Category: 956317-36-5

Related Products of 956317-36-5, A common heterocyclic compound, 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, molecular formula is C10H9N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

5-methyl-2-(2H-1 ,2,3-triazol-2-yl)benzoic acid (1eq; prepared according to WO 2008147518), HOBT (1 eq) and EDCI.HCI (1.5eq) dissolved in dichloromethane (5ml/mmol) were stirred at 25 C for 0.5-2hours, then intermediate 2 (1 eq) dissolved in dichloromethane was added. After 18 hours the mixture was poured in an aqueous saturated solution of NaHCO3 and extracted with dichloromethane. The crude was purified by silica gel column chromatography (DCM to DCM/MeOH = 9/1) to obtain the title compound with yield of 52%.1HNMR (CDCI3) delta ppm 8.22-8.38 (m, 1H), 7.94-8.14 (m, 1H), 7.79-7.86 (m, 1H), 7.69 (m, 1H), 7.50-7.62 (m, 1H), 7.28-7.37(m, 1H), 7.0-7.24(m, 1H), 6.48-6.66 (m, 1H), 5.20(m, 1H), 4.34-4.84 (m, 1H), 3.89-4.0 (m, 1 H),3.65-3.75 (m, 1H), 3.21-3.44 (m, 2H), 3.01-3.11 (m, 1H), 2.26-2.46 (m, 3H), 1.89-2.17 (m, 1H), 1.02-1.28 (m, 1H), 0.19-0.63(m,4H)MS= ESI + m/z 439 [M+H]+

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ROTTAPHARM S.P.A.; STASI, Luigi Piero; ROVATI, Lucio; WO2012/104338; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, A new synthetic method of this compound is introduced below., category: Triazoles

The reaction flask was sequentially charged with 5-methyl-2- (2H- 1,2,3-triazol-2-yl) benzoic acid (4.65 g, 22.89 mmol)N, N-dimethylformamide (3 drops), dichloromethane (52 mL), thionyl chloride (2.79 mL, 34.33 mmol)The system was stirred at room temperature for 2 hours. Then, the reaction system was concentrated under reduced pressure at 40 C,5.06 g of 5-methyl-2- (2H-1,2,3-triazol-2-yl) benzoyl chloride was obtained as a yellow oil.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; He Bifei; Liu Guangyuan; Fan Yuping; Wang Zhongqing; Luo Zhonghua; (10 pag.)CN107304204; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid

General procedure: A mixture of the primary amine, 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid 31 (0.33 g, 1.6 mmol), N,N-diisopropylethylamine(DIPEA, 2.5 mL, 14.7 mmol), and 1-[bis(dimethylamino)methylene]-1H-1,2,3-triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(HATU, 0.91 g, 2.4 mmol) in DMF (3.2 mL) was stirredat room temperature for 17 h. The reaction was quenched by theaddition of water, and the mixture was extracted with EtOAc.The organic layer was washed with brine, dried over Na2SO4, filtered,and concentrated under reduced pressure. The resulting residuewas purified by preparative HPLC to obtain the title compound7a as a colorless solid (0.18 g, 28% over 2 steps).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 956317-36-5.

Reference:
Article; Futamura, Aya; Nozawa, Dai; Araki, Yuko; Tamura, Yunoshin; Tokura, Seiken; Kawamoto, Hiroshi; Tokumaru, Yuichi; Kakihara, Sora; Aoki, Takeshi; Ohtake, Norikazu; Bioorganic and Medicinal Chemistry; vol. 25; 20; (2017); p. 5203 – 5215;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, A new synthetic method of this compound is introduced below., category: Triazoles

5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid (11.94 gm, 0.058 moles) and DCM (15 ml) were charged in round bottom flask at room temperature. The reaction mixture was cooled to 0-5 C. and oxalyl chloride (5.07 mL, 0.058 moles) was added under inert atmosphere followed by the addition of DMF (1.18 mL, 0.0152 moles). The temperature of reaction mixture was raised to RT and stirred for 2 h. (R)-1-benzyl-5-methyl-1,4-diazepane (12 g, 0.058 moles, formula VII. DBT salt was neutralized with NaOH to obtain free base), triethyl amine (16.57 mL, 0.1176 moles) and DCM (500 mL) were taken in another RBF at 0-5 C. and stirred at room temperature for 2 h. The resulting mixture was slowly added to mixture containing triazole at 0-5 C. and stirred. The progress of the reaction was monitored by TLC. After completion of the reaction, the reaction mixture was diluted with water and extracted with DCM (2*7.5 mL). The combined organic layer was dried over Na2SO4 and concentrated under reduced pressure to give crude material. The obtained crude material was purified by column chromatography using silica gel (60-120 mesh), 2% MeOH-DCM as an eluent to give (R)-(4-benzyl-7-methyl-1,4-diazepan-1-yl)(5-methyl-2-(2H-1,2,3-triazol-2-yl)phenyl)methanone (Formula IX, 18 g) as a brown color liquid. The obtained crude compound was used for the next step without any further purification.

The synthetic route of 956317-36-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DR. REDDY’S LABORATORIES LIMTED; IQBAL, Javed; DAHANUKAR, Vilas Hareshwar; ORUGANTI, Srinivas; KANDAGATLA, Bhaskar; (23 pag.)US2016/168138; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 956317-36-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 956317-36-5 name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

The amine DBT salt 16 (5,67 kg, 9.09 mol) was charged to a vessel and inerted. DCM (28 L) was added, followed by 4 N Sodium Hydroxide solution (prepared from 10 N NaOH [22,4 L] and water [36 L]), The slurry was then stirred at ambient temperature for 1 h until a solution was obtained. The layers were separated and the aqueous phase treated with sodium chloride solution (10.1 kg in 20 L water). DCM (5 L) was then added and the bi-phasic mixture stirred for 10 min before separating the layers. The combined organic layers were then concentrated under reduced pressure to a 10 L volume. The solution of the free amine was used directly in the next reaction. The triazole acid 5 (13.25 kg, 65.2 mol), DCM (88 L) and DMF (1.35 L, 17.4 mol) were charged to a vessel and the resulting suspension was cooled to 0 C. Oxalyl chloride (8.28 kg, 65,2 mol) was added portion wise keeping the internal temperature between 5 and 10 C (the anhydride formed above 10 C), then the reaction was aged for 30 min at thistemperature. HPLC analysis showed acid 5 remained; an additional charge of oxalyl chloride (160 g, 1.26 mol) was made, and the solution stirred at 5 C for 30 minutes. A solution of the amine (R)-ll (16.5 kg, 62.1 mol) and triethylamine (13.19 kg, 130.0 mol) in DCM (~8 L) was added to the acid chloride over 30 minutes, keeping the internal temperature less than 15 C, The resulting slurry was aged for 30 minutes and then quenched by the addition of water (167 L) over 10 minutes, keeping the internal temperature <15 C. The lower organic layer was removed, and then concentrated under atmospheric pressure to a volume of 100 L. Assay at this stage showed 27.3 kg 1, 98%. The solution was solvent switched to MeCN (ca. 560 L, 20 mL/g) by distillation under reduced pressure at <50 C. The MeCN solution was treated with ecosorb C-941 (2.8 kg) slurried in MeCN (10 L). The resulting slurry was aged for 30 min then filtered through a Solka Flok pad and a 0.1 um cartridge filter washing with MeCN (2 x 30 L). The MeCN filtrate was concentrated under reduced pressure at <50 C to a final volume of ca 112 L. The slurry was cooled to 25 C and water (280 L) added over 40 minutes. The resulting slurry was aged at 20 C for 1 hour, then filtered, washing the cake with 5:1 water: MeCN (60 L) followed by water (40 L). The solid was dried in the vacuum oven with nitrogen purge overnight at 50 C. The final target 1 was isolated as a white solid, 26.72 kg, 95%, 98.5% ee, 99.6 LCAP. m.p. 153.1 C.[Patent; MERCK SHARP & DOHME CORP.; MERCK SHARP & DOHME LIMITED; BAXTER, Carl, A.; CLEATOR, Edward; KRSKA, Shane, W.; SHEEN, Faye; STEWART, Gavin; STROTMAN, Neil; WALLACE, Debra, J.; WRIGHT, Timothy; WO2012/148553; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 956317-36-5, These common heterocyclic compound, 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of the primary amine, 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid 31 (0.33 g, 1.6 mmol), N,N-diisopropylethylamine(DIPEA, 2.5 mL, 14.7 mmol), and 1-[bis(dimethylamino)methylene]-1H-1,2,3-triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(HATU, 0.91 g, 2.4 mmol) in DMF (3.2 mL) was stirredat room temperature for 17 h. The reaction was quenched by theaddition of water, and the mixture was extracted with EtOAc.The organic layer was washed with brine, dried over Na2SO4, filtered,and concentrated under reduced pressure. The resulting residuewas purified by preparative HPLC to obtain the title compound7a as a colorless solid (0.18 g, 28% over 2 steps).

Statistics shows that 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid is playing an increasingly important role. we look forward to future research findings about 956317-36-5.

Reference:
Article; Futamura, Aya; Nozawa, Dai; Araki, Yuko; Tamura, Yunoshin; Tokura, Seiken; Kawamoto, Hiroshi; Tokumaru, Yuichi; Kakihara, Sora; Aoki, Takeshi; Ohtake, Norikazu; Bioorganic and Medicinal Chemistry; vol. 25; 20; (2017); p. 5203 – 5215;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, This compound has unique chemical properties. The synthetic route is as follows., category: Triazoles

5-Methyl-2- (2H-1,2,3-triazol-2-yl) benzoic acid (2.03 g, 10 mmol) was added to a 100 mL single neck round bottom flask,Dissolved with anhydrous dichloromethane (20 mL)Thionyl chloride (15 mL, 200 mmol) and pyridine (0.15 mL, 2 mmol) were then added slowly,Gradually warmed to reflux for 3 hours.The reaction was stopped, cooled and the solvent was slowly evaporated under reduced pressure. The resulting product was used directly in the next step.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 956317-36-5.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jin Chuanfei; Xu Juan; Zhong Wenhe; Zhang Yingjun; Liu Qi; (35 pag.)CN105949203; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 956317-36-5,Some common heterocyclic compound, 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, molecular formula is C10H9N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Oxalyl chloride (14.26 g, 118.1 mmol) was added over a period of 14 minutes to a stirred suspension of 5-methyl-2-(2H-l,2,3-triazol-2-yl)benzoic Acid (20.0 g, 98.4 mmol) in CH2CI2(132 mL) and DMF (2.0 mL) at 1 C. After complete addition the reaction mixture was stirred for 30 minutes at 5 C. An addition funnel was charged with a solution of 3-((2- ((tert-butoxycarbonyl)amino)ethyl)amino)butanoate (24.4 g, 93.7 mmol) in CH2CI2(340 mL) and NEt3(19.0 g, 187.4 mmol). The amine solution was added over a period of 40 minutes to the stirred acid chloride solution at a rate to keep the internal temperature < 10 C. The reaction progress was monitored by HPLC and the reaction was judged complete after two hours. The reaction was quenched with H20 (250 mL) and the pH- value was adjusted to pH = 10.0 by the addition of NaOH (2.0 M).The organic layer was separated and washed with H20 (250 mL) at a pH = 2.0 adjusted with HC1 (2.0 M). The organic phase was concentrated under reduced pressure. The residue was taken up in toluene (100 mL) and concentrated under reduced pressure to give 49.6 g residue. The residue was taken up in cyclohexane (~ 250 mL) and stirred for two hours at room temperature. The solid was filtered, washed twice with cyclohexane (2 x 20 mL) and dried (40 C, 1H NMR (300 MHz, DMSO-D6): delta = 6.77 - 8.07 (series of overlapping m, 6H), 3.88 - 4.37 (series of overlapping m, 1H), 3.42 - 3.66 (three s, 3H), 2.56 - 3.35 (series of overlapping m, 6H), 2.39 (three s, 3H), 0.82 - 1.40 (series of overlapping m, 12H). The synthetic route of 956317-36-5 has been constantly updated, and we look forward to future research findings. Reference:
Patent; SANDOZ AG; BARTH, Roland; KAUFMANN, Marius; (97 pag.)WO2016/20404; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 956317-36-5, 956317-36-5

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol~2-yl)-5-methylbenzoic acid, followed by the undesired regioisomer isomer, I -(2H- 1 ,2,3-triazoI-2-yl)-5-methylbenzoic acid. A solution of the acid (3.56 g, 17.52 mmol) in 150 mL of DCM was stirred and cooled to O0C. The solution was treated with oxalyl chloride (1.9 mL, 21.9 mmol) and DMF (68 muL, .878 mmol). The solution was slowly warmed to room temperature and stirred overnight. Solvent was concentrated and the resulting solid was azetroped with DCM and concentrated to provide A-7 as a yellow solid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MERCK SHARP &amp; DOHME CORP.; BRESLIN, Michael, J.; COLEMAN, Paul, J.; COX, Christopher, D.; SCHREIER, John, D.; WHITMAN, David, B.; WO2010/48010; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

956317-36-5, The chemical industry reduces the impact on the environment during synthesis 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, I believe this compound will play a more active role in future production and life.

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid A-2, followed by the undesired regioisomer isomer, l-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid. A solution of the acid (3.56 g, 17.52 mmol) in 150 mL of DCM was stirred and cooled to 00C. The solution was treated with oxalyl chloride (1.9 mL, 21.9 mmol) and DMF (68 muL, .878 mmol). The solution was slowly warmed to room temperature and stirred overnight. Solvent was concentrated and the resulting solid was azetroped with DCM and concentrated to provide A-4 as a yellow solid.

The chemical industry reduces the impact on the environment during synthesis 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid. I believe this compound will play a more active role in future production and life.

Reference:
Patent; MERCK SHARP &amp; DOHME CORP.; COX, Christopher, D.; FLORES, Broc; SCHREIER, John, D.; WO2010/48016; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics