Triazoles

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, A new synthetic method of this compound is introduced below., 7411-23-6

A solution of 1.4 g (36 mmol) of sodium hydroxide in13 mL of water was added to a solution of 8.0 g (36 mmol) of 3,5-dibromo-1H-1,2,4-triazole (1) in100 mL of acetone. The two-phase system thus formed was stirred at 20 C until it became homogeneous, and 4.6 g (36 mmol) of dimethyl sulfate was added dropwise at such a rate that the temperature of the mixture did not exceed 40 C. The mixture was then refluxed for 2 h. The reaction was assumed to be complete when the mixture became weakly acidic and sodium methyl sulfate precipitated. The mixture was filtered,and the solvent was distilled off from the filtrate under reduced pressure. The residue was washed with water, and the precipitate was filtered off and recrystallized from hexane. Yield 7.8 g (88 %), mp 64-65 C [22]. IR spectrum, nu, cm-1: 2951, 1717, 1699, 1464, 1418,1391, 1354, 1275, 1250, 1115, 1016, 989, 712, 700. 1H NMR spectrum, delta, ppm: 3.87 s (3H, CH3). 13C NMR spectrum, deltaC, ppm: 37.4 (CH3), 131.3 (C3),139.1 (C5). Mass spectrum, m/z (Irel, %): 243 (51.1) [M]+, 241 (100) [M]+, 239 (48.9) [M]+, 229 (21.3), 227 (48.3), 225 (24.2), 218 (1.2), 200 (6.1), 198 (12.3), 196 (5.1), 162 (14.5), 160 (13.1), 136 (33.4), 134 (34.9), 122 (30.6), 120 (31.3), 119 (6.3), 117 (7.4), 108 (14.6), 107 (7.7), 106 (16.2), 105 (8.9), 93 (15.9), 91 (18.9), 81 (40.9), 79 (32.5), 52 (12.7), 43 (33.8), 41 (12.2), 40 (13.3), 39 (9.1), 38 (18.5), 29 (53.2), 28 (10.7), 27(16.3), 26 (8.2), 15 (60.3), 12 (7.4).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Tolstyakov; Russian Journal of Organic Chemistry; vol. 54; 10; (2018); p. 1537 – 1547; Zh. Org. Khim.; vol. 54; 10; (2018); p. 1525 – 1534,10;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7170-01-6, Adding some certain compound to certain chemical reactions, such as: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7170-01-6.

Intermediate 1075-(3-Methyl-[i ,2,4ltriazol-i -yl)-ryrazine-2-carboxylic acid: A mixture of methyl 5-chloropyrazine-2-carboxylate (0.75 g), K2003 (1 .8 g) and 3- methyl-i H-i ,2,4-triazole(i .2 g) in N,N-dimethylformamide (6 mL) is heated to 100C overnight. Analysis of the crude mixture by LCMS shows saponified product. The product is acidified with 1 N hydrochloric acid and the precipitate is filtered andwashed with water and diethyl ether to afford the title compound. LC (method 20): tR = 1 .21 mm; Mass spectrum (APCI): m/z = 206 [M+H]

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 7170-01-6.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; NEUROCRINE BIOSCIENCES, INC.; NOSSE, Bernd; ECKHARDT, Matthias; HIMMELSBACH, Frank; LANGKOPF, Elke; ASHWEEK, Neil J.; HARRIOTT, Nicole; WO2014/19967; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

3641-08-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 3641-08-5 name is 2H-1,2,4-Triazole-3-carboxamide, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

PREPARATION 20 o CF3SO3Si(CH2CH3)3 0^Nv Jl 2,6-lutdine ^Nv Jl f /T NH2 *- f /r VSi(CH2CH3)3HN-N HN-N H1 ,2-dichloroethane500C N-(triethylsilyl)-7H-l,2,4-triazole-3-carboxamideA stirred mixture of l//-l,2,4-triazole-3-carboxamide (500 mg, 4.46 mmol) in 1,2-dichloroethane (4.46 mL) treated at room temperature with 2,6-lutidine (2.08 mL, 17.84 mmol) and triethylsilyl trifluoromethanesulfonate (3.03 mL, 13.38 mmol) and heated under a nitrogen atmosphere at 5O0C. After 4 hours of heating the reaction solution allowed to cool to room temperature and diluted with dichloromethane (25 mL), washed with water (25 mL), 0.5M hydrochloric acid (25 mL), water (25 mL), dried over MgSO4, filtered, and evaporated to solid. The solid was flash chromatographed (silica gel, 10-65% ethyl acetate:hexane) to give the product as a white solid (683 mg).1H NMR (CDCl3, 500MHz, ppm) 0.89 (q, J=8Hz, 6H, CH2), 1.03 (t, j=8 Hz, 9H, CH3), 6.77 (s, IH, NH), 8.63 (s, IH, triazole H-5).LC/MS m/z (positive ion scan) M+l= 227.20

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2H-1,2,4-Triazole-3-carboxamide, and friends who are interested can also refer to it.

Reference:
Patent; MERCK SHARP & DOHME CORP.; GREENLEE, Mark, L.; WILKENING, Robert; APGAR, James; WILDONGER, Kenneth, James; MENG, Dongfang; PARKER, Dann, L.; WO2010/19203; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

1533519-85-5, A common compound: 1533519-85-5, name is Methyl 2-((4-(4-cyclopropylnaphthalen-1-yl)-4H-1,2,4-triazol-3-yl)thio)acetate, belongs to Triazoles compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

32 g of methyl 2-(4-(4-cyclopropyl-1-naphthyl)-4hydro-1,2,4-triazol-3-ylsulfanyl)acetate are placedIn a 10L flask, 600 mL of acetonitrile and 20 mL of pyridine were added, and the mixture was stirred and dissolved. After the solution was completely dissolved, the mixture was dropped at a rate of 10 mL/min.90mL of a 1mol/L Bromine Br2-acetonitrile solution was added dropwise at room temperature for 2 hours. After the reaction was complete, 2L of B was added to the reaction.Ethyl acetate was dissolved, washed twice with saturated brine, and washed with 1 L each time. The organic phase was collected and dried over saturated sodium sulfate.Concentrate and filter to obtain methyl 2-(5-bromo-4-(4-cyclopropyl-1-naphthyl)-4hydro-1,2,4triazol-3-ylsulfanyl)acetate.34.5 g, yield 87.3%; purity 98.2%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2-((4-(4-cyclopropylnaphthalen-1-yl)-4H-1,2,4-triazol-3-yl)thio)acetate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Chengdu Meiyugao Pharmaceutical Co., Ltd.; Wang Chunyan; Chen Zhiyong; Sui Yumin; (17 pag.)CN107955029; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

4928-88-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 4928-88-5 name is Methyl 1H-1,2,4-triazole-3-carboxylate, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

EXAMPLE 12 A mixture of methyl 1,2,4-triazole-3-carboxylate (1.27 g, 0.01 mole) and beta-D-ribofuranosyl-1,2,3,5-tetraacetate (3.18 g, 0.01 mole) was melted and then 0.048 g of methanesulfonic acid was added thereto. The reaction mixture was reacted for hours, while maintaining the temperature of the reaction mixture at 95+-5¡ã C. And then, the reaction mixture was crystallized with 300.8 nit of methanol to give 3.0 g of 1-(2,3,5-tri-O-acetyl-beta-D-ribofuranosyl)-1,2,4-triazole-3-carboxylic acid methyl ester (yield: 79percent).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Methyl 1H-1,2,4-triazole-3-carboxylate, and friends who are interested can also refer to it.

Reference:
Patent; Lee, Tai-Au; Park, Nam-Jin; Khoo, Ja-Heouk; Lee, Byung-Cheol; US2003/120064; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

103755-58-4, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol, A new synthetic method of this compound is introduced below.

General procedure: In a two neck flask of 50 mL under nitrogen atmosphere was added KOH (0.64 g, 5 mmol) and tosyl chloride (0.45 g, 2.2 mmol) dissolved in THF (8 mL). The suspension was cooled to 0 C and the required triazole (2 mmol) was added in one portion. The mixture was stirred for 2 h at room temperature. In the end of reaction the aqueous phase was washed with ethyl acetate, the organic phase obtained was dried with MgSO4, filtered and the solvent evaporated under vacuum. The crude product was purified by column chromatography using as eluent a mixture of hexane/ethyl acetate (7/3). (1-(3-Chlorophenyl)-1H-1,2,3-triazol-4-yl)methyl-4-methylbenzenesulfonate (4c): The product was obtained as a white solid in 90% yield:

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Stefani, Helio A.; Canduzini, Hugo A.; Manarin, Flavia; Tetrahedron Letters; vol. 52; 46; (2011); p. 6086 – 6090;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

107534-96-3, Adding some certain compound to certain chemical reactions, such as: 107534-96-3, name is 3-((1H-1,2,4-Triazol-1-yl)methyl)-1-(4-chlorophenyl)-4,4-dimethylpentan-3-ol, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 107534-96-3.

Complex cis-[PdCl2L2] (II) was prepared at 20and the predetermined ratio Pd(II) : L = 1 : 2. To an aqueous solution (1 mL) of cissodium dichloromalonatopalladate(II) dihydrate (0.063 g, 0.17 mmol), asolution (1 mL) of the reagent (0.102 g, 0.33 mmol) in chloroform was added under stirring. A yellow precipitate was formed for 3 h. On the next day, the precipitate was filtered out, washed with water and then hexane, and dried. The yield was 92%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 107534-96-3.

Reference:
Article; Khisamutdinov; Shitikova; Anpilogova; Golubyatnikova; Mulagaleev; Murinov; Russian Journal of Inorganic Chemistry; vol. 60; 5; (2015); p. 638 – 646; Zh. Neorg. Khim.; vol. 60; 5; (2015); p. 710 – 718,9;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 16681-70-2, 16681-70-2

Compound 2 (18 mg, 47 mumol) was dissolved in DMF (0.3 mL) and 1H-1,2,3-triazole-4-carboxylic acid (5.3 mg, 47 mumol). HATU (18 mg, 47 mumol) was added, followed by DIPEA (25 muL, 141 mumol). The mixture was stirred for 30 minutes then concentrated under reduced pressure to yield Compound 3, which was used without further purification.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-[1,2,3]Triazole-4-carboxylic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Fleury, Melissa; Hughes, Adam D.; US2014/45906; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-36-8, name is 1H-1,2,3-Triazole, A new synthetic method of this compound is introduced below.

a) (2-(2H-1.2.3-triazol-2-yl)phenyl)methanolTo a mixture of (2-iodophenyl)methanol (1 .50 g, 6.41 mmol), 1H-1,2,3-triazole (0.797 g, 11.54 mmol), frarts-N,N’-dimethylcyclohexane-1 ,2-diamine (0.091 g, 0.641 mmol) andCs2C03 (3.76 g, 11.54 mmol) in DMF (15 mL), Cul (0.61 g, 3.20 mmol) was added and the reaction mixture was stirred for 20 min at 120C and 15 min at 160C in the microwave. The reaction mixture was cooled to rt and filtered to remove the solids. The filtrate wasconcentrated under reduced pressure. The residue was purified by flash-columnchromatography over silicagel (eluent: gradient 10%- 100% ethyl acetate/heptane) to yield the title compound (1.46 g, 64%). [1H NMR (400 MHz, DMSO-d6) delta ppm 8.10 (s, 2 H), 7.74 (d, J=7.53 Hz, 1 H), 7.61 (dd, 8.03, 1.25 Hz, 1 H), 7.52 (td, J=7.53, 1.25 Hz, 1 H), 7.44 (m, 1 H), 5.26 (t, J=5.40 Hz, 1 H), 4.59 (d, J=5.02 Hz, 2 H); LCMS RtA = 0.68, [M+Hf = 176.1].

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; NOVARTIS AG; BADIGER, Sangamesh; BEHNKE, Dirk; BETSCHART, Claudia; COTESTA, Simona; HINTERMANN, Samuel; OFNER, Silvio; PANDIT, Chetan; ROY, Bernard Lucien; WO2012/55888; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-88-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 288-88-0, name is 1H-1,2,4-Triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

Intermediate 1 3,5-Dibromo-lH-l,2,4-triazole Solutions of bromine (6.1 mL, 119 mmol) in DCM (15 mL) and sodium hydroxide (6.78 g, 169 mmol) in water (20 mL) were simultaneously added dropwise to a stirred mixture of 1H-1,2,4- triazole (3.9 g, 56 mmol), water (50 mL) and DCM (15 mL) at 0C while keeping the reaction temperature below 20C. The mixture was stirred at ambient temperature over night. Hydrochloric acid (cone, 2.0 mL, 66 mmol) was added. The solid was isolated by filtration, washed with water and dried in vacuum to yield the title compound as a solid (8.3 g, 65%). MS (ESI ) m/z 224 [M-H]”.

The synthetic route of 288-88-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ACTURUM LIFE SCIENCE AB; BESIDSKI, Yevgeni; YNGVE, Ulrika; PAULSEN, Kim; LINDE, Christian; NORDVALL, Gunnar; MACSARI, Istvan; MALMBORG, Jonas; WO2014/195321; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics