-1-yl)methanol, molecular formula is C3H5N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: To a solution of indolines 6 (1.0 mmol) dissolved in acid (1.0 ml) in an icebath was added (1H-1,2,4-triazol-1-yl)methanol 5 (ammount as given in Table 1). Themixture was then stirred under the temperature and time given in Table 1. After completion of the reaction (TLC), the reaction mixture was poured intoice water, and 20% NaOH solution was added slowly to adjust the pH to 9. The product was extracted with dichloromethane. After removal of the solvent, theresidue was chromatographed over silica gel using dichloromethane-methanol togive 7 (yield as given in Table 1). The analytical and spectroscopic data for 7b and 7c are given below

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 74205-82-6.

Reference:
Article; He, Yi; Li, Xiaolong; Li, Jue; Li, Xiaocen; Guo, Li; Hai, Li; Wu, Yong; Tetrahedron Letters; vol. 55; 29; (2014); p. 3938 – 3941;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics