Tag: M.W:200-300

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 15294-81-2, name is 4,5-Dibromo-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 4,5-Dibromo-1H-1,2,3-triazole

A mixture of A-6.1 (2.00 g, 11.0 mmol), A-6.2 (3.88 g, 17.1 mmol), Cul (0.13 g, 0.68 mmol), A-6.3 (0.15 mL, 1.03 mmol) and K2003 (2.36 g, 17.1 mmol) in dry DMF (10 mL) isheated to 12000 by microwave for 40 mm. The mixture is poured into water and extracted with Et20. The aq. phase is acidified with HCI (4M aq. solution) and extracted with EA. The combined organic phases are dried and concentrated to give the crude product which is purified by flash column chromatography on silica gel (using a solvent gradient from 100percent EA to EAIMeOH = 9/1) to provide 3.6 g of A-6.4. APCI+/-: 365 [M+H] HPLC (Rt): 1.10 mm (methodG).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 4,5-Dibromo-1H-1,2,3-triazole, in my other articles.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; RIETHER, Doris; FERRARA, Marco; HEINE, Niklas; LESSEL, Uta, Friederike; LIPINSKI, Radoslaw; SCHEUERER, Stefan; (50 pag.)WO2019/25275; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 3,5-Dibromo-1H-1,2,4-triazole

Step B: Preparation of 3,5-dibromo-1H-1,2,4-triazole-1-acetic acid A solution of 3,5-dibromo-1H-1,2,4-triazole (i.e. the product of Example 15, Step A) (4.54 g, 20.0 mmol) in acetonitrile (20 mL) was treated with potassium carbonate (5.0 g) and ethyl bromoacetate (4.52 g, 27.0 mmol). The reaction mixture was heated at reflux for 4 h and then cooled to room temperature. The reaction mixture was diluted with ethyl acetate (150 mL), filtered, washed with water, 1 N hydrochloric acid and saturated aqueous sodium bicarbonate, and dried (MgSO4). The resulting mixture was filtered and concentrated under reduced pressure to give 6.19 g of ester compound as a pale yellow oil. The ester compound in tetrahydrofuran (40 mL) was treated with 2 N aqueous sodium hydroxide (20 mL) and stirred at room temperature for 3 h. The reaction mixture was cooled in an ice bath and acidified with 6 N hydrochloric acid (10 mL). The resulting mixture was extracted with ether (200 mL), and the separated organic layer was washed with saturated aqueous sodium chloride, dried (MgSO4), filtered and concentrated to give 6.38 g of the title compound as a pale yellow oil. The crude product was triturated with hot n-butyl chloride (100 mL). The mixture was cooled to room temperature and filtered to give 3.77 g of the title compound as a white solid melting at 147-152 C. 1H NMR (CDCl3): delta 5.00 (s, 2H).

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 7411-23-6

Reference:
Patent; Gregory, Vann; Pasteris, Robert James; US2010/240619; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world.956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol~2-yl)-5-methylbenzoic acid, followed by the undesired regioisomer isomer, I -(2H- 1 ,2,3-triazoI-2-yl)-5-methylbenzoic acid. A solution of the acid (3.56 g, 17.52 mmol) in 150 mL of DCM was stirred and cooled to O0C. The solution was treated with oxalyl chloride (1.9 mL, 21.9 mmol) and DMF (68 muL, .878 mmol). The solution was slowly warmed to room temperature and stirred overnight. Solvent was concentrated and the resulting solid was azetroped with DCM and concentrated to provide A-7 as a yellow solid.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid ,and how the biochemistry of the body works.

Reference:
Patent; MERCK SHARP & DOHME CORP.; BRESLIN, Michael, J.; COLEMAN, Paul, J.; COX, Christopher, D.; SCHREIER, John, D.; WHITMAN, David, B.; WO2010/48010; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 1533519-84-4, name is 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 1533519-84-4

Compound 10 was synthesized with reference to Patent CN10352440A reported. Compound 10 (50. 00mg,187 · 02umol, 1 · OOeq), compound 14 (54. 56mg, 224. 42umol, 1 · 20eq) and potassium carbonate (31. 02mg,224. 42umol, 1.20eq) were dissolved in N, Nu- dimethylformamide (10. OOmL), and the reaction was stirred between 15 C under 2.5 hours. After completion of the reaction, the reaction solution was spin-dried to give the crude product as a yellow solid. The crude product is purified by PTLC thin layer chromatography (developingSolvent: 50% ethyl acetate / petroleum ether) to give compound 15 as a colorless oil.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 1533519-84-4.

Reference:
Patent; Nanjing Matilda drug R & D Co., Ltd.; Wang, Jainfei; Zhang, Jing; Zhang, Long; Zhang, Yang; Li, Jian; Chen, Shuhui; (43 pag.)CN105622531; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 138624-97-2, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 138624-97-2, name is 1-Benzyl-1H-1,2,4-triazole-3-carboxylic acid, molecular formula is C10H9N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A mixture of (3R)-3-amino- 1, 8-dimethyl-4,5-dihydro-3H-pyrido [3,4-b] azepine-2,7-dione (15 mg, 0.07 mmol), 1-hydroxybenzotriazole (11 mg, 0.08 mmol), 1-(3-dimethylaminopropyl)-3-ethylcarbodiimidehydrochloride (16 mg, 0.08 mmol) and 1 -benzyl1,2,4-triazole-3-carboxylic acid (17 mg, 0.08 mmol) in N,N-dimethylformamide (3 mL) was stirred at 25 C for 2 h. The mixture was concentrated under reduced pressure and the residue was purified by RP-HPLC (acetonitrile 20-50% / 0.05% ammonium hydroxide in water)afford arbitrarily assigned (R)- 1 -benzyl-N-( 1, 8-dimethyl-2,7-dioxo-2,3 ,4,5 ,7 ,8-hexahydro-1 H-pyrido [3,4-b] azepin-3-yl)- 1 H-i ,2,4-triazole-3-carboxamide (21.2 mg, 76%) as a white solid. ?H NMR (400 MHz, CD3OD) 8.56 (s, 1H), 7.87 (s, 1H), 7.37 – 7.33 (m, 5H), 6.49 (s, 1H), 5.47 (s, 2H), 4.71 – 4.65 (m, 1H), 3.59 (s, 3H), 3.33 (s, 3H), 2.74 – 2.69 (m, 2H), 2.45 – 2.38 (m, 1H), 2.13 – 2.08 (m, 1H). LCMS RT = 0.702mi m/z = 407.1 [M + H]. LCMS (5 to 95% acetonitrile in water + 0.1% formic acid over1.5 mins) retention time 0.702 mi ESI+ found [M+H] = 407.1.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1-Benzyl-1H-1,2,4-triazole-3-carboxylic acid, hurry up and to see.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; PATEL, Snahel; (105 pag.)WO2018/73193; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 7411-23-6, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

a. A solution of 1.72 g (43 mmol) of sodium hydroxide in 2 mL of water was added with stirring to a solution of 10.0 g (43 mmol) of triazole 1 in 100 mL of DMF, and 6.49 g (43 mmol) of isopentyl bromide was then added. The mixture was stirred for 13 h on a boiling water bath, cooled, and poured into 1 L of water. The yellow oily material was separated using a separatory funnel (bottom layer), additionally washed with water, and dried for 3 days in a vacuum desiccator over phosphoric anhydride. The product was used in further syntheses without additional purification. Yield 11.5 g (89 %).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 3,5-Dibromo-1H-1,2,4-triazole.

Reference:
Article; Tolstyakov; Russian Journal of Organic Chemistry; vol. 54; 10; (2018); p. 1537 – 1547; Zh. Org. Khim.; vol. 54; 10; (2018); p. 1525 – 1534,10;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 7411-23-6, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

In a 250 mL round bottomed flask, 3,5-dibromo-1H-1,2,4-triazole (Int-1, 2.00 g, 8.82 mmol) was dissolved in DMF (60 mL) and potassium carbonate (2.72 g, 19.5 mmol) was added. After stirring for 20 min at room temperature, 2,2,2-trifluoroethyl trifluoromethanesulfonate (2.32 g, 1.36 mL, 9.70 mmol) was added and the reaction mixture was stirred for 20 h at roomtemperature. After that, it was concentrated in vacuo, combined with ice- water (200 mL) and extracted with MTBE (3 x 200 mL). The combined organic layers were washed with water (2 x 200 mL) and brine (200 mL), dried (sodium sulfate) and concentrated in vacuo to yield the title compound as yellow liquid (2.71 g, 99%) which was used in the next step without further purification. 1H NMR (DMSO-d6, 300 MHz): 5.31 (q, J = 8.8 Hz, 2 H). MS (ES+) m/z 307.9, 309.9, 311.9 [M+H, 2 Br isotopes] .

In the meantime we’ve collected together some recent articles in this area about 7411-23-6 to whet your appetite. Happy reading!

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; BERCHTOLD, Stefan; GALLEY, Guido; GOERGLER, Annick; JAKOB-ROETNE, Roland; KRUMMENACHER, Daniela; LIMBERG, Anja; NEIDHART, Werner; RATNI, Hasane; REUTLINGER, Michael; RODRIGUEZ SARMIENTO, Rosa Maria; SCHNIDER, Christian; (309 pag.)WO2018/87018; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 1157938-97-0, name is 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 1157938-97-0

a) Preparation of a Stock-solution of lithium-diisopropylamide (LDA) in tetrahydrofuran (THF): Diisopropylamine (716 mg, 7,1 mmol, 1.05 eq) was dissolved in anhydrous THF (21.3 mL) and the resulting solution was cooled to -78 C under a nitrogen atmosphere. Subsequently, -BuLi (2,7 M solution in w-heptane, 2.5 mL, 6.7 mmol, 1,0 eq) was added in a drop wise fashion over 15 minutes and the reaction mixture was stirred at -78 C for an additional 15 minutes. Then the solution was warmed to 0 C and stirred for 30 minutes after which the stock solution was cooled to -78 C again, b) Coupling reaction: The thus obtained LDA-solution (3,66 mL, 0.98 mmol, 1.1 eq) was transferred to a Schlenk vessel and ethylpropionate (100 mg, 0.98 mmol, 1.1 eq.) was added in a drop wise fashion at -78 C under a nitrogen atmosphere. The resulting mixture was stirred at -78 C for 30 minutes and then l-(2,5-difluorophenyl)-2-(lH-l,2,4-triazol-l-yl)ethanone (200 mg, 0.90 mmol, 1.0 eq.) in THF (3.66 mL) was added in a drop wise fashion over 15 minutes. The reaction mixture was stirred for 2 hours at -78 C and then quenched with acetic acid and warmed to room temperature. The mixture was diluted with aqueous saturated NH4C1 and ethylacetate. The aqueous layer was extracted with ethylacetate (2x) and the combined organic layers were washed with brine, dried (Na2S04), filtered and concentrated in vacuo to give a yellow oil containing the racemic ester I with a diastereomeric excess of 29% in favour of the desired RR/SS diastereomer. Further purification by column chromatography (-heptane/EtOAc/MeOH 60/40/5 v/v/v) provided the RR/SS diastereomer (light yellow solid) as well as the RS/SR diastereomer (off-white solid) in a combined overall yield of 179 mg (0.55 mmol, 61%).

If you are hungry for even more, make sure to check my other article about 1157938-97-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; BASILEA PHARMACEUTICA AG; VAN SUMMEREN, Ruben; VAESSEN, Harrie; MINK, Daniel; WASER, Mario; WO2014/23623; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C10H9N3O2

General procedure: TEA (1.20 mL, 8.63 mmol) was added to a solution of N-ethyl-2[3-(5-fluoro-pyridin-2-yl)-1H-pyrazol-l-yl] ethanamine dihydrochloride(0.50 g, 1.63 mmol) in CHC13 (5 mL) at room temperature.5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid (0.36 g, 1.79 mmol)and propylphosphonic acid anhydride (cyclic trimer) (50% solutionin DMF [approximately 1.6 mol/L], 1.32 mL, 2.12 mmol) wereadded to the reaction solution under cooling in ice water. Theresultant mixture was stirred at 50 C for 5 h. After standing untilcooled to room temperature, water was added thereto, followedby extraction with CHCl3. The organic layer was washed with brine.Then, the organic layer was dried over MgSO4 and the desiccantwas filtered off. Then, the solvent was distilled off under reducedpressure. The obtained residue was purified by column chromatography(20-80% EtOAc in hexanes) and washed with Et2O to yieldthe title compound 4a as a colorless powder (0.51 g, 75%).

If you are hungry for even more, make sure to check my other article about 956317-36-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Suzuki, Ryo; Nozawa, Dai; Futamura, Aya; Nishikawa-Shimono, Rie; Abe, Masahito; Hattori, Nobutaka; Ohta, Hiroshi; Araki, Yuko; Kambe, Daiji; Ohmichi, Mari; Tokura, Seiken; Aoki, Takeshi; Ohtake, Norikazu; Kawamoto, Hiroshi; Bioorganic and Medicinal Chemistry; vol. 23; 6; (2015); p. 1260 – 1275;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 22300-52-3, name is 4,5-Dibromo-2H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C2HBr2N3

Step 2. tert-butyl 4-(4,5-dibromo-2H-l,2,3-triazol-2-yl)piperidine-l-carboxylate and tert-butyl 4-(4,5-dibromo-lH-l,2,3-triazol-l-yl)piperidine-l-carboxylate [0261] A mixture of 4,5-dibromo-2H-l,2,3-triazole (2.27 g, 10.08 mmol), tert-butyl 4- (methylsulfonyloxy)piperidine-l -carboxylate (2.79 g, 10.00 mmol), and cesium carbonate (9.75 g, 29.91 mmol) in N,N-dimethylformamide (50 mL) stirred overnight at 100 °C. The reaction mixture was cooled to room temperature, poured into water (100 mL) and extracted with ethyl acetate (2 x 100 mL). The combined organic layers were washed with brine (100 mL), dried over anhydrous sodium sulfate, filtered, and concentrated to afford a mixture of tert-butyl 4-(4,5-dibromo-2H- 1 ,2,3- triazol-2-yl)piperidine- 1 -carboxylate and tert-butyl 4-(4,5-dibromo- 1 H- 1 ,2,3-triazol- 1 -yl)piperidine- 1-carboxylate (4.00 g, 97percent) as a yellow oil. MS (ESI, pos. ion) m/z 411 , 409, 413 [M+H]+. Step 3. tert-butyl 4-(4-bromo-2H-l,2,3-triazol-2-yl)piperidine-l-carboxylate (Intermediate 19) and tert-butyl 4-(4-bromo-lH-l,2,3-triazol-l-yl)piperidine-l-carboxylate (Intermediate 20) [0262] n-Butyllithium (2.5 M in hexanes, 2.92 mL, 7.30 mmol) was added dropwise to a -78 °C solution containing a mixture of tert-butyl 4-(4,5-dibromo-2H- 1,2, 3-triazol-2-yl)piperi dine- 1- carboxylate and tert-butyl 4-(4,5-dibromo-lH-l,2,3-triazol-l-yl)piperidine-l -carboxylate (3.00 g, 7.35 mmol) in tetrahydrofuran (20 mL). The resulting solution stirred for 1 hour at -78 °C, and then the reaction mixture was poured into saturated aqueous ammonium chloride solution (20 mL). The aqueous phase was separated and extracted with ethyl acetate (3 x 20 mL), and the combined organic layers were dried over anhydrous sodium sulfate, filtered, and concentrated under vacuum. The residue was purified via column chromatography on silica gel (eluting with 2: 1, ethyl acetate/petroleum ether) to afford tert-butyl 4-(4-bromo-2H-l,2,3-triazol-2-yl)piperidine-l- carboxylate (0. 800 g, 33percent) as a colorless oil. MS (ESI, pos. ion) m/z 331, 333[M+H]+. [0263] tert-Butyl 4-(4-bromo-lH-l ,2,3-triazol-l-yl)piperidine-l-carboxylate (0.500g, 20percent) was also obtained as a colorless oil. MS (ESI, pos. ion) m/z 331, 333 [M+H]+.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 4,5-Dibromo-2H-1,2,3-triazole, in my other articles.

Reference:
Patent; BAIR, Kenneth W.; HERBERTZ, Torsten; KAUFFMAN, Goss Stryker; KAYSER-BRICKER, Katherine J.; LUKE, George P.; MARTIN, Matthew W.; MILLAN, David S.; SCHILLER, Shawn E. R.; TALBOT, Adam C.; WO2015/74064; (2015); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics