New downstream synthetic route of 1533519-84-4

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 1533519-84-4

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 1533519-84-4, name is 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C15H13N3S

[0254] Charge dimethylformamide (2.63 kg ± 5% <> 2.8 L ± 5%) to a reactor. Heat the dimethylformamide to a temperature between 27C and 35C. Charge Compound 5 (1.0 kg ± 1%) to the same reactor in portions whilst maintaining the temperature between 27C and 35C. Add methyl bromoacetate (0.6008 / M x 100 kg ± 1% <> 0.3620 / M x 100 L ± 1%) to the reaction mixture whilst maintaining the temperature between 27C and 35C, e.g., between 28C and 33C, where M is the purity of the methyl bromoacetate by GC in % area. The methyl bromoacetate addition is slightly exothermic. [0255] Stir the mixture for at least 10 minutes and not more than 20 minutes, at a temperature between 27C and 35C, e.g., between 28C and 33C. [0256] Add to the reaction mixture sodium bicarbonate (0.314 kg ± 1%) in portions whilst maintaining the temperature between 27C and 35C, over a period of at least 30 minutes and not more than 70 minutes. During the portion additions of sodium bicarbonate gaseous carbon dioxide is released. [0257] Stir the mixture for at least 1 hour and not more than 4 hours, at a temperature between 27C and 35C, e.g., between 28C and 33C. Cool the reaction mixture to a temperature between 5C and 10C, and then sample for HPLC analysis. [0258] The reaction is considered complete if the content of Compound 5 is below 0.50% area by HPLC, preferentially below 0.20% area by HPLC. If reaction completion is not achieved after the second sample, heat the reaction mixture to a temperature between 27C and 35C. Add methyl bromoacetate (0.0172 / M x 100 kg ± 1% <> 0.0103 / M x 100 L ± 1%) to the reaction mixture whilst maintaining the temperature between 27C and 35C, e.g., between 28C and 33C. Stir the mixture for at least 30 minutes and not more than 2 hours, at a temperature between 27C and 35C, e.g., between 28C and 33C, then sample for HPLC analysis. [0259] If reaction is complete, add to the reaction mixture over at least 15 minutes, while maintaining the temperature between 5C and 20C, ozonated deionised water (9.0 L ± 5%). During the addition the gaseous carbon dioxide can be released. The ozonated deionised water addition is slightly exothermic. Stir the mixture for at least 30 minutes while maintaining the temperature between 5C and 10C. [0260] Add to the mixture, over at least 10 minutes, while maintaining the temperature between 5C and 20C, a solution previously prepared by dissolution of sodium bicarbonate (0.105 kg ± 1%) in ozonated deionised water (1.47 L ± 5%), until a pH of the mixture between 6.7 and 8.0, e.g., between 6.9 and 7.3. Stir the suspension for at least 60 minutes while maintaining the temperature between 5C and 10C. Filter the suspension. Wash the wet cake with ozonated deionised water (2.0 L ± 5%) previously cooled to a temperature between 5C and 10C, twice. [0261] Wash the wet cake with a mixture of ethyl acetate (0.09 kg ± 5% <> 0.1 L ± 5%) and isopropyl alcohol (0.79 kg ± 5% <> 1.0 L ± 5%) previously cooled to a temperature between 0C and 5C, twice. [0262] Dry the wet cake under vacuum at a temperature below 45C, until the water content (by Karl Fischer analysis) is lower than, or equal to, 0.5% w/w, preferentially lower than, or equal to, 0.1%) w/w, the content of ethyl acetate by GC is lower than, or equal to, 200 ppm, the content of isopropyl alcohol by GC is lower than, or equal to, 600 ppm and the content of dimethylformamide by GC is lower than, or equal to, 10000 ppm.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 1533519-84-4

Reference:
Patent; ARDEA BIOSCIENCES, INC.; GUNIC, Esmir; GALVIN, Gabriel; WO2014/8295; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics