Category: 956317-36-5

Application of 956317-36-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A round-bottom flask equipped with a magnetic stirrer bar was charged with 5-methyl-2-(2H-1,2,3-triazole-2-yl)benzoic acid (5.0 g, 24.6 mmol, 1.0 equiv) and THF (250 mL). Theresulting solution was cooled to 0 C, followed by successive addition of triethyl amine (3.58 mL, 25.8 mmol, 1.05 equiv) and isobutyl chloroformate (3.35 mL, 25.8 mmol,1.05 equiv). The reaction mixture was stirred at ambient temperature for 1 h. Subsequently, the precipitate was filtered off and the filtrate was concentrated under reduced pressure.The residue was taken up in ethyl acetate and washed with saturated NaHCO3 solution. The organic layer was washed with H20, dried over anhydrous sodium sulfate and concentrated under reduced pressure, yielding (isobutyl carbonic) 5-methyl-2-(2H-1,2,3- triazole-2-yl)benzoic anhydride (6.6 g, 88%) as an orange-brown oil.?H NMR (500 MHz, CDC13) oe = 7.80 (s, 2H), 7.70 (d, J = 8.20 Hz, 1H), 7.64 (d, J = 1.45Hz, 1H), 7.45 (dd, J = 1.45, 8.20 Hz, 1H), 3.98 (d, J = 6.60 Hz, 2H), 2.42 (s, 3H), 1.96(sept, J = 6.71 Hz, 1H), 0.91 (d, J = 6.75 Hz, 6H)?3C NMR (125 MHz, CDC13) oe = 161.0, 148.6, 139.0, 136.4, 135.9, 133.8, 131.2, 124.3, 124.1, 75.4, 27.6, 20.9, 18.7

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid.

Reference:
Patent; SANDOZ AG; HOeFERL-PRANTZ, Kathrin; BARTH, Roland; RICHTER, Frank; ZUPANCIC, Borut; (126 pag.)WO2016/20403; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 956317-36-5, New Advances in Chemical Research in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, molecular formula is C10H9N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a solution of compound 6 (2.40 g, 11.76 mmol), compound 5 (2.86 g, 14.11 mmol), 1-hydroxy-1H-benzotriazole (1.90 g, 14.11 mmol), and dry triethylamine (3.56 g, 35.28 mmol) in 18 mL of dry DMF was added EDC hydrochloride (2.70 g, 14.11 mmol), and the reaction was stirred 2 h at room temperature. The reaction was partitioned between EtOAc and saturated aqueous NaHCO3, the layers were separated and the organic was added to aqueous citric acid stirring for 1 h. Water was added and the mixture was partitioned. Combined the water layers and added saturated aqueous Na2CO3 to regulate pH > 9, then extracted with three portions of EtOAc. The organic layers were combined, dried over MgSO4 and concentrated by rotary evaporation to provide compound 7 as a white power 4.30 g in 93% yield. Mp: 108-109 C, [alpha]D25 -58.4 (c 1.01, MeOH). 1H NMR (600 MHz, DMSO-d6): delta 8.00-7.76 (m, 3H), 7.37-7.17 (m, 7H), 4.40-4.09 (m, 1H), 3.63-3.48 (m, 2H), 3.44-3.02 (m, 3H), 2.82-2.75 (m, 1H), 2.63-2.47 (m, 1H), 2.63-2.14 (m, 5H), 2.02- 1.63 (m, 2H), 1.17-0.99 (m, 3H); MS (ESI) m/z: 390.30 [M+H]+. HR-MS(ESI): m/z [M+H] calcd. for C23H27N5O: 390.2288; found: 390.2281.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid is helpful to your research.

Reference:
Article; Chen, Yin; Zhou, Yan; Li, Jun-Hong; Sun, Jia-Quan; Zhang, Gui-Sen; Chinese Chemical Letters; vol. 26; 1; (2015); p. 103 – 107;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, This compound has unique chemical properties. The synthetic route is as follows., category: Triazoles

Ar2-COOH (1.leq) and HBTU (1.1 eq) dissolved in dichloromethane (20m1/mmol) were stirred at 25C for 0.5-2hours, then intermediates 12-17 (leq.) and DIPEA (2 eq.) dissolved in dichloromethane were added. After 18 hours the mixture was poured in an aqueous saturated solution of NaHCO3 and extracted with dichloromethane. The crude was purified by silica gel column chromatography(DCM to DCM/MeOH = 9/1)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 956317-36-5.

Reference:
Patent; ROTTAPHARM S.P.A.; STASI, Luigi Piero; ROVATI, Lucio; ARTUSI, Roberto; BOVINO, Clara; COLACE, Fabrizio; MANDELLI, Stefano; WO2013/127913; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 956317-36-5, A common heterocyclic compound, 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, molecular formula is C10H9N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

HATU (0.090 g, 0.24 mmol) was added to a solution of 2-[3-(5-fluoropyridin-2-yl)-1,2-oxazol-5-yl]ethanamine (0.053 g, 0.16mmol), 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid (0.038 g,0.19 mmol) and DIPEA (0.082 mL, 0.47 mmol) in DMF (5 mL),followed by stirring at room temperature for 16 h. An aqueousNaHCO3 solution was added to the reaction solution, followedby extraction with EtOAc. The organic layer was washed with brine and was dried over MgSO4. The desiccant was then removedby filtration, and the solvent was distilled off under reduced pressure.The resulting residue was purified by column chromatography(20-80% EtOAc in hexanes) to give the title compound 20 asa colorless powder (0.060 g, 97%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Suzuki, Ryo; Nozawa, Dai; Futamura, Aya; Nishikawa-Shimono, Rie; Abe, Masahito; Hattori, Nobutaka; Ohta, Hiroshi; Araki, Yuko; Kambe, Daiji; Ohmichi, Mari; Tokura, Seiken; Aoki, Takeshi; Ohtake, Norikazu; Kawamoto, Hiroshi; Bioorganic and Medicinal Chemistry; vol. 23; 6; (2015); p. 1260 – 1275;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, A new synthetic method of this compound is introduced below., HPLC of Formula: C10H9N3O2

Oxalyl chloride (14.26 g, 118.1 mmol) was added over a period of 14 minutes to a stirred suspension of 5-Methyl-2-(2H-l,2,3-triazol-2-yl)benzoic Acid (20.0 g, 98.4 mmol) in CH2CI2 (132 mL) and DMF (2.0 mL) at 1 C. After complete addition the reaction mixture was stirred for 30 minutes at 5 C. An addition funnel was charged with a solution of 3- ((2-((iert.-butoxycarbonyl)amino)ethyl)amino)butanoate (24.4 g, 93.7 mmol) in CH2CI2 (340 mL) and NEt3 (19.0 g, 187.4 mmol). The amine solution was added over a period of 40 minutes to the stirred acid chloride solution at a rate to keep the internal temperature < 10 C. The reaction progress was monitored by HPLC and the reaction was judged complete after two hours. The reaction was quenched with H20 (250 mL) and the pH- value was adjusted to pH = 10.0 by the addition of NaOH (2.0 M). The organic layer was separated and washed with H20 (250 mL) at a pH = 2.0 adjusted with HC1 (2.0 M). The organic phase was concentrated under reduced pressure. The residue was taken up in toluene (100 mL) and concentrated under reduced pressure to give 49.6 g residue. The residue was taken up in cyclohexane (~ 250 mL) and stirred for two hours at room temperature. The solid was filtered, washed twice with cyclohexane (2 x 20 mL) and dried (40 C, < 5 mbar) to give the product (35.4 g, 84% yield) as a crystalline solid. 1H NMR (300 MHz, DMSO-D6): delta = 6.77 - 8.07 (series of overlapping m, 6H), 3.88 - 4.37 (series of overlapping m, 1H), 3.42 - 3.66 (three s, 3H), 2.56 - 3.35 (series of overlapping m, 6H), 2.39 (three s, 3H), 0.82 - 1.40 (series of overlapping m, 12H). The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future. Reference:
Patent; SANDOZ AG; BARTH, Roland; HOeFERL-PRANTZ, Kathrin; RICHTER, Frank; WIDSCHWENTER, Gerhard; (166 pag.)WO2016/20405; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 956317-36-5, These common heterocyclic compound, 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A round-bottom flask equipped with a magnetic stirrer bar was charged with 5-methyl-2-(2H-1,2,3-triazole-2-yl)benzoic acid (5.0 g, 24.6 mmol, 1.0 equiv) and THF (250 mL). Theresulting solution was cooled to 0 C, followed by successive addition of triethyl amine (3.58 mL, 25.8 mmol, 1.05 equiv) and isobutyl chloroformate (3.35 mL, 25.8 mmol,1.05 equiv). The reaction mixture was stirred at ambient temperature for 1 h. Subsequently, the precipitate was filtered off and the filtrate was concentrated under reduced pressure.The residue was taken up in ethyl acetate and washed with saturated NaHCO3 solution. The organic layer was washed with H20, dried over anhydrous sodium sulfate and concentrated under reduced pressure, yielding (isobutyl carbonic) 5-methyl-2-(2H-1,2,3- triazole-2-yl)benzoic anhydride (6.6 g, 88%) as an orange-brown oil.?H NMR (500 MHz, CDC13) oe = 7.80 (s, 2H), 7.70 (d, J = 8.20 Hz, 1H), 7.64 (d, J = 1.45Hz, 1H), 7.45 (dd, J = 1.45, 8.20 Hz, 1H), 3.98 (d, J = 6.60 Hz, 2H), 2.42 (s, 3H), 1.96(sept, J = 6.71 Hz, 1H), 0.91 (d, J = 6.75 Hz, 6H)?3C NMR (125 MHz, CDC13) oe = 161.0, 148.6, 139.0, 136.4, 135.9, 133.8, 131.2, 124.3, 124.1, 75.4, 27.6, 20.9, 18.7

Statistics shows that 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid is playing an increasingly important role. we look forward to future research findings about 956317-36-5.

Reference:
Patent; SANDOZ AG; HOeFERL-PRANTZ, Kathrin; BARTH, Roland; RICHTER, Frank; ZUPANCIC, Borut; (126 pag.)WO2016/20403; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, belongs to triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid

Diazepane intermediate I (75 mmol) was dissolved in N, N-dimethylformamide (75 ml) followed by reducing body Department of temperature to 0 ~ 5 , was added triazole intermediates II (79mmol),Hydroxybenzotriazole (82.8 mmol), EDCI (82.8 mmol) and triethylamine (188 mmol) were added and the mixture was warmed naturally and stirred at room temperature overnight. Adding 10% citric acid solution, extracting with ethyl acetate, washing the organic layer with 5% sodium carbonate solution, washing with saturated saline solution, drying with anhydrous sodium sulfate, filtering and concentrating to obtain 32.8g of suvresol, yield 97%, Purity: 98.1%; the resulting product was further treated with isopropyl acetate and n-propyl acetate Recrystallization from heptane gave 31.8 g of a white solid in 94% yield

The synthetic route of 956317-36-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Shanghai Aobo Bio-pharmaceutical Co., Ltd.; Guo Xiaowen; Lin Jianping; Gao Xiaofei; Huang Chao; Guo Yuanbin; Huang Luning; Tao Anping; Gu Hong; (6 pag.)CN106916149; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 956317-36-5, The chemical industry reduces the impact on the environment during synthesis 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, I believe this compound will play a more active role in future production and life.

EXAMPLE B5-Fluoro-2-{r(3R,6R)-l-(2-iodo-5-methylben2oyl)-6-methylpiperidin-3-yllmethoxy}pyridine (B- To a solution of A?7 (325 mg, 1.5 mmol) in CH2CI2 (50 ml) at 0C was added diisopropylethylamine (506 mL, 2.9 mmol) followed by C-I (447 mg, 1.6 mmol, generated from A-8 by treatment with SOCI2 and catalytic DMF in CH2CI2). After warming to room temperature and stirring for 2 h, the reaction was partitioned between CH2CI2 and saturated aqueous NaHC03. The layers were separated, the aqueous was extracted again with CH2CI2, the combined organics were washed with water, dried over Na2SO4, filtered and concentrated. The crude material was purified by gradient elution on silica gel (0 to 100% EtOAc in Hex) to yield 530 mg of B1^aS a white solid. Data for B1^: LRMS m/z (M+H): 469.1.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MERCK & CO., INC.; WO2008/147518; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 956317-36-5, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 956317-36-5 as follows.

A round-bottom flask equipped with a magnetic stirrer bar was charged with CH2C12(70 mL) and 5-methyl-2-(2H-1,2,3-triazole-2-yl)benzoic acid (2.Og, 9.4 mmol, 1 equiv).To the clear solution, pentafluoro phenol (1.72 g, 9.4 mmol, 1 equiv) and EDChydrochloride (1.79 g, 9.4 mmol, 1 equiv) were successively added. After addition ofDMAP (0.23 g, 1.9 mmol, 0.2 equiv), the clear solution was stirred at room temperature for 2 h. The reaction mixture was evaporated to dryness under reduced pressure and purified by column chromatography (Si02, cyclohexane/ethyl acetate 9: 1), yielding perfluorophenyl 5-methyl-2-(2H-1,2,3-triazole-2-yl)benzoate (2.5 g, 72 %) as a colorlesspowder.?H NMR (500 MHz, CDC13) oe = 7.83 (s, 2H), 7.78 (d, J = 8.20 Hz, 1H), 7.76 (d, J = 1.40, 1H), 7.54 (dd, J = 1.40, 8.25 Hz, 1H), 2.51 (s, 3H)?3C NMR (125 MHz, CDC13) oe = 162.8, 139.2, 136.6, 136.1, 134.0, 131.1, 124.6, 123.6, 21.1 (CM omitted due to low intensity)?9F NMR (470 MHz, CDC13) oe = -151.2 (m), -157.8 (t, J = 21.7 Hz), -162.3 (m)

According to the analysis of related databases, 956317-36-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SANDOZ AG; HOeFERL-PRANTZ, Kathrin; BARTH, Roland; RICHTER, Frank; ZUPANCIC, Borut; (126 pag.)WO2016/20403; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 956317-36-5, The chemical industry reduces the impact on the environment during synthesis 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, I believe this compound will play a more active role in future production and life.

General procedure: 1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride(WSCHCl) (37.4 g, 0.20 mol) was added to a solution of Nethyl-2[3-(5-fluoro-pyridin-2-yl)-1H-pyrazol-1-yl] ethanaminedihydrochloride (50 g, 0.16 mol), 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid (33.9 g, 0.18 mol), 1-hydroxy-1H-benzotriazolehydrate (HOBtH2O) (26.4 g, 0.20 mol) and triethylamine (TEA)(39.5 g, 0.39 mol) in THF (500 mL) at 0 C, followed by stirring atroom temperature for 20.5 h. The solvent of the reaction solutionwas distilled off under reduced pressure. An aqueous NaHCO3 solutionand EtOAc were added to the resulting residue, followed byextraction with EtOAc. The organic layer was washed with water,and the solvent was distilled off under reduced pressure to yieldthe crude product (72 g). An additional 196.7 g of the crude productwas synthesized using the same method from N-ethyl-2[3-(5-fluoro-pyridin-2-yl)-1H-pyrazol-1-yl] ethanamine dihydrochloride(140 g, 0.46 mol) and 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoicacid (94.8 g, 0.50 mol). The obtained crude product (268.7 g) wasrecrystallized with heptane and EtOAc. The deposited solid wasthen collected by filtration. The obtained solid was dried by heatingunder reduced pressure to yield the title compound 27e as acolorless powder (217.3 g).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Suzuki, Ryo; Nozawa, Dai; Futamura, Aya; Nishikawa-Shimono, Rie; Abe, Masahito; Hattori, Nobutaka; Ohta, Hiroshi; Araki, Yuko; Kambe, Daiji; Ohmichi, Mari; Tokura, Seiken; Aoki, Takeshi; Ohtake, Norikazu; Kawamoto, Hiroshi; Bioorganic and Medicinal Chemistry; vol. 23; 6; (2015); p. 1260 – 1275;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics