Tag: M.W:200-300

956317-36-5, Adding some certain compound to certain chemical reactions, such as: 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 956317-36-5.

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1 ,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dirnethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to rt, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 50% EtOAc in water with 0.1% TFA) to give the desired A-3. A portion of this acid (0.1 1 g, 0.53 mmol) was treated with thionyl chloride (0.59 g, 5.3 mmol) in dichloromethane (5.0 mL) at rt. After stirring at RT for 1 h, the mixture was concentrated, azeotroping with benzene to yield acid chloride A-3.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 956317-36-5.

Reference:
Patent; MERCK & CO., INC.; WO2009/11775; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7411-23-6, A common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

NaH (60 % dispersion in mineral oil; 5.29 g, 132 mmol) was added to a stirred solution of 3,5-dibromotriazole (20.0 g, 88.2 mmol) in DMF under an atmosphere of N2 at r.t.. After 30 min, 2-iodopropane (10.6 ml, 106 mmol) was slowly added and the r.m. was heated at 40 C for 2-3 h. The content was carefully poured onto ice/H20 (1 1), and the mixture was extracted with DIPE. The combined organic extracts were washed with H20 (4 x 200 ml), then with brine and dried (Na2S04). Filtration and concentration under reduced pressure yielded a yellow oil. Yield: 16.50 g of intermediate 24 (70 %).

The synthetic route of 7411-23-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ORTHO-MCNEIL-JANSSEN PHARMACEUTICALS, INC; VAN BRANDT, Sven, Franciscus, Anna; DE CLEYN, Michel, Anna, Jozef; GIJSEN, Henricus, Jacobus, Maria; BERTHELOT, Didier, Jean-Claude; SURKYN, Michel; WO2011/86099; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

The chemical industry reduces the impact on the environment during synthesis 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, I believe this compound will play a more active role in future production and life. 956317-36-5

21.3g (105mmol) of 5-methyl -2- (2H-1,2,3- triazole -2-) benzoic acid was suspended in isopropyl acetate (230mL) was added 2.2mL of DMF, in a nitrogen atmosphere, was slowly added 15.3g oxalyl chloride, control the deflation rate, maintaining the reaction temperature at 20-25 , after the reaction became a clear solution, distilled under reduced pressure at not more than 30 , only to the remaining 100 ml of volume, then add 230 ml of isopropyl acetate, and then the solvent was evaporated to only 100 ml of this solution was added 450 ml of isopropyl acetate to give 5-methyl -2- (2H- 1,2,3-triazole -2-) benzoyl chloride solution.

The chemical industry reduces the impact on the environment during synthesis 956317-36-5. I believe this compound will play a more active role in future production and life.

Reference:
Patent; China Resources Double-Crane Pharmaceutical Co., Ltd.; Liu, kaixiang; Zhou, Yisui; Li, Kai; (20 pag.)CN105330657; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7411-23-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

In a 250 mL round bottomed flask, 3,5-dibromo-1H-1,2,4-triazole (Int-1, 2.00 g, 8.82 mmol) was dissolved in DMF (60 mL) and potassium carbonate (2.72 g, 19.5 mmol) was added. The resulting suspension was stirred for 20 min at room temperature. Then, 2,2-difluoroethyl trifluoromethanesulfonate (2.08 g, 1.29 mL, 9.7 mmol) was added and the reaction mixture was stirred for 6 h at room temperature. After that, it was concentrated in vacuo, the residue was diluted with MTBE (100 mL) and ice water (100 mL), the aqueous phase was extracted with MTBE (3 x 100 mL). The combined organic layers were washed with water (2 x 100 mL) and brine (1 x 100 mL), dried (sodium sulfate) and concentrated in vacuo. The resulting crude product, a white solid, was used in the next step without further purification (2.402 g, 94 %). HPLC (method LCMS_fastgradient) tR = 0.88 min. 1H NMR (CDCl3, 300 MHz): delta 4.52 (dt, J = 4.2, 12.6 Hz, 2 H), 6.16 (tt, J= 4.2, 54.8 Hz, 1 H). MS (ES+) m/z 289.9, 291.9, 293.9 [M+H, 2 Br isotopes] .

The synthetic route of 3,5-Dibromo-1H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; BERCHTOLD, Stefan; GALLEY, Guido; GOERGLER, Annick; JAKOB-ROETNE, Roland; KRUMMENACHER, Daniela; LIMBERG, Anja; NEIDHART, Werner; RATNI, Hasane; REUTLINGER, Michael; RODRIGUEZ SARMIENTO, Rosa Maria; SCHNIDER, Christian; (309 pag.)WO2018/87018; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common compound: 217448-86-7, name is Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate, belongs to Triazoles compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below. 217448-86-7

In a 250 ml round bottom flask, 2,6-difluorobenzylbromide (0.024 mol, 5 g), sodium azide (0.026 mol, 1.72 g) and water (50 ml) were added. The reaction mixture was heated to 700C to 750C for 30 hours and formation of the azide intermediate was monitored by thin layer chromatography (TLC). After the completion of reaction, the reaction contents were cooled to room temperature and then to this methyl propiolate (0.024 mol, 2.1 ml) was added dropwise, maintaining the contents at room temperature. On complete addition, the mixture was again heated at 600C to 650C for 4 to 5 hours. After the reaction was completed, the contents were cooled to room temperature and to this 25% aqueous ammonia (40 ml) solution was added dropwise. The reaction contents were heated to 700C to 750C for 4 to 5 hours and then gradually cooled to room temperature. The solid obtained was filtered and washed with water. The product was dried under vacuum at 700C – 750C to give 3.0 g of rufinamide.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 217448-86-7, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; CIPLA LIMITED; KANKAN, Rajendra, Narayanrao; RAO, Dharmaraj, Ramachandra; BIRARI, Dilip, Ramdas; CURTIS, Philip, Anthony; WO2010/43849; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, This compound has unique chemical properties. The synthetic route is as follows., 7411-23-6

In a 250 mL round bottomed flask sodium hydride (60% dispersion in mineral oil) (264 mg, 6.61 mmol) was added to a colorless solution of 3,5-dibromo-lH-l,2,4-triazole (lnt-1, 1 g, 4.41 mmol) in DMF (22 ml). The resulting suspension was stirred at room temp during 30 min and 1,1,1,3,3,3-hexadeuterio-2-bromopropane (683 mg, 5.29 mmol) was added and the reaction was stirred at 40C over night.The reaction mixture was poured into 50 mL H20 and extracted with EtOAc (3 x 50 mL). The organic layers were washed with sat NaCl (3 x 50 mL), dried over MgS04 and concentrated in vacuo. The title compound was isolated as a colourless liquid (644 mg, 2.34 mmol, 53.1 % yield). MS (ES+) m/z 275.9 [(M+H)+].

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; BERCHTOLD, Stefan; GALLEY, Guido; GOERGLER, Annick; JAKOB-ROETNE, Roland; KRUMMENACHER, Daniela; LIMBERG, Anja; NEIDHART, Werner; RATNI, Hasane; REUTLINGER, Michael; RODRIGUEZ SARMIENTO, Rosa Maria; SCHNIDER, Christian; (309 pag.)WO2018/87018; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7411-23-6, Name is 3,5-Dibromo-1H-1,2,4-triazole, 7411-23-6, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

A mixture of 3,5-dibromo-1H-1,2,4-triazole (700 mg, 3.1 mmol), 2,2′-bipyridyl (60 mg, 0.39 mmol), copper(II) acetate (140 mg, 0.77 mmol), potassium carbonate (852 mg, 6.2 mmol) and cyclopropylboronic acid (795 mg, 9.3 mmol) was dissolved in toluene (5 mL) and water (1.5mL) and stirred at 70 C for 18 h. The reaction mixture was cooled to RT, quenched with NH4Cl (sat. aq.) and the products extracted in DCM. The combined organic fractions were dried with a phase separator and reduced in vacuo. The crude mixture was dissolved in DCM and dry-loaded onto silica. Purification via silica column chromatography eluting with 10-60% EtOAc in Pet. Ether afforded 5-dibromo-1-cyclopropyl-1,2,4-triazole and 1-allyl-3,5-dibromo-1,2,4-triazole (123 mg, 0.46 mmol, 15% yield) as an inseparable mixture. UPLC-MS (ES+, Method A): 1.52 min, m/z 267.9 [M+H]+

Statistics shows that 3,5-Dibromo-1H-1,2,4-triazole is playing an increasingly important role. we look forward to future research findings about 7411-23-6.

Reference:
Patent; REDX PHARMA PLC; JONES, Clifford, D.; BUNYARD, Peter; PITT, Gary; BYRNE, Liam; PESNOT, Thomas; GUISOT, Nicolas, E.S.; (318 pag.)WO2019/145729; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. 7411-23-6

Intermediate 4 3,5-Dibromo-l-methyl-lH-l,2,4-triazole To a solution of 3,5-dibromo-lH-l,2,4-triazole (1.0 g, 4.41 mmol) in DMF (9 mL) sodium tert- pentoxide (0.485 g, 4.41 mmol) was added and the mixture was stirred for 10 min at rt under nitrogen atmosphere, lodomethane (0.29 mL, 4.63 mmol) was added and the mixture was stirred at 40C for 2 hours. The mixture was poured onto water and extracted twice with diisopropylether. The organic phase was washed with water (2x), brine and dried over sodium sulfate. The solvents were evaporated to give the title compound as a solid (0.83 g, 78%).

The synthetic route of 7411-23-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ACTURUM LIFE SCIENCE AB; BESIDSKI, Yevgeni; YNGVE, Ulrika; PAULSEN, Kim; LINDE, Christian; NORDVALL, Gunnar; MACSARI, Istvan; MALMBORG, Jonas; WO2014/195321; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7411-23-6, Name is 3,5-Dibromo-1H-1,2,4-triazole, 7411-23-6, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

EXAMPLE 1Preparation of 2-(3,5-dibromo-1H-1,2,4-triazol-1-yl)-1-(2,4-difluorophenyl)ethan-1-oneFirst, 43.7 g of 3,5-dibromo-1H-1,2,4-triazole is introduced into 200 mL of tetrahydrofuran (THF), the resultant mixture is agitated, and 40.4 g of 2-chloro-2,4-difluoroacetophenone is further introduced thereto. Next, 36.3 g of potassium carbonate is introduced to the reaction mixture and the resultant mixture is agitated for 7 hours at room temperature. After the completion of the reaction, the reaction mixture is filtered, washed with 100 mL of tetrahydrofuran (THF), and concentrated at room temperature. Then, 437 mL of purified water is introduced so that the crystals are slurried, followed by filtering. The filtered crystals are reslurried in 175 mL of isopropanol and filtered again. The crystals are washed with 44 mL of isopropanol and dried with hot air at 50 C. to obtain 63.8 g of the title compound as a white solid (yield 87%, purity 99.2%, HPLC, detected at a wavelength of 256 nm, 18C 4.6¡Á250 mm, mobile phase 60% ACN, flow rate 1 mL/min).1H-NMR (200 MHz, CDCl3) delta (ppm): 8.118.03(1H), 7.11-6.96(2H), 5.51(2H).

Statistics shows that 3,5-Dibromo-1H-1,2,4-triazole is playing an increasingly important role. we look forward to future research findings about 7411-23-6.

Reference:
Patent; Dongkook Pharmaceutical Co., Ltd.; US2013/5973; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 15294-81-2, name is 4,5-Dibromo-1H-1,2,3-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 15294-81-2, 15294-81-2

Example 160: Preparation of 4,5-dibromo-l-methyl-lH-[1.2.31triazole and 4,5-dibromo- 2-methyl-2H-r 1 ,231triazole(A) (B)To a solution of 4,5-dibromo- IH-[1, 2,3]triazole (2.26 g, 10 mmol) (Example 159) and triethyl amine (1.5 ml, 10 mmol) in dichloromethane (50 ml), was added methyl iodide (625 mul, 10 mmol). The reaction mixture was stirred at room temperature for 24 hours. More triethyl amine (0.75 ml, 5 mmol) and more methyl iodide (312 mul, 5 mmol) were added and the mixture was stirred for 3 hours. The reaction mixture was quenched with aqueous ammonium chloride (saturated, 15 ml). The organic extract was dried over magnesium sulfate and concentrated and the residue was purified by column chromatography on silica gel (eluent 10-30% ethyl acetate in hexane) to give 4,5-dibromo-2- methyl-2H-[l ,2,3]triazole (isomer B) (625 mg, 26% yield) and 4,5-dibromo- 1-methyl- IH-[1, 2,3]triazole (isomer A) (825 mg, 34% yield). Isomer A 1H-NMR (400 MHz, CDCl3): 4.09 (s, 3H, Me) ppm. Isomer B 1H-NMR (400 MHz, CDCl3): 4.18 (s, 3H, Me) ppm.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4,5-Dibromo-1H-1,2,3-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SYNGENTA LIMITED; WO2007/71900; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics